Skip to Content

How to Clean Stone Pebble Shower Floor [6 Easy Steps]

This article is for informational purposes. Always seek the advice of qualified professionals.

So pebbles at the shower place may be the most aesthetic-looking element at the shower place. But cleaning the pebble floor can be a very big hassle for maintenance.

How to clean the stone pebble shower floor?

Now in order to explain the process, let’s start it from the first. Create a vinegar mixture, then apply by spraying. Next scrub the floor and grout. Rinse the floor and try removing the stains. Lastly, dry it out to complete cleaning.

Sounds easy, right? Let’s look into the details to help you get it done. This may look like a lengthy project to start with. But trust me these will get done in no time.

Cleaning Stone Pebble Shower Floor [6-Step Solution]

The process of cleaning may look like a lot of work to you. But let me assure you the process of cleaning pebbles will get so much easier. Only if you follow these steps and cooperate.

Step 1: Create The Vinegar Mixture

In a spray bottle, combine 1 part vinegar and 16 parts water. That is you should be mixing it in the lowest possible ratio. Since vinegar is highly acidic. However, we are not using bleach, we don’t need anything to remove the smell.

Step 2: Spraying Vinegar 

Using a spray bottle, saturate the pebble surface with vinegar water. Allow it to set for a few minutes. This is to assist in the removal of soap scum and hard water deposits.

Step 3: Scrubbing The Grout

Using a nylon-bristle scrub brush, scrape the pebbles. Do this for grouts around the stones and into the corners too. 

It has to be done in a circular manner.

Step 4: Rinsing the Floor

Turn on the shower and run warm water over the shower floor. You can also use the steam effect to rinse the shower. 

Temperature and humidity are favorable for rinsing the floor. 

Step 5: Removing Stains

According to the directions, remove stubborn stains using acid and water. The mixture contains 1 part hydrochloric acid hydrogen chloride to 10 parts water. Then scrub it with a scrub brush. 

When mixing and using hydrochloric acid, wear rubber gloves and safety eyewear. Definitely make sure the room is ventilated by turning on the bathroom fan. You can also open neighboring windows. 

However, cleaning pool cement with chlorine may take much longer than vinegar.

Step 6: Dry out The Floor

Using an old terry towel, dry the floor to avoid wet marks. Drying the floor will avoid any sort of movement inconvenience and accidents. So rather than slipping on the floor, you must wait for it to get dry. Dry your pebble shower floor with a gentle towel or a blow dryer after washing it. This will assist you in avoiding areas that may remain.

Drag a vacuum over your pebble shower floor. This will help to avoid damaging the sealant. But it may be causing obvious damage to the stones.

These are the six easy steps to clean the pebbles at your shower place. 

Now you may not want to make a cleaner by yourself. Here’s something for you to make these products:

Product 1
Product 2

These are the recommended products that can be used in order to make cleaning easier. 

So now, you know how to get the cleaning, might take interest in sealing them. Sealing has to be followed using a definite technique.

Sealing and Protecting Your Pebbles

Most pebble shower floors are constructed of natural stone. It’s delicate to take adequate care of them to avoid damage. Spot cleaning should always be done with soft cloths or sponges. This is done to avoid scratching the stones or harming the sealant. 

If you use an abrasive cleaner, the pebble sealant will be stripped away. The harm is caused to the pebbles beneath.

The sealer is the key to a beautiful, long-lasting pebble shower floor. 

Natural stones, like sponges, have thousands of microscopic holes. They readily absorb fluids, implying that they will readily absorb into the sealant. While placing, soap scum and other unattractive residues can be kept at bay.

Grime is the element on pebbles to maintain the shine. Grime should quickly wash down the drain rather than adhering to the pebbles. Sealant is crucial in keeping your pebble shower floor in good shape. 

Excess buildup can get removed with a fast wipe-down with a soft towel or cloth. The stones and grout should stay beautifully sealed for a long time as long as you don’t use anything too abrasive. 

However, you don’t have to use sealants when cleaning tiles

FAQs

Question: What is the best cleaner for a natural stone shower floor?

Answer: Once a week, use pH-neutral cleaning products. For example, like Simple Green All-Purpose Cleaner to clean natural stone layers. The powerful cleaner eliminates soap scum, body oils and greases, bath oils, soap, and shampoo oils while removing stubborn soils.

Question: How do you clean stone tile floors?

Answer: Clean stone surfaces using warm water. Add a few drops of neutral cleaner, stone soap (special Lithofin products, for example), or dishwashing detergent. For optimal results, use a clean soft cloth. A film of cleaner or soap may form streaks.

Question: What is the best way to remove mold from a natural stone shower?

Answer: Bleach is the only way to get rid of mildew and mold indirectly. After spraying, use a bristle brush to gently scrub the area, then soak for 10-15 minutes before rinsing with warm water.

Conclusion

So now I hope you know how to clean the stone pebble shower floor. This should motivate you in cleaning the pebbles and grouts yourself. See how the magic works!

So no need to worry anymore, things will go just fine. Trust me you got this!

Now let’s get to work. Good luck with cleaning!