How To Fit A 60 Inch Tub In A 60 Inch Space [Easy Guide]

We may get commissions for purchases made through links in this post.

60″ is an ideal size for bathtubs in bathrooms. But the issue arises when you have limited space. You might have exactly 60″ tub space for a tub in your bathroom. 

Don’t know how to fit a bathtub in a small area? We can solve this problem.

How to fit a 60 inch tub in a 60 inch space?

You have to remove the tiles from your drywall to make some space. Removing the tiles will give you some extra inches. That’ll be plenty to put in the tub. After fitting the tub, connect it with the waterlines. Then, retile the tub area again. 

This was a short briefing of the entire fitting process. You need to know the full instructions to do it by yourself.

Let’s explore the next part for the details!

Is it Really Possible to Fit a 60″ Bathtub In a 60″ Space?

Practically it might sound impossible to fit a 60″ tub in a 60″ space. Sounds weird but the installation is possible. 

First of all, 60″ tubs are not exactly 60″. They measure the tubs from one outer rim to another. A 60″ tub is meant to fit in a 60″. They are roughly 60″ (slightly more than 59″).

But you need just a little more inches to install the tub. For that, you need to remove the tiles from your drywall. After installing the bathtub, you can redo your walls. 

That’s the only possible way you can fit your 60″ tub in 60″ space.

The process of installing a tub takes a very long time. It’s better if you build a temporary shower for the time being.

Fitting A 60″ Tub In A 60″ Space: 5 Step Guide

Fitting a tub in the bathroom is a lengthy process. The task is not very difficult, only time-consuming. You can spontaneously do everything even if you lack past experience.

Once you’re done, your bathroom will look brand new.

We’ve prepared a 5-step guide to help you through the tub fitting process. Follow the instructions carefully for a successful tub installation.

Needed Tools

We must gather some tools prior to the work. Here’s the list of the necessary tools for tub fitting-

  • Flathead scraper
  • Hammer
  • Chisel
  • Electric grout scraper

These tools are common in every household, they’ll be easy to get. Let’s go through the steps now-

Step 1 of 5: Scrape Out the Grout

First, you’ve to get rid of the grout joining the tiles. Use an electric grout scraper to do this job.

We made a list of good-quality electric grout scrapers so you can find them easily.

Product 1
Product 2

Using an electric grout scraper will save you time. 

Scraping the grout will make the tiles loose. It’ll be easy to remove the tiles after that.

Step 2 of 5: Break the Tiles

Once you’ve scraped the grout, take your hammer and chisel. Break the tiles using the hammer. Just knock on the tiles with the hammer. You don’t have to put too much force but make sure to use the hammer carefully.

Remove the broken tiles with the chisel. Use a scraper to scrape out the tile glue. You’ll see the drywall exposed with water pipelines. Now clean the broken tiles to have plenty of workspace.

Step 3 of 5: Install the Bathtub

Now it’s time to fit the 60″ bathtub in the space. Turn off all the water lines before installing the tub. Take another person’s help to lift the bathtub and put it in the space. 

After fitting it in the small space, you need to check the space. See if the water pipelines are visible. 

Connect the water supply line and the drain pipe with the tub. Attach the faucets and shower. Wait 24 hours before turning on the waterline of your tub

Check if the water lines are working properly. If you have a leaky shower, fix it before retiling the area.

Step 4 of 5: Retile the Tub Area

Now put tiles on the wall and retile the space again. First, apply a thin coat of mortar to the wall. Then put tiles on the mortar while it’s still wet. 

Now, use a grout mixture to seal the joints of the tiles. You might also use silicone sealant rather than using grout. Silicon sealant does not absorb water so, it’s better to use this one in bathroom areas.

You’ve got to wait for 2-5 days for the retiled walls to dry. Also, the adhesives used in retiling take 48 hours to completely set and dry. Don’t worry if the retiling and drying take a long time, it’s normal.

Step 5 of 5: Check the Bathtub

When the walls are completely dry, check the tub. Check the water connection and drainage system first. 

Remember to observe the retiled walls as well. The walls will be dry if there’s no water leaking from the pipes inside the wall. If you see the tiles are wet, you have to seek professional help from a plumber to fix it.

That’s the way of fitting the 60″ tub in 60″ space. Hopefully, now you’ll find it easy to install the bathtub.

FAQs

Question: What’s the total cost to retile a 60″ space?

Answer: Tiling per square foot space by a professional can cost you $12. You’ll need to spend somewhere around  $800-$2000 to retile the tub space.

Question: Can we use caulk to seal the joints of the tiles?

Answer: No, caulk is not an ideal choice to seal the tiles. It is good for applying on wooden things. 

Question: What kind of tiles are good for bathroom walls?

Answer: If you want long-lasting bathroom walls use porcelain tiles. They are cheaper than marble tiles also, and very durable.

Final Words

We’ve explained everything about fitting a 60 inch tub in a 60 inch space. Remember this kind of work needs a long time to get finished. Don’t rush when you install your bathtub.

Hope you’ll have a wonderful day ahead. See you next time!

Scott Kelly