Did you accidentally spill some bleach over your new carpet? Although this may be enough to give you a heart attack, we’d advise you against it. A slip of the hand can happen anytime. What’s important to know is that this damage is reversible.
If how to get bleach stains out of carpet is on your mind, you’ve landed in the right place.
Simply pour cold water over the area asap to dilute the bleach. Then blot it and clean with detergent or vinegar. Blot the area again and give it a final clean up. Don’t forget to dry the area to reduce any water damage.
Now that didn’t seem hard at all! So if you have a few minutes to spare, let’s take a look at the steps in detail.
How to get bleach stain out of carpet?
Step 1: Soak up the excess bleach
Since bleach has a risk of discoloring your carpet, your first priority is to remove the bleach as much as possible. This way, you’ll reduce the discoloration that will occur later on.
To do this, first, splash the area with some cold water. While this will drench the carpet, it still reduces the strength of the bleach and thus controls the damage.
If you do this in time, you can significantly reduce the discoloration and damage on your carpet. Next, take a rag and blot the area. This will soak up the excess bleach.
Although remember to blot it gently and don’t use pressure. Or else, you may risk pushing the bleach deeper into the carpet. Moreover, don’t rub or scrub the area at this point.
Step 2: Use a homemade cleaner
Next, use a cleaner to remove the bleach from the carpet. At this point, you have two options. You could either choose a detergent or a vinegar mix to clean the bleach out of the carpet.
Both of them work really well to remove vinegar discoloration and stain, but take precautions.
Some brands of bleach may react negatively to vinegar. So it’s always a safe idea to read the packaging and act accordingly
Some good old detergent can come to use when it comes to any kind of stain. Even when it comes to cleaning dirty carpet edges, detergent comes to rescue!
The best part about detergent is that it’s mostly safe to use on all kinds of stains and marks.
To make this simple and easy solution, mix 1 tablespoon of detergent to 1 cup of water. If you have a larger stain, then just double the amount.
Mix this solution well and your bleach removing solution is ready. Pour it over your stain and keep it on for 30 minutes until the stain starts to lift.
Vinegar is also another such household item that has tons of uses. From whipping up salads to removing stains, vinegar is like that overachieving cousin who does it all.
It’s even great for getting rid of sticky feeling from carpet.
To make this simple solution, take 2 tablespoons of distilled white vinegar and mix it with 4 cups of water.
Mix this solution well and put it in a spray bottle. Spray it liberally on the stain and wait for 20-30 minutes.
Step 3: Blot the area and sprinkle some salt
Now that the stain has lifted, blot the area and sprinkle some salt on it. This is an important step after washing even when it comes to removing kinetic sand from carpet.
Seems a little weird to you?
Not at all. Salt has properties that can naturally draw out moisture from anything. So by sprinkling this household item, you can also draw out excess bleach from the carpet.
Sprinkle the salt generously and leave it on until the moisture is all soaked up. Then you can vacuum the salt away and you’ll be left with a much cleaner carpet.
Step 4: Clean the area
Lastly, clean the area with some plain water. This will ensure that your carpet is free from all the cleaning agents like detergent and vinegar.
When these residues stay behind, they can damage and reduce the life of your carpet.
Moreover, there are plenty of benefits of cleaning carpet regularly. So there’s nothing to lose.
Step 5: Dry the area
Don’t forget to dry the area after you’re done with cleaning it. Just like it’s crucial to protect carpet stairs from dirt, it’s also imperative to dry the carpet after you’ve cleaned it.
Vacuum the area after you clean it. Moreover, you can leave the fan on.
Question: Can you fix bleached carpet?
Answer: If the damage is already done, then there are two ways to fix this stain. Firstly, you can use some bonded insert patch with a strip of matching carpet. Or you could stain the carpet a matching color of the original carpet with some crayon or hair dye.
Question: Why does my carpet look worse after cleaning?
Answer: Sometimes your carpet may look worse after cleaning due to a buildup of some residue or your carpet wicking. If this is the problem, then it can easily be fixed. Clean the carpet well with water after you use the cleaning agents. Moreover, scrubbing and shampooing can bring your carpet back to good condition.
And that comes to the end of our guide. If you drop some bleach on your carpet, don’t sweat it.
With our guide on how to get bleach stains out of carpet, you’ll easily get rid of it in no time. We hope that we dissolved some of your fears and doubts on the issue.
If you have any lingering questions, don’t hesitate to ask us in the comments below. Until then, stay happy!
- Can You Use A 15 Amp Switch On 20 Amp Circuit? [Answered] - April 8, 2021
- Can You Place Carpet Over an Asbestos Tile? 3 Ways for Installation - April 8, 2021
- Cutting Ductwork With a Jigsaw [A Step By Step Guide] - March 16, 2021