Skip to Content

How Much Does It Cost To Build A Fence [Explained]

Fencing is done to ensure the privacy of your house. It also adds security. But who wants to have a relaxed time on their lawn with other people staring?

How much does it cost to build a fence?

The cost depends on a lot of factors. A 150-foot-long privacy fence costs between $1,950 to $7,500 for a standard 1/5-acre yard. On average, pricing for materials ranges from $8 to $25 per linear foot. Labor costs anything from $5 to $15 per linear foot. Expect to pay an extra $300 to $500 if you need to remove your present fence.

I hope this is what you’re looking for. If this is it, then you’ll find all you need to know in this article.

So without delay, let’s dive right in!

Fence Building Cost: Linear Length Based

The cost of setting up a fence depends on a lot of factors. One of them is the length of land you are willing to cover. You’ll have to cover the entire part of your lawn. 

Your lawn might contain swings or a swimming pool. And besides privacy, if you want to maintain your pool, a fence adds a great advantage. It will partially decrease the dust and rubbish to get in your pool water.

The following is a table that will show you the cost of fence based on the area of your land-

Length (feet)Low-End CostAverage CostHigh-End Cost
50$650$950$1,250
100$1,300$1,900$2,500
150$1,950$2,850$3,750
200$2,600$3,800$5,000

So you see, the cost has a wide range. It’s because the length you want to cover is only a small factor. The main price differs in the material you want to use for fencing. The style of fencing or additional demands like fence gates impacts the cost. 

Fence Building Cost: Privacy Fence Cost

The price of a normal fence and a privacy fence are different. Even though there are some problems with privacy fencing, a lot of people prefer them. A 150-foot-long privacy fence costs between $1,950 to $7,500 for a standard 1/5-acre yard. Most homeowners spend $2,711 on average. This is dependent on the material selected. 

Here’s a small table where I broke down the cost of the fence. It also contains the potential labor cost. So have a look-

Type of MaterialLow-End CostMedium CostHigh-End CostAverage Labor Cost
Chain-link$4$10$15$5 – $15
Bamboo$8$10$11$7 – $14
Wood$8$12$15$5 – $12
Vinyl$20$23$26$5 – $10
Aluminum$20$23$25$5 – $15
Wrought Iron$25$30$35$5 – $15

So now that you gained an idea about the costs, let’s see how the costs are set. 

Chain-Link Privacy Fence

On average, chain link privacy fences cost $1,200 to $3,100. These simple, low-cost constructions have a long lifespan and require little care.

It’s useful and long-lasting, but it’s not attractive. It’s also one of the simplest materials for a self-doer to install. Because it’s the most cost-effective, metallic-coated is most often used. Materials for black chain link fencing range from $5 to $25 per foot.

Bamboo Privacy Fence

Bamboo privacy fences cost $15 to $25 per linear foot on average. Materials and labor account for around half of your entire cost. On average, you should expect to pay between $1,500 and $2,500 for a 100-foot bamboo fence.

Wooden Privacy Fence

The cost of installing a 6-foot tall wooden privacy fence ranges from $1,950 to $4,050. Most homeowners spend around $2,755. The cost of a piece of wood varies greatly based on the type of wood used. The most prevalent type is pressure-treated pine wood. It costs around $17 per linear foot to install.

Vinyl Privacy Fence

Installing vinyl privacy fences costs between $3,750 and $5,400. The average cost per linear foot ranges from $25 to $36. Materials are normally twice as expensive as wood, but they endure twice as long. It has a guarantee and requires little maintenance.

Wood Vs Vinyl Privacy Fence

Both vinyl and wood fences are available in a variety of styles and materials, which impact the price. Vinyl materials are typically twice as expensive as wood. Professional labor, on the other hand, will cost around the same.

A wooden privacy fence with the same dimensions will cost between $1,950 and $4,050. Whereas, you’ll need to spend between $3,750 and $5,400 on vinyl. The labor costs are included which are around $750 – $1,800.

Aluminum Privacy Fence

The cost of installing an aluminum privacy fence varies from $25 and $40 per linear foot. Materials are accountable for around 70% of the total cost. This comprises employing 6-foot tall vinyl fence panels and placing posts in concrete at 8′ intervals. 

The range of installation and labor costs is very wide. And so, certain aluminum fence quotes may need an on-site assessment.

Wrought Iron Privacy Fence Cost

You can’t make a privacy fence fully made of wrought iron. You have to employ wrought iron fences at 8’ intervals. And in between, you can use wood. Doing this 150 feet might cost you more than $3,750.

This is how you can see the price variations of different materials for a privacy fence. 

Fence Building Cost: Fence Type Based

The average cost of installing a fence is $2,500. But you have the option of spending anything from $430 and $10,000 or more. This is dependent on your size as well as the kind and style you select. 

The cost of materials alone ranges from $7 to $30 per linear foot. This works out to $1,000 to $4,500 for a normal 150-foot length.

Fences come in a wide variety of styles and costs, ranging from $13 to $50 per linear foot on average. Materials alone might cost anything from $1,200 to $7,500 for a 150-foot fence. This involves labor expenses of between $750 to $2,250.

Here is a small table breaking down the expense in short based on the material used:

Material TypeAverage CostLabor CostTotal Cost Per Linear Foot
Wire$1.20 – $1.40$0.40 – $0.60$1.60 – $2.00
Chain-link$4 – $15$5 – $15$9 – $30
Wood$8 – $15$5 – $12$13 – $27
Vinyl$20 – $26$5 – $10$25 – $36
Steel$25 – $35$5 – $15$30 – $50
Split Rail$10 – $15$5 – $10$15 – $25
Aluminum$20 – $25$5 – $15$25 – $40
PVC & Composite$17 – $23$5 – $10$22 – $33
Farm & Ranch$8 – $12$5 – $15$13 – $27
Wrought Iron$25 – $35$5 – $15$30 – $50

So now that you’ve got an idea about the cost, let me tell you why the costs are set like that. This will help you understand which one you actually need.

Wire

With 5-wires, a woven-wire or barbed-wire fence costs little under $2 per linear foot to erect. Wire fence comes in a variety of gauges and designs. You may also select the number of wires you want. Wire fence is ideal for home improvement tasks like gardens and pet and animal cages.

It comes in rolls and is ideal for protecting small animal spaces, gardens, and tree trunks. It prevents rabbits, stray dogs, and other pests out of your garden and property.

However, it doesn’t provide you with much security.

Chain-link

The cost of installing a chain-link fence varies between $9 and $30 per linear foot. The majority of them cost between $1,350 and $3,900 on average. Galvanized steel or black vinyl-coated steel chain-link fence is available in heights ranging from 3′ to 12′. 

A chain-link fence with a black vinyl coating costs $10 to $34 per foot. To put it another way, it costs 10% more than regular galvanized steel.

Wood

For a conventional 150-foot fence, wood fence construction costs between $13 and $27 per linear foot. On average, a wood picket fence costs $1,711 to $3,290

The average cost of installing them around a property is $2,755. The type of wood you choose or the size of your fence affects the costs of installation. The layout, design, and labor costs also affect the price.

The following are some of the most commonly used wood for making fences-

Type of WoodAverage Cost (Per Linear Foot)
Tropical Hardwoods$6 – $15
Redwood$4 – $7
Spruce$4 – $6
Pine$3 – $7
Cedar$4 – $8

Pressure-treated pine is the most affordable type of wood fence. The price per linear foot ranges from $3 to $7. The supplies for other woods range from $4 to $15 per linear foot. 

The less expensive the wood is, the less structural integrity it will provide. It’s also less resistant to decay and degradation.

Vinyl

The cost of installing a vinyl fence ranges from $25 to $36 per linear foot. A 150-foot fence costs most houses between $3,750 and $5,400

Vinyl is both environmentally friendly and low-maintenance. It’s extremely durable and available in a range of colors. That’s why it’s used in a lot of projects. For example – vinyl is great for kitchen floors.

The disadvantage is that a vinyl fence is rather expensive upfront. However, it has a life expectancy of 20 to 30 years. And that makes up for the cost in the long run.

Steel

The typical cost of a corrugated metal or steel fence is $30 to $50 per linear foot. The cost of raw materials and skilled installation for a standard 150-foot metal fence is from $4,500 to $7,500

Steel is a highly durable and easy-to-maintain material. Metal, on the other hand, is costly and will eventually scratch and corrode.

Split Rail

The cost of a split-rail fence is usually between $15 and $25 per linear foot. Alternatively, for every 100 feet of fence, expect to pay between $1,500 and $2,500. The number of rails you employ will have a significant impact on your ultimate cost. 

You should anticipate paying anything between $1 and $4 per linear foot for each rail. Split rail fence has traditionally been made of wood and is commonly found on farms and ranches. 

PVC, on the other hand, is gaining popularity because of its extended lifespan and low maintenance requirements.

Aluminum

A 150-foot metal fence costs roughly $4,500 to build for the average household. The costs per linear foot range from $25 to $40. Aluminum and metal fences are less common than wood and vinyl because of their expensive pricing. Aluminum, on the other hand, lasts a long time and requires little maintenance.

PVC & Composite

PVC or composite fence costs between $22 and $33 per linear foot on average. The average cost of a 150-foot fence is roughly $3,750. Different types of PVC are often sold in 6′ wide panels, and vinyl posts are installed in 3′ deep concrete holes. 

Materials, fasteners, post concrete, and connections are all needed to build a PVC fence. PVC does not rot, deteriorate, or become damaged by insects. It will also not mold or mildew, and it will not need to be repainted. 

Most well-placed PVC fences should last at least 15 years.

Farm & Ranch

On average, farm fences cost $1,700 to $2,500. Wood and vinyl farm and ranch fences range in price from $13 to $27 per linear foot. Pipe costs $8 to $10 per foot, whereas wire fence costs as low as $2 per linear foot. This covers all supplies as well as installation by a professional. 

A horse fence is an excellent choice for holding cattle and other livestock at a low cost. The expense of maintenance is minimal, and it may endure for up to 20 years.

Wrought Iron

A wrought iron fence can cost anything from $30 and $50 per linear foot. For a 150-foot fence, rates range from $4,500 to $7,500. Materials account for 75 percent of your total expenses on average. 

Customized designs are available for a wrought iron fence. It may be used to surround pools or used with brick columns to give a luxurious appearance. 

Iron fencing is quite durable. It will, however, require maintenance, such as sanding and repainting every 24 to 36 months. This is done to keep rust at bay.

Undetectable Electric Fence

Many undetectable electric dog fences may be found for $150 to $350 at local pet stores. In addition, each fence receiver collar costs $50 to $80. Electric fences may also be used to keep horses and animals contained on a ranch as a security measure.

These were the different types of fences based on the material and purpose. You should understand what type is suitable for you. Installing a fence can cost anywhere from $5 to $15 per linear foot. This depends on the quality of the material used. 

Labor expenses will account for 30 to 50 percent of the total cost of a conventional fence. Installing 100 linear feet of fence takes an average of 15 hours for a skilled fence constructor. It’s always better to do this with the help of a professional. DIY steps might result in irregularity and more time. 

Before you hire a professional, make sure to see his profile. Set the time you are ready to give him before he starts.

Fence Building Cost: Setting Up a New Fence

A new 150-foot fence costs an average of $2,250 for wood. It costs $3,000 for chain-link, $3,750 for vinyl, and $5,250 for wrought iron.

Material

Depending on the materials used, fencing materials can cost anywhere from $5 to $35 per linear foot, with most homeowners spending between $8 and $15 per foot.

Labor

The cost of labor to erect a new fence ranges from $5 to $15 per linear foot on average. Fencing specialists might be hired for $50 to $70 per hour if you’ve previously purchased the materials.

Permits

Permits to construct fences range in price from $40 to $150 on average. To find out if permits are necessary, contact your local building department. Inquire with your homeowner’s association as well. 

The majority of reputable contractors will be well-versed in the area’s regulatory compliance difficulties. They will be able to inform you if one is necessary and will guide you through the procedure.

Buried Utilities

To secure the fence posts, your contractor will need to drill holes in the earth. You’ll need to make sure you know where any underground utilities are and that they’re clearly marked. This is to prevent damage and service interruptions.

To avoid hitting any subsurface pipelines or wires, always call 811 before digging. Failure to contact might result in the homeowner having to pay for costly utility repairs.

Fence Post Cost

The typical cost of hiring a handyman to install fence posts is $40 to $150 per post. The depth, setting, and spacing all play a role. 

The majority of fence contractors will not replace or repair fence posts. Only if it’s part of a new fence installation would they install it. 

For wood fences, most fence posts are put in concrete at an 8-foot spacing. And, depending on the contractor, a 6-foot spacing for a vinyl fence.

Survey

A land surveyor will come out and mark your property borders for an average fee of $380 to $540. He’ll also show you exactly where your fence may be built lawfully.

Land Leveling

If you’re having trouble with uneven terrain, you’ll need to level or flatten the ground. This must be completed before a fence can be properly erected. Regrading a yard costs $0.40 to $2.00 per square foot. Clearing land is very important before fencing.

Removing Existing Fence

The cost of removing an existing fence will range from $100 to $1,000, with an average cost of $500. This is something that your contractor may include in their quotation.

Fence Gate

The majority of fences require gates. The cost of installation varies depending on the gate’s height, design, and material. The cost of setting up is influenced by the number of gates you want to be placed.

Adding a fence gate will cost between $100 and $650. Expect to pay up to $6,500 for a high-end driveway gate.

Accessories

For an extra fee, you may add solar or post cap lights to your fence. A high-end iron fence with brick posts might also benefit from a keypad entrance with automated admission.

That’s what you’ve to know if you want to build a fence for the first time.

Fence Building Cost: Replacement Cost

The cost of replacing a fence is nearly the same as the cost of building a new one. It will cost you between $12 and $25 per linear foot on average. You’ll have to pay an extra $3 to $5 for each linear foot to remove your old fence. 

The cost of installing a fence is determined by the length of the fence. The height of the fence, the number of posts, and the type of fencing material used all have an influence.

Fence Building Cost: DIY Vs Professional

The materials cost $8 to $15 per linear foot on average. Additionally, anticipate putting in at least a week of work to erect your fence. You’ll also have to pay a one-time price of $200 to $500 for all of the necessary equipment. A measuring tape, drill, saw, hammer, auger, or post hole digger are the required tools.

When you hire a professional, you can expect the task to be completed in half the time. In addition, labor expenditures range from $5 to $15 per linear foot. It also comes with a warranty. Labor will cost between $750 to $2,250 for a 150-foot fence.

So it’s entirely up to you if you want to spend a little more money to save time.

FAQs

Question: How long will it take to build a fence around my house?

Answer: Installing 100 linear feet of fence takes an average of 15 hours for a professional fence contractor. If you do it yourself, you might need several days.

Question: Why is it necessary to set up a fence in a new house?

Answer: Fence adds security and privacy to your house. If your house doesn’t have a yard, then it might not be necessary. But if it does, do you feel like sacrificing your privacy?

Question: What’s the difference between a privacy fence and a normal fence?

Answer: Well, privacy fences, as it’s named, block the entire view of your compromise. Whereas normal fences are installed maintaining gaps. So your privacy is like staying behind a glass wall.

Conclusion

I hope now you know how much it costs to build a fence. Always check with your contractor about the clause. Try to be on the same page with them. 

That’s all you have to know about building a fence. If your curious mind still has some queries, feel free to state that in a comment.

Till then, all the best!