The 360-degree gateway which originated in China and Japan, is said to have contemplative effects. It is believed that traveling through it is like stepping through a doorway between two realities.
How to make a moon gate?
Place numerous layers of stones vertically to form the moon gate’s base. Keep them level and consequently with the earth. Now install the plywood arch on the stone row, with the curves at the bottom. To make the foundation of the semi-circle, build a few rows of stones around the wooden arch.
Let’s dive into the steps together to learn more. These will help you give a significant edge in terms of technique, effort, and time.
Step-by-Step Guideline For Making A Moon Gate
The whole process of creating a moon gate isn’t that much difficult. Learning the proper method will help you in working hassle-free. Also, it gives you the opportunity to build a beautiful and perfect moon gate.
We’ve created a step-by-step guideline for you to follow. Let’s get into the details of it.
Construct The Wooden Support
Before starting your work on the stone foundation and structure, you’ll need to make the wooden structure. These will help you in your build by giving structural support and measurements to make your moon gate perfect.
Step 1 of 4: Creating A Temporary Wooden Structure
Before starting the project, you must ensure to clear the wooded backyard. Now assemble the moon gate while constructing the temporary wooden structure to support the stones.
Cut two 1/2-inch plywood pieces to the length of a moon gate opening’s diameter. This will give your structure the necessary support while going through the building process. It will also ensure a safe and sturdy moon gate.
After constructing the wooden support, you’re ready for the next steps.
Step 2 of 4: Measuring The Opening Diameter
Cut a length of twine to the moon gate opening’s diameter plus an inch or two. Knot one end of the thread to a pencil. Then place it in the middle of one of the wood’s edges.
With the pencil, make a half-circle. By using a jigsaw, cut out the circular. You must need a good-quality jigsaw to cut it out correctly. Here are some affordable jigsaws available in the market:
To cut the second piece of plywood, use the previous cut piece as a pattern.
Step 3 of 4: Inserting Bendable Wood
Cut a piece of bendable wood to the same length as the half-circumference. Cut this board’s width to the depths of the moon gate entrance you choose. This measurement should be based on the breadth of your stones.
You have to be very cautious in choosing the right type of wood for bending. A plank of wood with less bending strength will not work for your project. Oak, elm, hickory, ash, mahogany are the best options for bendable wood.
Step 4 of 4: Gluing The Wood Pieces Together
Wrap the flexible wood around one of the half-circles of wood. Apply a drop of wood glue to the edge of the pieces. Hold them together until the glue sets.
To secure the pieces, hammer numerous nails along the edge. Repeat with the other half-circle of wood. The moon gate’s shape will be created using this semi-circular wooden arch.
Assemble The Stone Arch
Now that you’ve completed the work on your wooden structures, you’re ready to start the main work. Building these frames and supports is crucial for your stone structure to be perfect. Let’s get into the details then,
Step 1 of 5: Building The Foundation
Build the moon gate’s foundation by laying down numerous layers of stone horizontally. Make it as level as feasible with the earth.
By using a trowel, add a layer of glue between each stone. You can also remove wood floors that are glued using a trowel.
Build a base as high as you would like the moon gate’s entrance to be off the earth. Place either one-two layers of stone beneath ground level for a ground-level aperture.
Make the width at least as broad as the moon gate’s diameter to ensure proper support and make the width at least as broad as the moon gate’s diameter.
Step 2 of 5: Arranging The Wood Arch
Arrange the wood arch over the stone row, with the curves at the bottom. To stabilize the arch, use a mallet to wedge stones around the foundation. You’ll also need a trowel to apply mortar.
Determine whether the stone for the moon gate entrance will be laid horizontally or vertically. The stones will be wedged against the arch if they are placed horizontally. They will be straight in a curved all-around arch if they are placed horizontally.
Step 3 of 5: Mortar The Foundation Base
To make the foundation of the semi-circle, build a few layers of stone. It should be all around the wooden arch.
For further strength and support, keep placing stones to the edges of the base stones. Construct the rows all the way up the ladder of the plywood arch. Allow for the mortar to dry before removing the wooden arch.
Step 4 of 5: Insert The Wood Support
Invert the arch and make four legs out of wood to support it. While you finish the top, the legs will prevent the arch from collapsing on the final stonework.
Fix the pair of legs to every side of the gate. And make sure to check the height, and step over the finished moon gate entrance.
Cut a second post to the precise size of a circle. Then push it vertically into the opening. Check for a perfect circle with a level.
Step 5 of 5: Finishing Touches
Finish the top of an opening by laying more stones all-around on top of the frame. Fasten them with mortar. You can also make the concrete patio look like stone. This will add more beauty to your moon gate.
Finally, remove the frame after the mortar has dried according to the package specifications.
That’s all we have about this topic.
Question: What does a moon gate symbolize?
Answer: Moon gate has a spiritual meaning in Chinese culture. It is said that these beautiful structures resemble the portals between birth and renewal. The Moon gate in the garden represents the gates of heaven as well.
Question: Where did moon gates originate?
Answer: Moon gates are originally from ancient Chinese mythology. This structure represents the spiritual gateway of living and death. Throughout east Asia, moon gates are seen in different cultures as well. The Japanese have a similar philosophy.
Question: What is a Bermuda Moongate?
Answer: Bermuda moon gates are built using stones and sand. Even though these are simple in design and build, their impact is enormous. Because moon gates are originally found in east Asian culture.
That’s all we have to say on how to make a moon gate. Going through this article we hope that you have found the answer and proper instructions. Now you can build your own moon gate for your garden or any other project.
You won’t feel too much to handle on your own if you follow the steps accordingly.
Happy moon gate building!