Skip to Content

How to Fix a Spray Bottle Trigger [Problems + Solutions]

Perfume bottles, glass cleaners may be found around your home. They are all contained in spray bottles.

When a spray bottle trigger fails, it’s critical to know how to repair it.

How to fix a spray bottle trigger?

Start with dissembling the bottle. Then clean the nozzle. Make sure the tube is straight and can reach the liquid inside. Place the spring so that it can push the piston back up. These should get your trigger to work again.  

Anyway, this is just a brief explanation. Still, have confusions? Let’s go to the main article and learn in detail to clear all your confusion!

What Is the Anatomy Of A Spray Bottle?

Knowing how the spray bottle works is the first step towards fixing it. Different bottles have different systems. 

Like from the ones of glass cleaners. They are different from spray paints that are used on concrete. But the basics are usually the same. Its malfunction diagnosis is aided by understanding its operating process.

It is made up of many components, including the following:

  • Nozzle
  • The pump, the spring, and the piston
  • Trigger
  • Tube
  • The container 

The piston, which is connected to a spring, is at the core of the apparatus. When you squeeze the trigger, the insides are rapidly ejected. 

When you pull the trigger back to its previous position, the spring action creates a vacuum in the tube. The liquid rises to the piston chamber as a result of this.

These are the best spray bottles I have handpicked for you:

Product 1
Product 2

These should last long enough to get your work done. 

Also, because the nozzle is generally adjustable, you can control how fine (mist-like) the liquid comes out of the nozzle.

Spray Bottles Triggers: Common Issues and Possible Solutions

The trigger, pump, or other sprayer elements often fail when you need them the most. That may be in the midst of a task, for example.

Having such useful knowledge might save you a significant amount of time or money. So, before you toss it out, there are a few methods you may try if the spray bottle isn’t working.

Problem 1: Nozzle Blockage

If you don’t look closely at the sprayer, a clog in the nozzle may be the only thing keeping it from operating smoothly. 

As a result, grip the sprayer nozzle’s small hole towards you. 


Here’s how to find out. loosen the nozzle by turning it slightly counterclockwise. It should work if it was really tight. Otherwise, completely disassemble the tip and rinse it in warm running water.

If the spray bottle contains greasy fluid, cleaning it with water is very important.

But, if you haven’t used the sprayer in a long time and it has gathered filth, It’s possible that you’ll need to wash it in alcohol.  After that, use a little pin to poke the hole and give it a try.

Problem 2: Curled Tube

If the bottle is nearly empty and the tubing is coiled. This might be a sign that the pump isn’t working properly. 

To take out the fluid, the tube must dip into the liquid. It might not be the case if it’s a spray foam bottle to use under the shower pan.


Looking for other old spray bottles and replacing the tube is one technique to mend a sprayer with a twisted tube. Take the lid off and cut the tube.

Leave some space for the protruding part if it’s too short.

Then seek a tube that will fit over the protruding end and reach down the sprayer. Attach a weight, such as a nut, to the free end of the tube to prevent it from bending in the future. 

Problem 3: Spray Bottle That Doesn’t Retract

In typical operating conditions, you just have to pull the trigger once before it self-retracts. A helical wire aids the automated retraction motion.

If the trigger does not drawback, the fault is most likely with the spring. As a result, depending on the type you’re using.


To get the pump to operate again, you’ll need to get to the spring. Replace it and reassemble the whole device if it was misaligned.

But, if the bottle’s construction prevents you from reaching the springing mechanism, toss the pump.

Problem 4: A Perfume Sprayer with a Clogged Nozzle

Downward pressure is required for certain bottles, notably perfume spray bottles. But, if you use too much power or if the perfume bottle falls and lands on the nozzle, it may clog.


Follow the instructions below to fix this:

Step 1: Remove the top clamp. As a result, grab a pair of tweezers and clamp it to the cap. 

Gently rotate the pliers in a counterclockwise direction while keeping your grip.

Step 2: Disconnect the pipe. Hold the spray cap so that the tube faces upwards once you have it in your hands. To disconnect the pipe from the spigot, carefully pull it out.

Step 3: Make the metallic ball visible. You should be able to get to the metal ball now that the duct has been removed.

Step 4: Adjust the ball’s position. Grab a needle and pry the jammed metal ball loose. It’s an important stage in the process of repairing a spray bottle. Replace the tube in its proper location after the ball has been freed.

Be careful if it’s a foam spray. Washing them off hands can be tricky.

Use the needle to probe into the little orifice of the perfume bottle before corking it, simply to make sure it’s not blocked.

Step 5: Reassemble and test the system

It should retract and release the smell mist on its own.

Problem 5: Insufficient Fluid being Ejected from the Sprayer

When you pull the trigger, you may see that the sprayer only sprays a little quantity of fluid. This is most likely due to a lack of oil or clocking in certain internal components.

But, this should not be a tough problem to fix. Here’s how to do it: 


Half-fill a second bottle container with vegetable oil. Then, using the vegetable oil, dip the little pipe linked to the pump.

Pull the trigger and the oil will be sprayed. Allow 10 minutes for the container to settle before rinsing.

Minor Issues with Potential Solutions

Certain sprayer canisters include sealed nozzles to avoid the contents from being accidentally sprayed. 

So, before you dismiss your spray bottle as defective, make sure it has a small aperture.

It’s important to note, though, that you may have to concede defeat and change the sprayer on sometimes.


Question: How to identify a good spray bottle

Answer: A spray bottle’s most crucial feature is its long-lasting nozzle. You’ll need a sturdy nozzle that won’t leak. A leak-free, adjustable nozzle that can switch between a stream spray and a mist is ideal, as is a setting that locks the nozzle when not in use.

Question: How to spray clean for the first time?

Answer: When you initially use a spray bottle, you’ll have to pull the trigger a few times to get any cleaning fluid to spray.

Question: Is it possible to reuse spray bottles?

Answer: We advise against reusing spray bottles that are missing their dust tops. Look for a spare cap if available.


Now you know how to fix a spray bottle trigger. Before we end I have a bonus tip for you. Wipe off the nozzle every time after use. This should keep any clogging away.

With that being said, we have reached the end of our article. I hope you don’t have any confusion after reading this. 

Till next time, best of luck!