Drywalls acting up is a serious annoyance. It’s one of those troubles that requires a lot of patience and time. But, at the end of every mess, it’s very worth it for personal safety and aesthetics.
How to even out drywall seams?
To even out drywall seams start off by dusting off the dirt residue from it. Then, you will need to smooth the wall out by applying drywall mud. It helps to smoothen out the drywall. You would also have to sand it smooth, prime, and repaint the entire surface.
If you are still confused about all this, then I absolutely understand.
Let’s go read the article below for more intimate knowledge!
3 Reasons Why Does Drywall Seam Get Uneven!
Drywalls are the base of any house insulation. Them acting up and ruining the home aesthetics is unacceptable. But still, this drywall issue seems to never resolve.
There could be a million reasons as to why drywall seam got uneven. But we will talk about the major 3 reasons. And they are:
Reason 1: Leaks in Plumbing
You might have been wondering about fixing wet dry walls all this time. Most of the drywall issues occur due to moisture.
This moisture tends to create blisters on the smooth surface. So, if you have your drywalls exposed to water sources, they will get uneven.
Also, in some houses, water lines are directly behind the drywall seams. This might cause those pipelines to leak and ruin the walls.
Reason 2: Uneven Coating
Drywalls are easy to install and work with. But still, sometimes we mess it up. Now, the topcoat on drywalls is what makes it resilient to foreign objects.
Now, if this coating is not smooth, the drywall would end up being patchy. You’d see bulges through the seam in such cases.
Reason 3: Inconsistency in Taping
Now we know drywalls are connected with tapes. But, the consistency of the tapes depends on how tight or loose they are.
Always remember that taping two drywalls isn’t like taping an air mattress. So, too tight tapes are just as bad as too loose ones.
Both create a gap through the drywall seam. Which leaves air bubbles within the drywall making it patchy and uneven.
Evening out Drywall Seams in 4 Easy Steps
Now, we know some of the main reasons for drywall seam being uneven. Now, before you panic, there are easy solutions to this. Just ride along for more:
But first, let’s collect the necessary tools to work on this project. I understand if the idea of new tools sounds stressful and expensive to you.
But honestly, you probably own more than half of these tools already. Any good handyman would. Now, check out the tools shall we:
It is an essential ingredient to smooth out the unevenness. They have a gooey texture that can be spread along to smooth out the drywall.
A prime ingredient that goes after the mud. Their job is to make the wall smooth and ready for painting. Like seriously, get the best quality primers for this. Here’s some of my favorites:
Your house is your safe zone. So, make sure to use the best quality products for it.
This might not be mandatory but useful. If your drywall has water damage or broken bulges, use this to smoothen the surface.
These will be all the tools required to fix a drywall. Now, let’s go check how to put these tools in action and save a drywall. The steps are given below:
Step 1: Identifying the Problematic Area
After identifying the infected area, inspect it. If it’s a normal air bubble that causes unevenness, the procedure is simple.
But if it’s water damage, you have to work a bit more. Water damage on dry walls leaves a residual mess. So, evening it out requires more attention.
Step 2: Sanding the Affected Area
Sand the portion that has a bulge or water damage. In other cases, you can avoid this part.
Take the sandpaper and rub across the affected area until even. Don’t use unnecessary pressure on the wall or you will damage the tape underneath.
Step 3: Mudding the Uneven Area
This is the time to use the ultimate smoothing product. Take some drywall mud and evenly spread it through the wall.
Make sure to double coat if the first one wasn’t effective. Let it dry for a day or two. Make sure to keep proper ventilation in the room to dry the drywall mud faster.
Step 4: Priming Off the Drywall
Lastly, prime off the drywall after mud dries off. This process ensures a smooth finishing and long-lasting effect.
Prime the walls with a few coats to achieve the final result. Do not overdo this process . or else you will end up with a patchy finishing.
Though it looks intimidating, once you finish up the good work, everything would be worth it.
Though I hope you never have to face it. But if you do, you’d know what to do now. Other than that, this whole process requires intense patience and hard work.
But at the end of the day, it would be worth it once the job is done properly.
Question: Is it possible to plaster over drywall?
Answer: It is in fact possible. For that, you’d have to make sure not to use vinyl plasters. For, they tend to be too tough to sit over drywall. Use something more suitable. Otherwise, it would be difficult to paint.
Question: Can we paint over drywall?
Answer: Yes, you can but not suggested. Drywall lacks the smoothness and friction to glide paint on. So, paint tends to be patchy and lighter in shade than general. Use a top coat before applying paint in such a situation.
Question: Can you mud a whole wall?
Answer: Most definitely. Even though the mudding process repairs unevenness of the surface. But if you want to smooth out your entire wall, then go ahead. Remember to be consistent otherwise, there would be patchy marks.
If you have come this far I hope your queries are cleared. And you are no longer stressed about how to even out drywall seams.
If you are still struggling with it, make sure to contact a professional in this matter. I am glad you’ve tried though.
Until then, hope you have a wonderful evening.