Do you have a huge tree in your yard that you’re unsure how to deal with? And you have no idea how you’ll get rid of it on your own. Don’t be concerned. This is something that most of us had to deal with.
How to cut down a tree with a chainsaw near a house?
First, clean the space surrounding the tree. After that, you can chop down the lower and upper branches. Then, using a chainsaw, cut down the trunk of your tree. You may either cut the stump down to the ground level or leave it alone. Finally, you should chop down the fallen tree into little pieces for cleaning.
Still don’t think you can do it all by yourself? Well, we bet you can if you read our full article.
So what are you waiting for? Let’s start!
Tools Need To Cut Down A Tree
Taking on projects requires a chain of steps. The first step is always gathering the equipment. Before you start with this project it’s also important to know the precautions when cutting down a tree.
Some of them you’ll find among your household items. But, you’ll have to go to your local hardware shop to get some of them.
So, let’s find out what they are!
- Extension ladder or tripod ladder
- Reciprocating saw
- Safety goggles
Got them all? Now let’s start cutting down the tree that’s been bothering you so much.
Cut Down A Tree with Chainsaw- 6 Simple Steps
Cutting down a tree all by yourself seems like a hard job, doesn’t it? Well, any job can be made easier if you turn it into some small steps. From refinishing a pine floor to cutting down a tree, you should try to break it down into some small steps.
We have six simple steps to cutting down your tree with a chainsaw just for you.
Step 1: Clear The Area Around The Tree
Move cars, lawn decorations, and any non-stationary outbuildings or tools out of the way before you start cutting. This will protect everything around from being damaged by falling branches or trunk parts.
Ensure that all pets and little children are kept safely inside. This will remove the chance of them injuring themselves inadvertently.
If the tree you’re removing is accompanied by shrubs or other plants, try trimming them back so you can navigate the workplace more easily.
Step 2: Start Cutting The Lower Branches down First
Begin by chopping off the tree’s lowest branches. If you have basic woodworking knowledge you would know how to handle a chainsaw.
Lower-level branches are often bigger and heavier than higher-level branches. As a result, the ideal tool for the job is a chainsaw.
Make an incision by sawing upwards from the underside of the stem when chopping huge branches. It should be approximately a quarter of the way through the stem at this point.
Then saw downhill from the tip of the branch after the first cut.
Make sure the undercut is 6–12 inches longer than the trunk. The branch will drop smoothly without fracturing or breaking if you make two incisions this way.
If you have extremely large branches you can use a rope to lower them down.
Step 3: Cut Down The Higher Branches
To tie your extension ladder to the tree you’re chopping, put up your tripod ladder or use a rope. Then chop off the higher branches with your reciprocating saw.
You might face a hard time choosing which reciprocating saw is good for you. Well you can have a look at the list below:
I hope this will help you with your work.
Instead of climbing the ladder with the saw in your hand, fasten a rope to the saw’s grip. Then you can carry it up with you. Bring the saw up to yourself after you’ve reached the top of the ladder.
After that, cut the bigger branches with your chainsaw and the branches will fall to the ground.
Falling branches if they are big can harm your house. So, you can tie a rope around to make sure it doesn’t land on your house.
Step 4: Cutting Down The Trunk
You’ll just have the trunk remaining in your backyard now that the tree has been de-limbed.
First, cut a right-angle notch in the tree trunk in the area you want it to drop using the chainsaw. The notch should be shallow enough to go 1/4–1/3 of the way through the width of the tree.
Make sure the area is cleared when you do perform this step. This is the most dangerous part of the project.
Step 5: Cut The Stump at Ground Level
This is an optional step. It’s important to know that removing the stump can be really difficult. In the process, you’ll also need to know the best ways to remove tree roots.
So, if the stump is not bothering you too much then you can leave it as it is. You can use a stump killer to stop further resprout of the tree.
Otherwise, you’ll have to cut it off using a chainsaw.
Step 6: De-limb The Tree Into Small Sizes
You are almost done cutting down your tree. However, think of this last step as a cleanup step. Moving this huge tree can be really difficult.
So, using a chainsaw, cut the tree into small pieces so it becomes easier to move.
Now you’re done with cutting down a tree near your house. However, this is no easy job.
It’s better to be safe than to regret later.
Question: When a tree is taken down, do the roots keep growing?
Answer: The roots of a tree can no longer develop once it has been chopped down. since the leaves are required to offer the nourishment that allows the roots to develop.
Question: Which trees are the most damaging to foundations?
Answer: Oak, ash, and poplar trees are the trees that cause the most damage to building foundations. The tree roots of these trees are the quickest, toughest, and most intrusive of all trees cultivated in community homes.
Question: What is the cost of removing a tree?
Answer: For tree removal services, you may consider paying between $150 and $2,000. The typical cost of removing a tree, on the other hand, is in the $700 – $750 region.
By now you should know how to cut down a tree with a chainsaw near a house.
But this is not a simple task, it is best to entrust it to specialists if you have no prior expertise with such tasks.
Wishing you the best of luck with your endeavor!