Skip to Content

How To Hang Things On A Tile? [4 Effective & Easy Methods]

Have an empty tile wall where you want to put a painting on? Well then, you’ve come to the right place. Because here we have curated the perfect segment on this.

How to hang things on tiles?

The most obvious way of hanging things on tiles is by drilling them onto the wall. If you want a less permanent option you can opt for adhesive strips or mounting hangers. Using liquid nails to glue things on your tiles is also an excellent option. 

In case you’re still confused regarding which method to follow, it’s fine! We’ve provided in-depth guides regarding each of the above-mentioned methods. 

So, let’s jump right in! 

Hanging Things on Tiles: 4 Different Ways!

In some cases, hanging things on wall tiles becomes an absolute necessity. However, depending on the placement, the method of hanging things on tiles can vary. 

Now in case, your wall tiles are thicker than the accent you need to fix that. Otherwise, you might run into problems. 

So, now that we’ve gotten that out into the open, let’s check out the ways. Without any further ado, dive into the details. 

Method 1 of 4: Drilling Into The Tiles

Drilling is one of the most convenient ways of hanging things on tiles. It’s often the first method that comes into your mind when you think of a method. 

This might be the perfect method if you have no problem drilling a hole in your tile. However, there are a few considerations you need to take into account. As if you don’t drill carefully, your tiles might crack. So you need to perform the job with caution. 

Besides caution, it’s important for you to choose the appropriate drill bits such as M7 or the M42. In this way, you can have a stronger grip. So now, to properly install your masonry bits, you need some additional tools. 

Tools Needed              

Here is the list of tools you need for the entire process:           

  • Permanent marker
  • Masonry bits 
  • Drill
  • Anchors
  • Scrap Wood or Dremel 
  • Hammer 
  • Screws
  • Screwdriver 

Now gather up your tools and let’s get to work!


First, mark the place where you will be drilling using a permanent marker. Set the drill at the lowest speed and drill a small hole in the place. You need masonry bits to drill a hole into the tile. 

After that, place a Dremel or scrape wood and drill a hole through it carefully. Use a cone-shaped grinding bit on your Dremel to minimize risks. This way you can drill a small bit at first and then use a drill to widen the hole. 

Keep the scrap wood or Dremel in place to prevent the tile from cracking. After that, continue to drill through the tiles into the drywall. 

Now that you’ve drilled through the tile, place the anchor to attach to the tiles. Gently tap the anchor into the hole using a hammer. Then using screws latch the anchor to the tile. Tighten the screw using a screwdriver. There you go, your tile is ready to hang things on! 

Method 2 of 2:  Using Adhesive Strips

If you want to hang lightweight items like a small painting you can use adhesive strips. Adhesive stripes can hold a weight of up to16 pounds. Plus these are super easy to install, remove and you don’t need much experience as well. 

This method is also great if you don’t want to commit to a certain place. Plus, if you don’t like the placement you can just take it off. Your tiles won’t be damaged. 

Adhesive tapes can come in various sizes. So depending on your item you can choose the appropriate size. These tapes are also double-sided. So it’s convenient when you want to paste something on the tile. 

Adhesive strips also tend to work better if the wall tiles are not beveled. Moreover, in case your tile is hazy, you can easily remove it using a tile cleaner.

To make it easy for you we’ve recommended some adhesive tapes down below:

Product 1
Product 2

Now, using this tape, you can easily install the painting you’ve been wanting to install.

Tools Needed

Here’s the list of tools you’ll need:

  • Permanent marker 
  • Double-ended adhesive tapes

Now gather your tools and let’s get to the process!


To hang your paintings you first have to mark the tile using the marker. After that, take out the adhesive tapes.

Open only one side of the tape and place it on the tile. After that, open the other side. Place your desired item on the tape. Then the work is done. As simple as that basically!

Method 3 of 3: Using Liquid Nails

In case you want to mount heavy items on your tile wall, use liquid nails. These liquid nails tend to sustain heavy items which are about 880 pounds easily. As a result, you can hang your heavier paintings and decorations using this glue. 

However, one downside of this method is that glue will stick to the tiles. So cleaning glue from tile might be an additional hassle. But there’s nothing some heavy-duty cleaning spray can’t take off. It is also a permanent method of hanging things on tiles. 

Tools Needed

Now, coming on to the list of things you’re going to need:

  • Liquid nails or Silicone caulk
  • Caulk gun
  • Masking tapes
  • Permanent marker

Well, we now know what we need, so let’s get to the installation process.


First, mark the place where your item will be placed. Use the caulk gun to squeeze a big dollop of the liquid nails on the dot.

After that gently place your item on the glue. Hold the item for a few minutes on the tile. This will make sure that the item will stick to the tile strongly. 

And that’s it! Your work here is done! 

Method 4 of 4: Using Mounting Hangers

There are some ready-to- use mounting hangers present in the market. These are super convenient and easy to use. You can use it when you’re in a rush. 

As they are ready-made you don’t need a lot of additional things. These hangers come with all the appropriate things necessary. So if you’re new to all of these, mounting hangers are perfect for you. 

Tools Needed

Have a look at this and gather the tools you need:

  • Mounting Hangers
  • Permanent marker

Now that we have everything we need, let’s install these!


Mark the place you want to put the hanger using a permanent marker. After that peel off the sticker from the backside of the mounting hanger. 

Then simply just place the hanger on the tiles. Now, your tiles are ready to hang things on!

That’s all we have on how you can hang things in tiles!


Question: How can I prevent my tiles from breaking by using the drilling method? 

Answer: To prevent your tiles from breaking, drill the tiles in a very slow manner. Also, use the drill in the lowest setting throughout the entire process. 

Question: Are adhesive strips long-lasting? 

Answer: No, adhesive strips are not long-lasting. These are mainly used for short-term commitments. But for long-term options, you might need to consider a stronger form.

Question: Are liquid nails damaging to your tiles? 

Answer: Yes, liquid nails have the potential to damage your wall. However, most of the glue residue can be cleaned by a thorough detergent wash. So, it’s safe to use.


So that’s it about how to hang things on the tiles segment. We hope these methods work well for you. If you’re facing any trouble, call a professional immediately.

Until then, stay happy and safe! Catch you next time!