How to Lay Carpet Tiles on Stairs: The Complete Guide

We may get commissions for purchases made through links in this post.

Carpet tiles are great for adding a bit of modern touch to your home. It’s one of the easiest DIY projects. You don’t even need any special skills to do it. The entire process wouldn’t take more than 2 to 3 hours.

So, how to lay carpet tiles on stairs?

Laying carpet tiles on stairs can be done with 4 simple steps. First, you need to calculate how many tiles you need, then take the necessary preparation and cut out a template. Finally, install the carpet tiles on your stairs.

Well, this was just the tip of the iceberg. There’s a lot more to the process. That’s why we made a 4-step step-by-step guide for you. We also discussed the type of carpet tiles and why you should use them.

Without further ado, let’s start- 

Types of Carpet Tiles

Carpet tiles have a lot of varieties depending on thickness, adhesive, color, and patterns. All of the varieties are great for installing anywhere in your home. In some cases, carpet tiles are better than regular carpets.

Depending on where you want to install and how you want to install, there are 2 types of carpet tiles-

  1. Subfloor Adhesive

This variety of carpet tiles are easy to install on the subfloor. Similar to wall-to-wall carpets, you can use these as a total floor covering. 

People mostly use these stairs. But you can install these anywhere you like. There are different versions of it depending on the thickness. You may want to buy a thicker carpet if your house has a lot of foot traffic. 

  1. Tile to Tile Connection

This type of carpet tile is perfect for covering any kind of flooring such as hardwood or tile. You won’t worry about permanent stains on your flooring with these things.

These are a great alternative to throw rugs. They don’t need to adhere to the floor beneath it. They just connect to each other. 

So, you can adjust the size to your liking. You can even move around the entire set and take it apart whenever you like. 

Similar to subfloor adhesive carpet tiles, tile to tile connection carpet tiles also have a lot of varieties depending on the thickness and wear rating. 

How to Lay Carpet Tiles on Stairs?

Carpet tiles are not cheap. While you need to spend some money buying them, you can save a lot by installing them yourself. So, here are the steps-

Step 1: Calculate How Many Tiles You Need

When you go to the store, don’t buy the tiles right away. First, measure the length and width of the tiles. Then, measure the length and width of your staircases. 

Now, divide your step length by the length of the tile and make it round depending on the next number. Finally, divide the width of the stair by the width of the tile and round off the number. You'll know how many tiles you need by multiplying the two numbers.     

However, you should always buy a few extra tiles in case any of them gets damaged or stained in the future. This way you won’t have to go store to store for an exact match.

Step 2: Take Preparation

Start by removing the old carpet on the stairs. It’s important that you remove the previous adhesive tapes as they won’t let the new carpet tiles to be installed evenly. Most importantly, you won’t be able to put in any new adhesive tapes. 

Now, unbox your newly bought carpet tiles and let them sit on the floor for at least 20 to 24 hours. This will ensure that they’re adjusted to the room temperature and ready to be installed.

Step 3: Cut Out a Template

Making a template for each side of the stairs is the easiest way to install tiles. This way the tiles will fit perfectly and you won’t have any extra edges.

Place a big sheet of paper on one side of the step. Then, use a utility knife to carefully cut the sheet of paper according to the size of your step. Repeat the process again for the other side of the step. 

When cutting the sheet of paper, make sure that you leave no extra edge on it. Cutting them perfectly is necessary for fitting the tiles evenly.

Now, place as many tiles as you can on a cutting board and put the template on one of them. Cut the carpet tiles according to your template. Continue doing it until you have enough tiles to cover all the steps.

Step 4: Install the Carpet Tiles

Now that you’ve made a template and cut your carpet tiles according to it, it’s time to see if they check out. 

Place all the carpet tiles on the steps to see if they look good. If not, you can always change the pattern. Most importantly, you should see if they fit properly. 

After that, you can start the installation process. First, take off the cover of adhesive strips. Then, start placing the tiles on the stair one by one. 

Ensure that adhesive is perfectly connected to the tiles. Loose carpet tiles can come off at any time, making it dangerous for everyone.

If you see that any of the tiles have extra edges sticking out, you can cut those out with a utility knife.

Why Should You Use Carpet Tiles?

Carpet tiles are known for their versatility and custom designs. Here are a few other reasons why you should use these-

Easy and Quick Installation

Carpet tiles are quite easy to install. You don’t even need a professional to do it. Moving around and taking these apart is a breeze. So, if you want to replace your heavy carpet then this should be your first choice.

A lot of Variety

There are various types of carpet tiles. You can make your custom-designed carpet tiles if you want. Simply choose your favorite colors and patterns and you’ll be good to go. 

Quite Durable

Carpet tiles are quite durable as they’re mainly made for commercial use. Once installed perfectly, they’ll last for years. Even if one or two carpet tiles get damaged or marker stains, you can always replace them in no time.

FAQs

Question: Can you put carpet tiles on stairs?
Answer: Carpet tiles look great on the stairs of a house. They’ll add a minimal and sophisticated touch to your home, making it look modern. You can find the perfect carpet tiles for you as they come in a lot of variety. 

Question: Are tiles cheaper than carpet?
Answer: Carpet tiles are not cheaper than traditional carpets. The price range starts from $5 and can go up to $80 or more depending on your customization. However, the versatility and design they offer make them worth the money.

Question: What do you put under carpet tiles?
Answer: It’s not necessary to put anything under carpet tiles. In fact, manufacturers advise you against it.

Wrap Up

Folks, that’s all we had in store about how to lay carpet tiles on stairs. We hope this guide helped you to install carpet tiles on your stairs.

A word of advice, always use a template to make sure that the carpet tiles fit properly.