Skip to Content

How To Clean Travertine Shower Mold [Everything You Should Know]

Travertine is ideal for a moist environment since it’s formed naturally by complex water droplets. It’s aggravating when your expensive and one-of-a-kind travertine shower mold doesn’t look pleasing.

How to clean travertine shower mold?

Sealing the floor when it’s new is the most effective approach to kill mold and mildew. Always attempt to keep your shower as dry as possible. Clean the shower with an alkaline-based solution if necessary. Always clean with blotting paper. You should never spread spills while wiping.

You’ll need extensive instructions to understand everything completely. There’s also this whole article that will lead you through the thick and thin.

Are you curious? Then continue reading!

Reasons For Mold In Travertine Shower

Mold flourishes in a humid, soggy environment, so it’s only natural that it develops in the gloomy, humid confines of your bathroom.

Keep in mind that water contains soap and other elements placed straight on the stone. Any humidity left behind may foster mold and fungal growth, weakening any sealant. 

Cleaning Process: A-Z Guide

It’s essential to always keep your travertine shower. Not only because it’s expensive, but also, it’s quite unique and beautiful.

Before installing a travertine shower, you should know the cleaning process and some maintaining techniques. Here I’ll explain all the necessary tools you should know beforehand.

Sealing

The first step you need to complete after installing is to seal the travertine floor. It’s preferable if you perform it under the supervision of a professional.

Cleaning

After installing the travertine floor, the subsequent work is to clean the floor. Before using any cleaner, brush the floor to eradicate loose dirt such as – soil.

Remember you have to use a mop which has soft fibers. Any harsh material can cause damage to your newly installed travertine floor. Which you don’t want, right?

Scouring

You can’t rub your travertine floor absurdly rigid. It might impair your unique floor.  

There are some techniques which you can follow during floor cleaning.

Use a soft towel in replace of a brush or scrubber.

Mix the mild dishwasher with lukewarm water until it’s bubbling.

Wipe the travertine floor with smooth, even motions after dipping the broom into the mixture and drying it out entirely.

Wipe out the excess water using a soft cloth. After that, an air dryer is most preferable. 

Leave your travertine shower for an air dryer.

Brightening

The removal of exterior scrapes and polishing of the travertine floor is a delicate process. 

A diamond buffing sponge can be used to heal the damage. Begin by scrapping with a 120-grit paper.

While following this step, you’ll need some scrapping paper. Here’re some recommended products for you:

Product 1
Product 2

If you can still see or feel it, switch to the higher grain stone cleaning cushions that come with it. Carry on in this manner until the scrape is gone.

Currently, mix 1/4 cup dishwasher soap with water until a frothy consistency is achieved.

Wipe down the area and wipe away the water with a microfibre cloth. Clean the area with ideal, warm water before wiping it clean with another immaculate rag.

Removing Mold

Mix 1 portion of baking soda to 4 portions of borax and 8 portions of water. Store it in a mist bottle and spray it onto the affected area. Wait for 15 minutes.

Use a microfiber cloth to clean because microfiber cloths have exceptional quality. If you still see it, spray onto the affected area again and wait for more than 30 minutes. 

And repeat the same process to clean.

Don’t forget to clean the area with runny water—dry well with a soft rug.

Removing Stubborn Spatter

You may use hydrogen peroxide to eliminate persistent residues from your travertine shower tiles, but be cautious when washing bolder tiles because peroxide can fade colors, so always test in a hidden area first.

Tough spots can be treated using bicarbonate of soda poultice sprayed to the mark for about 15 minutes, then wiped off and well dried.

Cleaning Naturally

A must thing is to maintain a regular cleaning routine. Nothing can replace this technique. Mop the shower after using it to avoid dirt in the grout.

Don’t try to clean the whole area using the same mop. Change it or clean it frequently.

Must keep the area dry. A dry area will prevent mold.

Take Professional Help

Professional advice for a thorough inspection is a good choice, as they have the proper tools to extract the hardest embedded grime from your surface. 

That’s all!

FAQs

Question: Can we use vinegar for travertine?

Answer: You Can’t use vinegar. Also, avoid ammonia and lemon for washing travertine. Use a sponge with warm water and a stone washer are the only elements to use. Avoid using a shared bathroom,  tile, or grout cleaner. Abrasives in the powders and even the “mild” treatments will damage and degrade the surface.

Question: Is baking soda safe to use on travertine?

Answer: Add a touch of your daily cleaning product to equivalent parts water and baking soda. Scrape into the travertine tile or slab you’d like to clean until it’s creamy. Then, apply a liberal mix application to the stain’s surface area and let it sit for 15 to 30 minutes.

Question: How often should travertine be resealed?

Answer: Approximately every one to two years. Travertine is a robust and durable natural stone, yet even the most substantial elements require care and compassion. Keep your external travertine tile in good shape by sealing it every one to two years to preserve it from harm and keep it looking original.

Final Words

After an elaborate discussion, I came to an end. By this time, you already know how to clean travertine shower mold. I’ve tried to gather all the information together.

Maintaining a travertine shower isn’t difficult anymore. Follow the instructions according to your needs. If necessary, go for professional help.

Good luck with your favorite shower room!