You might be pretty depressed with your magazine laying in your drawer. And you don’t know how to frame them and give them new life.
How to frame a magazine?
Framing a magazine can be easy work for you. All you need to measure the size of your magazine. And then you need to buy a frame or shadow box for your magazine. Then you need to align your magazine to the frame. You will need tape and foam boards. Also, cut your foam boards to fit your frame.
You might be still blurry about that matter. Don’t worry, I have prepared the whole article to clear your head out. What are you waiting for? Jump on the details.
Want to Frame A Magazine – 4 Easy Steps How!
Magazine covers itself as a piece of fine art. It can summarize the whole story behind it. That’s why it’s a popular collectible piece.
You might just want to frame your cool magazine collection that’s laying in your drawer. And present them as fine pieces of art.
You may think framing a magazine is a hassle. But it’s the opposite, You can say framing a magazine is more like framing a picture. But because of some things, it can get a little complicated.
The thickness of the magazine can be an issue. Also, magazine size and layout can create complexity. All you need is step-by-step suggestions to follow. Also, you may need some tools.
Tools That You Will Need
Don’t worry you don’t need to send a stack of dollar bills to buy these tools. These tools can be really cheap. And most of them can be laying in your storehouse.
Or you can just visit your local store and buy them off. Here’s what you may need:
- Shadowbox for the Magazin
- Foam board
- Heavy-duty blade
- Tracking pen
- Measuring tape
- Double-sided tape
With these tools and some of your DIY patience, you can easily frame your magazine. It will take no time to frame it. But on the other hand, it will save you a lot of money. Here’s what you need to do.
Here are some steps you need to follow to frame your magazine:
Step 1: Measuring the Magazine
Firstly you need to measure the size of the magazine. Carefully measure the height and width and depth of the magazine.
Approximately the most recent magazines are a little bigger. So you will need a big shadow box or frame for the magazine.
Approximately the common size of the magazine can be 8.5” L and 5.5” W. Or it can be 11 inches long and 5.5 inches wide. And it can vary from magazine to magazine.
Step 2: Buying a Frame
You need to go to your nearby store first. Then buy a frame or shadow box for the magazines. You should buy an exactly fitted size shadow box for the magazine.
If you can’t find the exact box, a slight big-sized shadow box will do the trick. Literally buying a shadow box can cut some of your cost.
You need to fill the box with a magazine perfectly, But don’t compare it with filling the wall opening.
Step 3: Cutting the Foam Board
You will need a foam box to support the magazine. If you attached the magazine without the foam board, then it might sleep under. So you need a foam board to support the magazine and to stay put at the fitting spot.
Then the first thing you need to do is place the shadow box above the foam board. And mark the space with a tracking pen. Then also place the magazine on top of the board and mark it.
Then all you need to do is grab a heavy-duty blade and cut through the marked line. It’s more like cutting a PVC. And you will get a frame-size foam board.
Here are some good-quality heavy-duty blades for you, check them out if you’re confused-
|REXBETI 2-Pack Utility Knife||Ultra-sharp blade with good service|
|KATA 2-Pack Utility Knife||Ergonomic design with a comfortable grip|
Step 4: Aligning the Magazine
Then you need to align your magazine to the shadow box. Firstly you need to open up the shadow box from behind. Then put your magazine in the middle.
On top of the magazine, you need to add a foam box to support the magazine. For more stability, you can use double-sided tape. It will give your magazine more stability
But you need to check if the front glass of the frame is clean. It would display the magazine. If it’s not clean then you might need to clean the glass.
And there you go, your magazine frame is ready to hang on your wall. Find a perfect place to fit the frame. And you will be rocking the look of the wall.
Question: Is it possible to use a floating frame to hold a magazine?
Answer: Transform your favorite comics and periodicals into stunning pieces of art with these easy-to-follow instructions. Use this float frame to display periodicals, comic books, artwork, and more. Create an eye-catching atmosphere in your home.
Question: How do you hang a magazine on a wall?
Answer: Apply paint-safe glue to the wall to secure the photos or poster board. Some adhesives can remove paint from the wall. But there are also numerous safe adhesives to pick from. Poster-specific double-sided detachable tape is available.
Question: What is the average size of a magazine?
Answer: In terms of printing magazines, the most popular sizes for 8.5 by 11 and 5.5 by 8.5 inches are used. Saddle-stitched magazines, as well as perfect bound magazines, can be printed in either portrait or landscape mode. Another frequent digest size is that of the 5.5 by 8.25-inch variety.
That’s all from me. Thanks for reading the whole article. Hope now you are clear about how to frame a magazine.
By flowing these easy steps you can easily make a frame for your magazine yourself. And you can give new life to your wall also to your magazine collection.
Best of luck!