Drywalls and showers always have a gap.
And those of us who are lazy can stick something in between and call it a day.
But over a period of time, it can cause molding in the drywall.
How to finish drywall around a shower perfectly?
To finish the drywall around the shower, firstly apply caulk around it. Secondly, cut the shower beads according to your size and attach them. Attach it with staples to secure the placement. Apply drywall compound with a scraper and let it dry. Add finishing touches by sanding the wall.
Well, that was a quick look at the process, now let’s learn about the details. Below we have detailed steps for you to follow.
How to Do the Finishing Touches in the Shower
If you are playing to leave the gap between, it’s not a good idea. Water can trap inside the drywall and cause molding in your shower. Also, insects can start making your shower, their home. So it’s better to cover it up.
There are many ways you can cover this area. But it’s better to do something which will last. And using drywall compound is best for this scenario. Drywall compound is also known as white cement.
But you cannot just lay the cement on and hope for the best. If you do so, the compound will not be able to grip on something. What you need to do is attach something where the cement will grip on.
For your help, I have divided the whole process into 6 steps. It is a good idea that you learn about the whole process. Otherwise, you can miss out on some important information. So let’s get started.
Step 1: Apply Caulk Around the Shower
Before you apply drywall compound to the gap, you need to place something in between. Otherwise, the compound cannot grip the gap.
Now you might think you can just fill the full gap with the compound. But this causes you to use a lot more compounds. So, let’s not be wasteful and do this the most efficient way possible.
Now you need to attach the shower bead in between the drywall and the shower. But what is a shower bead? A shower bead is a piece of plastic sheet-like thing that has many holes.
If you are looking forward to by shower beads for this project, then check the links below:
These shower beads come in many sizes. But the most common sizes are 2 ½ inches and 5 ½ inches. You can cut these shower beads according to the size you need.
Now, the shower bead needs to stick on to something. That is why I applied some caulk to the shower wall. Be careful not to use a lot of caulk in the shower walls. If you do, it can ouze out of the shower beads.
Step 2: Place the Shower Bead Down
Now that you have applied caulk, you place the shower bead on. The shower bead comes in a standard size. So you need to cut down on the shower bead according to your sizes.
Now, the shower bead has a support leg and a tear-away strip. The support leg is for thinner shower flanges. If your shower has a thicker flange, you need to cut the support leg according to your size.
Also, you have to discard the tear-away strip on the shower beads. This helps you to get a clean finish when you apply the compound. You can also use shower beads if you want to fix drywall seam that’s uneven. A shower bead works best in many scenarios.
Now, put the shower bead up against the wall and push it down. You can use a sliding motion on the form up to down on the wall. This will spread the caulk evenly throughout the shower wall.
Do remember to push onto the shower bead while you are doing a sliding motion. If you don’t push down onto the shower bead, the caulk won’t stick to it. And it will fall down when you apply the staplers. We will be doing this in the next step.
Step 3: Staple the Shower Bead to the Drywall
So, the shower bead is placed on the drywall, you can put some staples in. The staples will secure the shower bead further onto the drywall.
If you don’t put staplers in, the shower bead can move. Let alone caulk isn’t strong enough to hold the shower beads on the wall.
You can use drywall screws or nails other than staplers. But those are more permanent solutions to stick something on the drywall. Since we are going to apply drywall compound anyway, you don’t need that level of strength. Staplers are fine in this case.
You need to staple every 6 to 8 inches on the shower bead. That is why the manufacturer has given holes onto the shower bead. Well, there are other reasons as well. Such as, the compound will go through the shower bead and stick to the wall.
If you have an overlapping shower bead, make sure to staple it there. Use multiple stapes when the beads are overlapping one another. Staples are really to place in. you just put in the stapler and some force to push it inside.
Step 4: Start Applying Drywall Compound over the Shower Bead
So, all things are in place now. Now it is time to apply the white cement. It seems really easy, but is it actually? Even though the task may seem easy, we suggest you follow our guidelines. So that you can apply drywall compound like a pro.
Firstly, mix the compound powder with water. The package instruction on the drywall compound should be followed in this case. Also, mix a bit more extra than you think you need. Because it’s easy to work with more compounds than keep on scraping it.
Also, handling a bit of extra compound will give you some wiggle room. Working with a minimal amount of the compound can make you scrape too much. And that can eventually leave marks on the wall or you can make a mess.
Start from the shower side of the wall or which even is a bit elevated. Apply a bit extra amount than you think you need. Cause you can always scrape away the extra and reuse it. Also, don’t overdo it, cause we are going to apply for the second time anyway.
In this way apply drywall compound all over the wall. Afterward, let it dry for at least 12 hours. Although we prefer you leave it for 24 hours so that it can dry completely.
Step 5: Apply the Drywall Compound Again
Applying a second coat is always a good idea. The second coat can cover any mistake you have made in the first run.
Also, the second brush-up can make the look completely different. Usually in the first coat scraping sticks can leave marks. Which will make you both look bad.
let the compound sit on any groves and corners. Make sure you make long strokes of the compound. This way you can catch any excess amount and remove it.
Like the first coat, leave it for another 12 hours to dry. You can keep it for 24 hours, but the second coat isn’t that deep. So it doesn’t require that much time.
Step 6: Sand And Fillup Up any Groves on the Dry Compound
Now, only the finishing touches remain. This is important as the second layer or coat of compound as well. Sanding will improve the looks of your drywall coating. Usually, there are surfaces after applying the compound which is uneven.
Sanding can make the surface smooth as butter. Also, light can reflect better if the surface is smooth. We recommend doing the filling while applying the second layer. But you can do it now as well.
Although, there are ways you can complete drywall without even sanding it. But it can require a next-level skill set. But for this amount of drywall job, sanding can work just well.
And this is how you can complete the finishes on the drywall around your shower.
What are the advantages of using the shower beads?
Using the shower beads can let you minimize the amount of compound you use. Also, the hole design lets the compound pass to the wall and makes a perfect seal. You also don’t need any tape and screws which can let mold grow in the wall.
Can I use a regular office stapler to staple the shower beads?
You can use a regular office stapler to staple the shower beads in. But office stapes are really weak in comparison to hardware staplers. Those stapes are longer and thicker. Which can hold the shower beads much stronger.
How to mix the drywall compound?
The best proportion of dry to wet is 2:1. That means use 2 parts of powder with 1 part of water. Mix the compound with something or your hands. Although we still recommend you follow the packaging instructions.
That was everything you needed to know about how to finish drywall around a shower.
Don’t leave your mixed drywall compound out in the air for too long. Because it can end up hardening in the mixing pot.
Good luck with your shower project!