2-Inch Well Problems [What Should You Do]

We may get commissions for purchases made through links in this post.

Nowadays it is pretty common to have a full-fledged well at home. It makes us more self-sufficient. Plus our water bills are less too. But your 2-inch well can stop doing its job effectively. 

What to do when you face 2-inch well problems?

It’s possible to solve your 2-inch well problems. Before that, you have to know the symptoms. After that, the three common problems and their solutions. The first problem is that your well is pumping air. The next problem can be its pumping a large number of sediments. Another problem can be that your well might have low water pressure.

We both know the above information is the peak of the iceberg. Just read the whole article to solve your 2-inch well problem.

Let’s get started!

How To Understand If Your 2-inch Well Has Problems?

These symptoms below will help you to understand if something is wrong with your well. Read the symptoms and try to detect your problem. Some of these symptoms can be seen even if your new well has dirty water.

Anyhow, here are the symptoms-

  • Changes in water quality. Which are frequently accompanied by the abrupt emergence of silt in the water.
  • The casing seal or annulus has failed.
  • Iron bacteria or sulfate-reducing bacteria (biofouling).
  • Contamination is caused by man-made sources.
  • Water quality changes as evidenced by color, odor, or taste. 
  • Aquifer extent is limited, and aquifer recharge is reduced.
  • Iron, hardness, sulfate and manganese concentrations rise.  

Keep an eye out for these signs. If you find any of these, your 2-inch well surely has a problem. As a result, it must be repaired or changed. Problems can sometimes be rectified by simply cleaning the well.

Three Common 2-Inch Well Problems and Solutions

These three issues are extremely common. You could be confronted by any of them. Read them and find out your problem. And also read the solutions below to solve them.

Problem 1: The Well is Pumping Air

Sometimes, the drop pipe is broken in the well pump. The pipe connects the pump to the well’s top and the water system.

Drop pipes are made of iron pipe, poly pipe, or PVC pipe. They can get broken/corroded and develop fractures, or even break apart. This enables air to be sucked in. Then the well starts to pump air.

Solution

This problem cannot be solved by someone unprofessional. A skilled well or pump company should investigate and repair this type of problem.

Problem 2: Pumping a Large Amount of Sediment or Sand

Your water well might suddenly begin to pump sand. This is usually a sign that the well is silting up or filling up with silt and sand.

Typically, the well pump is situated at least 2-inch above the well’s bottom. Now, the water level in the well may decline when the pump is turned on. Sand and sediment might be sucked in if the pump is towards the bottom of the well.

Other reasons for sand in water can be damaged well screens. Because this allows sediment or sand to enter from the gravel pack surrounding.

Solution

It is necessary to conduct troubleshooting. Sediment or sand catcher can be used to solve this issue. 

A filter screen with a mesh size of 60 mesh and an automatic purge valve will work. This can remove sand from the water pipe too.

Problem 3: Water Pressure Is Low

It’s possible that you’re not getting enough water from the well. This could be due to a variety of reasons.

The reasons can be a failing well pump or a jammed check valve. Or a partially faulty gate/ball valve or a leaking/failed pressure tank can be responsible too. 

Iron bacteria can clog the pipe that leads to the pressure switch in unusual conditions. This will be causing the pressure switch to inaccurately sense pressure. As a result, the well will have less water pressure.

Solution

For this, you have to take professional help. Because if you do it yourself, you may end up causing more damage. As a result, you might have to replace the well pump due to low water pressure

Simply clean the well if your well water contains a high concentration of iron bacteria. You can use a specific solution for this.

These solutions are designed to eliminate iron germs, sludge, and scale. Cleaning the well with them will be perfect.

We have some cleaning solutions for you here. You can buy any of them to clean your well screen.

Product 1 
Product 2
Product 3

Buy any one of the products to get your desired result.

The above problems are super common in 2-inch wells. If you are facing any of them just follow the solution. It will be solved!

FAQs

Question: What is the expected life of a well?

Answer: Well design that considers present and future expenditures might help owners save money. A water well’s design should take into account the expense of the well over its full life. The life expectancy of a well can range from 25 to over 100 years.

Question: How deep should a well for drinking water be?

Answer: The quality of your water is determined by a variety of factors, including water levels and geology. Your well depth should be at least 100 feet to allow for optimal ground filtration to eliminate pollutants. In general, the deeper you drill, the more likely you are to find minerals.

Question: Can your well water ever run out?

Answer: Well water, like any other resource, can deplete if not properly monitored and maintained. It is unlikely that a well will ever be depleted. 

Bottom Line

We have reached our final milestone. Now you know your 2-inch well problems and how to fix them. 

Hopefully, your problems will be solved quickly!

Thank You for reading!

Richard Allen