Skip to Content

How Much Does It Cost To Install 1000 Sq. Ft. Of Hardwood Floors

Hardwood is not only durable but also gives your home a luxurious vibe. Installing hardwood floors is really popular these days. But they are costlier than the regular flooring materials available in the market.

How much does it cost to install 1,000 square feet of hardwood floors?

Installing 1,000 sq. ft. of area with hardwood costs $9,400 – $42,600. That is if you use traditional wood material. The cost would be $9,400 – $31,600 for engineered hardwood. The total cost of hardwood flooring depends on a few factors. The hardwood material, installation & labor cost, finishing are the factors to look upon.

That was only the tip of the iceberg. If you wish to know more in detail read our piece till the end.

So, let’s begin!

Cost Calculator For Hardwood Floor (1,000 sq. ft.) 

Calculating the total cost for hardwood flooring can be a hassle. Calculating the material and installation cost isn’t enough. 

You’ve to thoroughly calculate everything to make a complete budget plan. Just like how you’d calculate the cost for building a tiny house beforehand.

To make it easier we’ve made a cost calculator for you. You can make the total cost calculation for installing hardwood flooring here. This calculator below shows the total cost for 1,000 sq. ft. area-

Cost FactorsTraditional HardwoodEngineered Hardwood
Removal Of existing Flooring$400-$600$400-$600
Material Cost$3,000-$22,000$4,000-$9,000
Installation & Labor Cost$4,000-$8,000$3,000-$10,000

Seems to be an amount bigger than you expected? The cost breakdown can clear out that confusion for you. We’ve explained the cost for each factor in detail for you. The calculation is also shown in each section.

Hardwood Floor Cost Breakdown

The hardwood flooring cost for 1,000 sq. ft. is $9,400 – $42,600. This is the pricing range for using traditional wood flooring. If you use engineered wood, the cost would be $9,400 – $31,600

As you can see, installing hardwood flooring is not a cheap project. It almost covers the cost of adding a half-bathroom.

That’s why before you go installing hardwood floors, make detailed cost planning. The section below can help you with that. 

We’ve included the total cost breakdown for installing hardwood flooring. We’ve also included the cost for a 1,000 sq. ft. area as well.

Removal Of Existing Flooring

Removing the existing flooring is the first step of the floor remodeling project. The goal of this job is to remove the old materials properly. Also, remove the adhesives and fasteners without making any damage to the floor.

The cost for old flooring removal is $0.20-$0.35 per sq. ft. And the disposal cost for old flooring is $0.20-$0.25 per sq. ft. if we calculate the cost for 1,000 sq ft.-

AspectCost For 1,000 sq. ft.
Old flooring removal$200-$350
Disposal of old flooring$200-$250

Hardwood Material Cost

When it comes to wood flooring, you have a vast range of options. There are many hardwood flooring types available in the market nowadays. 

The characteristics, design, and functionality are not the same. Based on the material quality and its functionality the price could be dramatic.

Choosing hardwood material for flooring should be done with caution. There are many factors to think about. The material’s quality, longevity, and durability come first. 

The climate you live in also matters greatly when choosing hardwood. Then comes the design of the flooring.

Before deciding on a particular material, make sure to talk with your contractor. Because they would have better knowledge about the quality of such products. Hardwood can be divided into two types. 

Let’s talk about both of them-

Traditional Hardwood

Traditional hardwoods are real solid wood that comes from trees. The woods are later given shape for flooring. Traditional hardwoods are better than any engineered hardwood. Because they are more durable and are of good quality. Also, there’s no hassle of insulating the flooring.

If you’re planning to use traditional hardwood you’d have a vast range of choices. Of course, that goes to the design of the wood as well. Because all traditional woods have their own color, shape, and patterns. They give a luxurious look to your house.

Here’s a list of the traditional hardwood flooring and their cost per sq. ft. We’ve included the pricing range for 1,000 sq. ft. as well-

Type Of HardwoodAverage Cost Per sq. ft.Cost Of 1,000 sq. ft.Pros & Cons
Pine$3-$6$3,000-6,000Easily dented,Has rustic knot patterns,Light beige to rich amber
Black Acacia $14-$17$14,000-$17,000Eco-conscious, Dark in color, Expensive
White Oak$8-$15$8,000-$15,000Water-resistant, Highly durable, Red visible grain
Red Oak$8-$13$8,000-$13,000Durable, Gives warm ambiance, Red highly visible grain
Cypress$6-$9$6,000-$9,000Termite resistant, Durable, Sustainable
Hickory$6-$13$6,000-$13,000Has many color variations,Dense, High traffic friendly
Bamboo$5-$11$5,000-$11,000Pale yellow to green, Hard and durable, Sustainable
Tigerwood$17-$20$17,000-$20,000Exotic, Visible black stripes,Durable
Birch$13-$16$13,000-$16,000Has aesthetic appeal, Yellow-reddish to brown, Durable
White Ash $9-$13$9,000-$13,000Durable, Visible knots, Soft tan to pale gray
Maple$6.50-$12$6,500-$12,000Resists dents, Creamy white to pale red,High-traffic friendly
Mahogany$8-$14$8,000-$14,000Durable, Reddish-brown, Elegant
Kempas$16-$20$16,000-$20,000Luxurious, Deep red-brown, Highly durable
Cabreuva $20-$22$20,000-$22,000Hard & durable, Fungus insect resistant, Sustainable
Brazilian Walnut $8-$14$8,000-$14,000Hard & durable, Expensive, Exotic
Teak $11-$17$11,000-$17,000Expensive, Elegant, Hard & durable

As we see, the pricing range for hardwood material is $3,000 – $22,000. That is for a 1,000 sq. ft. of area. 

Engineered Hardwood

Engineered hardwood looks just like any other regular wood. But its building mechanism is different. That is it doesn’t come straight from trees.

Instead, it’s a composition of thin layers made from wood, raisin, and polymer. Lastly, the upper layer is topped with real hardwood.

There are many types of engineered hardwoods available in the market. Most of them cost around $4-$9 per sq. ft. If you calculate for 1,000 sq. ft. the price is $4,000 – $9,000

They are comparatively cheaper than traditional hardwoods. But cheaper doesn’t mean a better choice.

Most engineered hardwoods are not as durable as traditional hardwoods. The quality of the wood lacks that of the real solid wood. 

Although you may find good engineered wood among many options. But they might cost a lot. Still, the cost might be less than some traditional woods out there.

If you wish to use engineered hardwood, consult with your contractor first. They can find you a good choice among all the other options.

Installation & Labor Cost

The installation & labor cost covers the contractor’s fees. For installing hardwood floors it’s best to hire professional contractors. 

Typically, the contractors charge for their labor by sq. ft. For installing solid hardwood the cost is $4 to $8 per sq. ft. For engineered hardwood, it’s $3 to $10 per sq. ft.

If you hire a carpenter, they might charge $60-$80 per hour. Installing a hardwood floor for a 1,000 sq. ft. area takes 1-3 days. But carpenters only cover the woodworks. 

That’s why hiring a contractor is a more economical choice. Here’s a table showing the installation & labor cost for 1,000 sq. ft. area-

Hardwood TypeInstallation & Labor Cost
Traditional/Solid Hardwood$4,000-$8,000
Engineered Hardwood$3,000-$10,000

Note that, the cost of installing engineered wood is higher than the traditional woods. Because the installation of engineered wood is more complex. Because of this, the total expense increases.

Finishing the Floor

Hardwood floors require finishing after the installation. It is to protect the wood from moisture, scrape, stain, and scrapes. 

There are many types of finishing available for hardwood flooring. Some hardwoods come with the manufacturer’s finishing. They are most likely to be of aluminum or resin.

Hardwoods that don’t contain a manufacturer’s finishing, require a finishing treatment after the installation. 

The finishing is required every 2-3 years to keep the hardwood well. Hardwoods that have aluminum or resin finishing are most likely to last 10 years.

So, you wouldn’t have to worry about the cost of refinishing hardwood floors anytime sooner. It can last even longer without refinishing.

Here are some popular hardwood refinishing costs:

Types Of FinishingCost Per sq. ft.Cost For 1,000 sq. ft.
Polyurethane $2-$3$2,000-$3,000
Oil Wood$3-$5$3,000-$5,000
Unfinished Hardwood$2-$6$2,000-$6,000
Factory $3-$10$3,000-$10,000
Surface $5-$10$5,000-$10,000
Penetrating $10-$12$10,000-$12,000

The estimated range for hardwood finishing is $2,000 – $12,000.

You can laminate the floor for further protection. That is if the finishing isn’t up to your satisfaction. The cost of laminating 1,000 sq. ft. is around $6,000 – $14,000

But it’s totally not needed if your finishing is strong enough. Laminate your floor only if it needs higher protection.

How To Save Money while Installing Hardwood Floors?

Installing hardwood flooring is indeed a costly project. But if you want to you can reduce some costs from your budget plan. 

We’ve provided some expert tips on cost saving for this project. Hopefully, they’ll be of use to you. 

Removing the Existing Flooring Yourself

The cost for removing the existing flooring is $0.20-$0.35 per sq. ft. If we talk about a 1,000 sq. ft. area the cost is $200-$350. The bigger the floor is, the higher the cost will be. 

This job is usually done by the contractor you hire. But if you want to reduce some costs you can do it yourself.

Removing the existing floor is not as hard as it seems. But do keep in mind that it must be done carefully. If the base is harmed, you might have to face the hassle of repairing it. That’s why you’d need a little to moderate knowledge about floor removing.

Self-protection is also important as you’ll be dealing with various tools and chemicals. Make sure to wear protective clothing for hands, eyes, and knees. Keep a dust protective mask as well as it can be dusty.

You can try disposing of the old finishing as well. But remember that flooring materials can be flammable. There are various chemicals present in those disposals. 

If you’re not sure what you’re dealing with then don’t do it. The same goes for removing existing flooring.

Moving Furniture & Appliances 

Moving furniture and appliances falls under the labor cost. That is if furniture and appliances already exist there. 

Moving furniture and appliances costs about $20-$150 per room. The cost per appliance is $15-$30. This amount adds to the labor cost and increases the total cost.

Rather than paying for it, move the appliances yourself. You may need one or two more helping hands. But it’s still better than paying extra money.

Lower the Material Cost

Choose from lower-priced hardwood materials. It’s best if you go for traditional hardwoods. You can find much good quality material from the mid-range price list. 

For example, maple, bamboo, and oak are less pricey yet have good quality. They even look beautiful when the flooring gets completed.

Rather than choosing a pricey material, they can save you a lot of bucks.

Choose Less Costly Finishing

Choosing less costly finishing doesn’t always mean that it won’t last long. Even with cheaper finishing materials like Polyurethane you can stay at ease. 

You can also use a store-bought abrasion kit. Abrasion kits include all the major chemicals needed for finishing hardwood floors.

If you’re not sure which abrasion to use, we recommend you use these-

Product 1
Product 2 

Using a Polyurethane solution is another cost-friendly option for hardwood finishing. Polyurethane coats are long-lasting. It will take several years before the flooring would require refinishing. The price for Polyurethane is $2-$3 which is also very cheap. 

The simplest and cheapest option for hardwood finishing is using a revitalizer gloss. To apply this you won’t even need any special equipment or rare materials. More importantly, to apply this you won’t require professional help. 

But it won’t last as long as other finishes do. You have to reapply it once every 2-3 months.

Have A DIY Mentality

Having a DIY tendency is very important for any renovation project. Rather than being dependent on someone, try to do the work by yourself. It enhances your skill and saves money as well.

The whole installation process of the hardwood flooring can be done by yourself too. But you’d need some prior knowledge for that. 

Although, doing the whole project without any professional help can be risky. But if you have enough knowledge at least you can complete some parts yourself.

Hopefully, our discussion was informative for you. Now, you can make a detailed budget plan for your hardwood flooring.


Question: How long does it take to install a hardwood floor?

Answer: Hardwood flooring requires acclimation before installation. That means the hardwood material must stay in your house for about a week. During this period the wood adjusts to your house’s climate. Doing this prevents it from contraction or expansion. Once the acclimation gets completed the flooring installation takes 2-3 days.

Question: How to take care of the hardwood floor?

Answer: Sweep or mop the surface of the floor once a day. Don’t let any water spill remain on the floor for long. For cleaning, avoid using solutions that might leave behind any residue. And don’t go overboard with using water for cleaning. Applying too much water to the hardwood may damage the floor.

Question: How to hire contractors for installing hardwood floors?

Answer: Firstly, look among the local contractors and compare their charge rate. Ask them a lot of questions regarding the job. Give them the details about your planning. Also, try to know in detail how they plan on implementing it. Compare the charge rate with at least three contractors to avoid overpaying.


That’s all about how much does it cost to install 1,000 square feet of hardwood floors? Hopefully, you’ve got all your answers by now. 

Make a detailed budget plan for your hardwood flooring now. Install your hardwood flooring in the fall to get the best out of it.

See you soon in another home renovation project! Until next time!