Skip to Content

How To Glue Plastic To Wood [4 Efficient Methods]

The struggle surrounding the attachment of plastic materials to wood is frustrating.

Though there are many methods of it, gluing it up sounds more reasonable and safe.

How to glue plastic to wood?

Start by selecting a proper glue for your wood as every glue acts differently. Then, sand the surface of the plastic material for an even finish. Dampen the wooden surface and apply a few drops of glue to it. Evenly apply the same amount on the plastic as well. Now, firmly attach them and leave them overnight or as advised.

In case you need a descriptive guideline on this topic, I got you covered as well. Keep reading for more details!

Can We Glue Plastic To Wood?

Firstly, most definitely we can glue plastic to wood. Using glue to attach plastic and wood is a centuries-old method. It is not as hard as a skimming coat over wallpaper glue though.

But, not all glues are applicable to use over plastics and woods. It is because some of them tend to damage both of these elements or simply aren’t applicable for either.

But, with the proper glue, you can truly glue plastic and wood without any hassle.

How To Glue Plastic To Wood: 4 Methods

Now, the process of attaching plastic and wood with glue is slightly different for different glues. But the process is kinda the same in all of them. 

Let’s check out, shall we:

Method 1: Superglue

This is very efficient when it comes to quick attachments. Though it’s very dangerous to work with still with proper guidelines, you’ll be able to work it through.

Superglue is a very strong adhesive. So, hold the plastic tightly in its palace on the wood for it to set up properly.

With superglue, you must work quickly. Before gluing the pieces together, give them a test fit. They should be compact.

To acquire a suitable surface area of contact, shape, or smooth the parts. The bond’s efficiency can be harmed by a surface that is too smooth or too rough.

Careful while using this though, as it’s pretty hard to get off once it’s up. Or else you’ll have to look for how to get glue down wooden floors if you drop it here and there.

Method 2: Glue Gun

This one is a bit messy but effective. Here, you will be working with hot glue so be careful with your actions.

Now, start by repairing your components ahead of time. And then, double-check if they will fit where you need them to. 

For large parts, apply the glue in dots or lines. Working quickly is essential because the adhesive hardens quickly as it cools. 

This glue is more effective if you are gluing pennies to wood than plastic to wood. But worth a try though.

Method 3: Contact Cement

This one is mostly used in the industrial sectors. As it has many layers of precautions and actions, it’s the hardest to work with.

Firstly, always test-fit the pieces before applying adhesive. Because repositioning would be difficult once the cement has been put to both pieces.

Now, place dowels or sticks over the surface of larger flat pieces once the cement has cured to the touch. 

Place the plastic on top of the dowels to prevent the cemented surfaces from connecting. After placing the dowels, pull them out. 

And then, let the plastic fall softly into the cemented area below. Apply pressure with a rubber mallet or roller to finish the bonding.

Method 4: Epoxy 

First, mix the two components which are resin and hardener into equal parts. Careful with this, as this glue cures slower than other adhesives. 

This means you won’t get much time to reposition.

Next, by applying pressure to the joint, strengthen it. Usually, it isn’t always necessary. Lastly, allow it to dry overnight. 

Even though there are ways to dry epoxy resin faster, I would suggest being patient. Don’t touch or move the objects during this process for the best result.

Here are some of my favorite brands for this particular glue:

Product 1
Product 2

Hope they work out for you as much as they work out for me. This is a reliable and less embassy way to glue plastic and wood.

Final Words

Overall, I think the best option is epoxy. Epoxy might sound a bit intimidating but it’s very effective. 

It’s actually the most effective for the plastic and wood attachment.

Be careful while using it though, it might get difficult if you are not following the rules properly. 

Other than that, if anything glues without damaging your materials, that would be epoxy.


Do liquid nails work on plastic?

Answer: Most definitely they do.  But precisely a specific type of nail would work on plastic the best. Small silicone adhesive nails work best on plastic.

Can I use wood glue on plastic?

Answer: Actually, you can’t use wood glue on plastic. Wood glue is specifically made to attach woods with each other and won’t be effective on other elements.

Can we use cement to attach plastic with wood?

Answer: Yes, we can. But we have to be careful about its usage and amount as they tend to take more time to dry.


Now you have read this far, I’m assuming you have gained basic knowledge on how to glue plastic to wood.

But, if you are still struggling, I would suggest contacting a professional on this. Nevertheless, good work for trying.

Until next time, good luck!