Skip to Content

How to Make Concrete Floors Shine: 2 Effective Techniques!

This article is for informational purposes. Always seek the advice of qualified professionals.

We understand if you want to make your plain concrete floors shine. If you don’t know how to go about it then don’t worry. We know many ways to get the job done to make it shine like marble. 

How to make concrete floors shine?

Frequent vacuuming and periodic cleaning with a sponge and a light dishwashing liquid will assist the concrete floors to shine. Remove dust and grime from nooks with a water hose every several weeks. Before you begin the process, ensure the concrete can withstand the elevated flow of fluid.

We’ve only given you a preview until now. Read on to learn more about the process!

Techniques to Making a Concrete Floor Shine

We’ve gone over two methods for making concrete shine. This is almost similar to making concrete shine like glass.

Technique 1: Acrylic Wax

Whether it only requires a quick clean or extensive fixing and sealing. With the correct supplies, materials, and equipment, sanding cement pavement may be a pretty simple operation.

Necessary Tools

  • Mop
  • Soap
  • Scrub brush
  • Gloss concrete sealer
  • Paint trays
  • Paint roller
  • Acrylic wax
  • Sponge mop with wringer

Step 1: Clean the Concrete Well

Scrub the discolored tile slab. If required, eliminate obstinate debris with light detergent and a scrubbing brush. Wipe the floor with water to ensure that it is perfectly clean. Permit the flooring to completely dry prior to applying the sealant. 

A sealant should not be applied to a wet surface. Water can be trapped by the sealer, resulting in white spots of perspiration. Now that it’s all clean, you could potentially make concrete look like marble

Step 2: Apply the First Coat of the Sealer

Dump the sealant into the paint tray, then pack the roller on the sealer & apply it uniformly across the surface. Start in the rear to avoid stepping just on the damp sealer, and concentrate solely on a single tiny chunk of the ground at a time.


Extend the preceding layer by 2 inches whilst the sealant is still fresh to achieve a homogeneous coat. Allow the sealant to cure completely for at least 24 hours.

Step 3: Apply a Second Coat

Add a second layer of sealant, ensuring that every stroke overlaps. Permit the final coat to dry thoroughly before applying the acrylic wax.

Step 4: Clean the Sealed Floor

Brush and wash the ground as needed to produce a smooth edge. You need to do this so that the acrylic wax has something to adhere to. Allow time for the floor to dry.

Step 5: Apply Acrylic Wax

Immerse the sponge in the acrylic concrete slab polish after pouring it into a paint tray. Spread two to three thin applications of wax to the floor, wringing away any excess. This will give the wax an average of two hours to cure among layers. Prior to permitting foot activity on the floor, check the wax with your fingertip.

Technique 2: Hydrogen Peroxide and Baking Soda

Necessary Tools

  • Hydrogen peroxide
  • Baking Powder
  • Plastic Scraper
  • Soft-bristle Broom
  • Cotton Cloth
  • Wet Mop
  • Neutral-ph cleanser

If you don’t have a neutral-ph cleanser at home, we recommend you take a look at the following:

Product 1
Product 2

Steps

  1. Mix hydrogen peroxide and baking soda to make a paste and then let it sit overnight. The solution must loosen and soak all of the blemishes on the concrete floor. Discard the mixture with a plastic spatula the following morning. To remove dried latex paint on the concrete, you could use ammonia.
  1. After you’ve eliminated all of the blemishes from the floor, you may start cleaning it properly. Mop the floors with a gentle brush to remove any filth, trash, or hair.
  1. Once you’ve cleaned up all the trash on the ground, clean it down with a soft cloth. It will catch any stray hairs, airborne particles, or grime.
  1. Finally, use a neutral-ph cleanser to wipe the floor. Avoid saturating the floors, since this might result in stagnant water and mold. Alternatively, sweep with a wet mop and let it air dry.

Now that you’ve cleaned the concrete floor you might want to get to polishing it. Here are what you’ll need to get the job done:

  • Sander
  • Coarse Sandpaper
  • Fine Grit Sandpaper
  • Very Fine Grit Sandpaper
  • Floor Polish Solution

Steps

  1. Polish the floor using sandpaper and a strong grit. 
  1. Resume the grinding operation using a higher grit abrasive, followed by a very fine grit abrasive.
  1. When you’re done sanding, add a floor polish solution to the surface and let it dry.

What to Do and Not to Do When Cleaning Concrete?

When polishing concrete floors, keep the following crucial things in mind:

  1. Chlorine, ammonia, alkaline cleaners such as lemon juice or vinegar, and the like should be avoided. Use pool chlorine to clean concrete instead.
  1. Try avoiding using metal scrubbing brushes to avoid scratching the concrete’s appearance.
  1. Use a gentle plant with lukewarm water. That should be sufficient for routine deep cleaning.
  1. If your polished concrete flooring requires thorough cleaning to eliminate ground-in debris, use a commercial cleaner.

FAQs

Question: How would you maintain glossy concrete floors?

Answer: The first step in keeping shined floors is to proactively use a deep sealer or cosmetic protection to preserve the floor. To prevent grime off the ground. Topsoil is harsh and can degrade the brightness and luster of polished concrete.


Question: How can I create concrete to appear polished?

Answer: Honing and coating your concrete can be a cost-effective solution to achieve a polished concrete aesthetic while also providing you the option to change the high shine levels. If you really do not like the texture feature extraction finish, you can use a neutral concrete sealer instead.

Question: What effect does acid have on concrete?

Answer: Because vinegar dissolves Chloride, it will degrade your limestone, dolomite, concrete, and epoxy surfaces. It “cleans” the enamel, but it also dissolves holes into the polish, ultimately dampening it. Materials such as marble, travertine, concrete, and concrete terrazzo will be affected.

Conclusion

We’ve answered everything there’s to know on how to make concrete floors shine. We hope that the article met your expectations. 

It’s critical to realize that you’ll need to scrub your concrete floors before polishing them. Polishing can be done on just about any durable concrete floor, new or old.

Goodbye!