You may wish to decorate the sides of your house to celebrate different festivals or seasons. Heavy goods will easily pull down and ruin your siding, costing you a fortune in repairs.
How to hang heavy things on vinyl siding?
Worry not, we have listed a few ways to hang heavy things on vinyl siding. For this, a siding hook or wiring hook can be used. There’s another way of drilling but that’s the last resort to give in. Lastly, suction cups and adhesive hooks can be good alternatives to such big works mentioned above.
With basic tools, you can implement hanging solutions and decorate exteriors safely.
Hoping you’ll stick around!
How To Hang Heavy Things On Vinyl Siding?
Drilling a hole in vinyl siding and inserting a screw or nail. It is the easiest and quickest method. But wait! I suggest that you try alternative approaches first before reverting to drilling.
The five methods I shall illustrate are as follows:
- Wire hooks
- Siding hooks
- Hooks with Suction Cup
- Adhesive Hooks
Now that most homeowners have vinyl sides to their homes. It is a fairly common concern in most houses.
But every issue has a solution. Then what is the procedure to put heavy things on vinyl siding? Here they are-
Use of Siding Hooks on Vinyl Siding
Well as the name implies. These small yet useful hooks are specifically made for the vinyl sides.
These hooks are the most secure and simple method to hang items from vinyl siding.
Weights of up to 12 pounds may be carried by good siding hooks. I like stainless steel hooks since they do not color my vinyl siding.
Stainless steel hooks are somewhat more expensive than aluminum hooks. Vinyl siding can also be put on top of aluminum siding. but this is not recommended. Because it often causes rust buildup and corrosion.
Steps to follow
Installing siding hooks ensure that any item you hang stays safe and protected. Follow these easy and simple instructions to install siding hooks on vinyl siding:
- Step 1: Look for the horizontal space between the siding pieces.
- Step 2: Carefully lift the upper siding piece and put the hook between the gap faced out.
- Step 3: Push the hook firmly into the gap until it snaps.
- Step 4: Hang any object weighing no more than 12 pounds or in accordance with the manufacturer’s instructions.
Wire Hooking Vinyl Siding
This is the method I choose for hanging items weighing less than 12 pounds. A wire hook is simple and will not harm your vinyl.
Steps to install wire hook
Here’s how you can install a wire hook into a vinyl siding-
- Step 1: Find the location where you want to hang the item by removing the planks.
- Step 2:Remove the gap between the planks using a zip tool. Here you will have to enter.
- Step 3:You can now easily find the house wrapping and find the screw and place the wire hook.
- Step 4: Reassemble the Siding by sliding the hanging wire.
Adhesive Hooks On Vinyl Siding
Adhesive hooks may be used to hang items outside your home. Outdoor adhesive hooks are specifically designed to stick to concrete, glass, or siding. These hooks typically have a weight restriction of roughly 3 pounds.
You can buy your set of adhesive hooks from these below-recommended products:
These are the strongest available on the market. And you may apply it without worry.
Adhesive hooks stick nicely to the flat siding. This may not be a good option if your vinyl siding is textured like Dutch Lap siding. It has horizontal rows. Dutch lap siding is ideal for all-weather situations also.Hence don’t worry about the weather.
Use of Suction Cup Hooks
Suction-cup hooks are a good substitute for hanging items on vinyl siding. They are available in many sizes. The bigger the suction cup, the stronger the suction. Also, the greater the amount of weight it can retain. Some suction cups can withstand weights of up to 20 pounds.
Methods for using suction cups
Following these steps will assist ensure that suction cups stick well to vinyl siding or other surfaces to which they are attached:
- Method 1: To clean dust, use soap and water to clean the surface.
- Method 2: The surface should be dried.
- Method 3: Dry the area after cleaning it with rubbing alcohol.
- Method 4: Place the suction cup against the siding. Wetting it first improves stickiness.
- Method 5: Before hanging anything from a suction cup, wait at least 24 hours.
Drill Through the Siding
Definitely, drilling is not a good idea. But during festivals, you may like to drill and stick heavy speakers to your vinyl siding. But, mounting them on the wall will require drilling holes. Vinyl siding can be damaged by incorrect drilling techniques. Remember drilling vinyl is best done in warm weather since warm vinyl is less prone to breaking.
Steps for Drilling
Follow these steps to safely drill through the vinyl siding and hang heavy goods.
- Step 1: Mark A Hole
- Step 2: Choose the Suitable Drill Bit
- Step 3: Drill a Hole in the siding accurately.
- Step 4: Put the screws in the siding
Question: What is the maximum weight that can be hung on vinyl siding?
Answer: Vinyl siding, on the other hand, can endure up to 50 pounds per square foot of pressure. The bulk of the time, though, up to 12 pounds.
Question: Is it safe to drill through vinyl siding?
Answer: Absolutely, you may drill into vinyl siding as long as you use a power drill or hand-held drill with the appropriate speed and torque.
Question: How Do You Attach a Ledger Board to a Vinyl-Sided House?
Answer: Using a measuring tape, determine the rim level and trace an outline of the ledger board on the siding. Drill trial holes for metal studs into the house frame through the ledger board.
There you have, five alternative ways to hang heavy objects from your vinyl siding.
Hope this helps with your query about how to hang heavy things on vinyl siding.
Contact a professional, if you can’t get a hold of it.