Skip to Content

How to Glue Plexiglass to Wood [9 Easy Steps]

This article is for informational purposes. Always seek the advice of qualified professionals.

I know the frustration when you want to make fancy wood with plexiglass. But clueless about the processes of attaching plexiglass to wood. You don’t need any special tools or skills. All you need is your full attention.

How to glue plexiglass to wood?

You can glue plexiglass to the wood. Smooth both wood surfaces to place the plexiglass. Ensure the perfect aligned lining. Contact cement or adhesive meant for bonding plastics may adhere to the wood. Before using the glue, make sure the exterior surfaces are free of dust and grime.

This is just a sneak peek of what I got here. To get more insights follow my lead till the end. 

Why wait any longer? Let’s dive in!

Essential Appliances to Glue Plexiglass to Wood

This polymer is significantly stronger than glass and can be molded owing to its flexibility. It will continue to fall off if not done correctly.

You’ll need a marker pen, drill bits, and a drilling machine to perform the activity. Also, you need Araldite Rapid Strong Epoxy Adhesive, Plexiglass sheet, and wooden object.

Detailed Processes to Glue Plexiglass to Wood

To glue plexiglass to wood ideally, you need to follow the proper steps attentively. 

Step 1: Correct Measurements And Size

You’ll need a straightedge and a few precision tools to cut the Plexiglass. Then, attach it to the wood first. You’ll also need a flat and smooth piece of wood for that.

Along your straightedge, measure and record the cutting line. 

Using little force, cut away from yourself along the line. Don’t hurry through the cut; it will become harsh and jagged. 

Before using glue on your cut Plexiglass, use medium grain sandpaper to smooth out the edges. Sharp points and advantages that may otherwise harm your Plexiglass. 

To prevent any residue from going onto the Plexiglas, keep your knife clean by cleaning it with a soft cloth or paper towel.

Step 2: Clean the Wood Surface

The surfaces must be clean for the adhesive to function when gluing plexiglass to wood. Clean the exteriors using a scouring pad. It will remove any dirt, grease, or oils. Now, let them dry.

This is crucial if you’re dealing with plexiglass or wood. As it won’t attach to filthy surfaces.

Use acetone or isopropanol for cleaning. A spray adhesive is more effective when you need to bond huge areas. But, you can also use powdered tile adhesive.

Step 3: Ensure the Lining

Before you begin, double-check that each layer is aligned correctly. Apply hard pressure to the whole surface of your plexiglass to wood.

If you need to add more layers, pay careful attention to how much glue and cement you use. Give enough time to dry out the surface.

Remove any debris or dirt that has already gotten onto the exterior. Clean it with a warm,  moist cloth.

Step 4: Use Cement Or Adhesive

Check to see whether you have enough cement or glue before starting. The amount of material required for tasks like this varies depending on the glue. 

Spread a substantial quantity of contact cement uniformly over one of the plexiglass’s exteriors. If you get any on the other facade, you’ll have a mess when you join them together.

Allow five minutes for the glue to set before putting the Plexiglas. It may take some time. Follow the coverage and drying time recommendations if you’re dealing with cement. 

And if you are using Araldite Rapid Strong Epoxy Adhesive, make sure to be extra careful. It must follow the proper drying time.

Now, don’t get confused about which glue to choose. Just hav look at the glue recommendation below-

Product 1
Product 2

Hope this will help you to resolve your confusion.

Step 5: Secure the Plexiglass to the Wood

Before putting your plexiglass together, double-check that both exteriors are aligned appropriately. Carefully place along with the whole plexiglass cover.

Apply pressure to the whole top Plexiglas cover to adhere securely to the bottom layer. 

To achieve a good bond, do this after the cured adhesives. You must wait for a few hours or longer.

Step 6: Neaten Excess Adhesive

Remove all of the extra cement or glue. Wipe off both layers with a paper towel to ensure there are no residual fragments. 

This will keep your job tidy and professional-looking.

Step 7: Give Enough Time to Adjust

Most contact cement must be allowed to set for at least 24 hours before use. So, be sure to leave enough time between each step to allow for adequate drying.

Avoid moving the glue before drying out. Because the layers may separate, resulting in the loss of all you’ve worked so hard for.

Step 8: Attach Screws

Attach two or three screws directly into the wooden frame. Following the natural curvature will keep the plexiglass in place. 

Then, use a grinder.And remove any extra material from the screw heads.

This is an efficient approach for attaching your plexiglass to the wooden frame.And that will be simple and handy for you.

Step 9: Finish the Final Look

If you want a strong, long-lasting, and stable adhesive bond, anneal it. This will warm the glass and allow it to cool gradually. 

The items might anneal before or after bonding. Bake the finished product at 158°F to strengthen the binding (70 degrees Celsius).

Follow all the steps accordingly. And you will be done with your work in no time!

FAQs

Question: Can I use Gorilla Glue for Plexiglass?

Answer: They won’t attach to wood because they soften or melt the acrylic and evaporate the solvents. But it will not adhere to cast acrylic.

Question: What is the ideal adhesive glue plexiglass to wood?

Answer: Epoxy resin adhesives employ two components that react when thoroughly mixed. When blended, the resin and hardener form a solid connection. For bonding Plexiglass to wood, epoxy resin adhesives are used because of their colorability.

Question: Can I use acrylic glue on plexiglass?

Answer: Acrylic hot glue needs a high-temperature glue gun with a 12-inch thick nozzle; we suggest the Infinity Bond Scout HT and Ranger PRO. 

Bottom Line

We’ll be parting our ways with this. I hope this solves all your dilemmas about how to glue plexiglass to wood.

Gluing plexiglass to wood isn’t that tricky if you follow all the mentioned steps accordingly. Ensure you’re doing everything correctly and you’re good to go.

Best of luck with your craftwork!