You’re tired right? Scrubbing is a fairly easy method but it’s way too time-consuming. Plus it can sometimes damage your tiles.
How to clean shower tiles without scrubbing?
You can clean shower tiles by mixing vinegar and dishwashing detergent. Mix them and pour in a spray bottle to spray clean the tiles. In a similar way, you can use hydrogen peroxide and baking soda mixture. If neither of these methods is good enough for you, use clorox bleach.
If you’re still confused about the process, don’t be. We have an in-depth guideline waiting for you in our article.
What are you waiting for? Jump right in-
- Why Does Your Shower Tile Get Dirty So Frequently?
- Clean Shower Tile Without Scrubbing: 3 Foolproof Methods
- Method 1: Dishwashing Detergent and Vinegar
- Method 2: Baking Soda and Hydrogen Peroxide
- Method 3: Use Clorox Bleach
- Final Words
Why Does Your Shower Tile Get Dirty So Frequently?
Are you tired of cleaning your shower tile 2 times a week?
Well, this can be a serious problem. Because dirty shower tiles can ruin your tiles permanently. This will also be a reason for your bathroom smelling musty.
Every homeowner faces this problem one time or another. That’s why you should know the reasons for this happening. This way you won’t have to clean your shower tiles every day.
There are a few common reasons why your shower tile gets dirty. These are-
If you take a shower when you’re too dirty, this will surely deteriorate your tiles quickly. Some people might also wash their pets in the shower. This dirt will fill up the gap between your tiles. As a result, your shower will look dirty.
Any kind of cleaning agent can leave your shower tiles in bad condition. This only happens if you leave the shower floor unwashed. The type of things that cause this includes any kind of soap, handwash, shampoo.
If your tiler didn’t properly buff off grout, you might face this problem too. The invisible layer it creates will attract dirt and hold it to the tile’s surface.
Even if the dirt is washed away, the grout remains dirty and attracts more filth. That’s why before cleaning shower tiles you have to clean your unsealed grout.
Clean Shower Tile Without Scrubbing: 3 Foolproof Methods
Now that you know what causes your shower tiles to get dirty, you might want to clean it. Scrubbing can be a long and hard process.
That’s why we have a few alternatives for you-
Method 1: Dishwashing Detergent and Vinegar
This is one of the quickest and easiest methods for cleaning your shower tiles. Vinegar is an excellent cleaning agent to clean shower tiles. Because of the vinegar’s acidity, all dirt, stains and soap scum will be removed.
To move on with this process, you’ll need a few pieces of equipment. All the necessary equipment you’ll need is very easy to find.
- Dishwashing detergent
- Spray bottle
Got them? Let’s start cleaning-
Step 1: Prep your Shower Tiles
Before you do any kind of cleaning it’s important to pre-treat your shower tiles. To do this, run the shower at its highest temperature and wait for 4-5 minutes. Any sticky dust and grime will be loosened by the extremely hot water and steam.
Once you’re done, turn off your shower. Wipe your shower tiles with a rough textured clean cloth. Rub the cloth in a circular motion.
Be careful when you’re turning your shower on and off. If you’re paying attention, you can burn yourself.
If your shower cable overheats frequently, it’s better to skip this step. Get your shower cable fixed first.
Step 2: Mix Vinegar & Dishwashing Detergent
Take equal amounts of vinegar and dishwashing detergent. Mix them perfectly in a spray bottle.
To help you we have recommended some good quality dishwashing detergent. Feel free to use them if you like-
Once the mixture is ready, heat up the bottle just so it becomes warm. But don’t overheat the mixture, this will ruin the acetic components of the vinegar.
Step 3: Spray and Rinse Off The Mixture
Use your spray bottle and spray the solution in areas with the most dirt. Make sure that all tiles with stains are covered up perfectly.
Once you’re done, let the solution sit on your tiles for 1 hour. Rinse the mixture off perfectly afterward. Make sure you rinse off all the remaining solutions. If you don’t, the solution will damage your tiles.it
Method 2: Baking Soda and Hydrogen Peroxide
Hydrogen peroxide and baking soda are like a power couple when it comes to cleaning. They are also the two most easily found items to clean out your dirty shower tiles easily.
Not only this, both of them are cheaper than store-bought cleaners. That’ll save you both time and money. Let’s see how you can use them-
Step 1: Create The Mixture
You might want to clean mildew and mold from the shower tiles. In that case, mixing hydrogen peroxide with water is enough. Mix hydrogen peroxide and water in a ratio of 1:2.
For stains and soap scum, use baking soda and hydrogen peroxide together. Mix equal amounts of both hydrogen peroxide and baking soda.
Step 2: Spray and Rinse Off
Put your mixture in any spray bottle. Spray the solution in places where you see mold growth. Leave the tiles for 30 minutes. After that, rinse off the solution using a scouring pad.
This paste will be quite thick. This will clear out all the stains, leaving your tiles shiny and polished.
Method 3: Use Clorox Bleach
If you’re not comfortable with any of these two methods, use clorox bleach. But keep in mind this should be your last resort.
That is because bleach is a harsh product. If you use it on your tiles regularly, your tiles might get damaged. Anyhow, let’s look at the steps-
Step 1: Prepare The Mixture
When you use bleach, always make sure you mix them with water. Mix bleach with hot water in a ratio of 1:4 and scrub all over your molded tiles.
Step 2: Spray and Rinse Off
Allow it to sit for about 1 hour and scrub it off afterward. When scrubbing off the bleach, make sure you wear gloves. Using bare hands will cause permanent damage.
These were the three simple ways to remove diet, mold, stain without scrubbing.
By the way, along with your bathroom tiles, you should keep your toilet clean too. This way you can have a fully clean bathroom in an hour.
Question: How to deep clean a tile shower?
Answer: Remove the showerhead from the wall. Soak it in a 50/50 solution of white vinegar and water in a basin or a plastic bag. The vinegar will aid in the removal of surface residues. It’ll also remove any blockages that are preventing water flow.
Question: How to make my shower tile shine?
Answer: You can spray furniture polish or lemon oil on the surface. Then buff it with a delicate microfiber cloth. The shining tiles remain after the furniture polish has been removed completely.
Question: How to clean my cloudy tiles?
Answer: In a bucket, combine equal parts vinegar and water. Scrub the tiles with a damp sponge dipped in the solution. Remove the misty haze from the tile with a little force. Make sure to clean the grout lines as well. Because these are the source of the cloudiness.
We have explained how to clean shower tiles without scrubbing. Hopefully, you have decided which method to apply.
These are all easy methods that will save your time and effort. But, you can always ask a professional for help if these methods aren’t enough.
We wish you all the luck in fixing your problem!
- Spray Foam Under Shower Pan [Step-By-Step Guideline] - October 14, 2021
- Furnace Flame Goes Out When Blower Comes On [Answered] - October 14, 2021
- A Complete Guide On Flower Bed Drainage - October 14, 2021