Skip to Content

Milwaukee Multimeter vs Fluke: Which One to Prefer

The best multimeters are made by Milwaukee and Fluke. How will you choose? To be honest, it’s hard to choose between the two. 

Don’t worry, though! We are here to assist you in resolving the problem.

Between Milwaukee multimeter vs Fluke, which one is better? 

A Milwaukee multimeter is a voltage, current, & continuity measurement tool. On the other hand, a Fluke multimeter is a sort of digital multimeter used for electrical & electronic testing. Milwaukee is a better predictor than a Fluke. Milwaukee has a lot of features, whereas Fluke has a bit less.

Still, making a decision based on this information isn’t that simple. In-depth research is required in this case.

The article’s journey begins here.

Let’s get this battle started!

Milwaukee And Fluke: Quick Comparison

There are a variety of multimeter models to choose from. Today, we’re looking at the Milwaukee 2216-20 digital multimeter and the Fluke 115 digital multimeter.

You can test a small engine ignition coil with a multimeter.

When we looked at the Milwaukee and Fluke meters, we made a table that shows how they stack up against each other in a quick way. If you look at the table below, it will tell you all the differences at a glance!

Warranty5 years90 days
Item Weight1 pound1.21 pound
Thickness1 inch1.82 inches
CapabilitiesIt’s a piece of electrical measuring tool.Fluke multimeters are digital multimeters that are used to test electrical and electronic systems.
Easy to useThe Milwaukee multimeter is simple to use.Fluke multimeters are not as simple to use as Milwaukee multimeters.
AccuracyMilwaukee is more precise.Fluke is less precise than Milwaukee.
FeaturesA Milwaukee multimeter has a long list of features.There are fewer options on Fluke meters
DurabilityMilwaukee multimeters last longer than Fluke multimeters.Fluke multimeters have a shorter lifespan than Milwaukee multimeters.
SafetyA Milwaukee multimeter’s safety features are often superior.A Fluke multimeter’s safety features aren’t as good as Milwaukee’s.

This is a look at Milwaukee and Fluke going head-to-head.

It’s time to get down to the details

Milwaukee vs Fluke: Head-to-Head Battle

The prior fast comparison was, after all, simply a bird’s eye view. Let’s dive right into the meat of the matter. If you really want the best outcome, be sure you select the proper one.


In comparison to Fluke multimeters, Milwaukee multimeters have a longer warranty period. Because they are built to survive longer, they are more durable.

Milwaukee multimeters are backed by a five-year warranty. On the other hand, the Fluke multimeter comes with a limited 90-day warranty. which is far too short.

Item Weight

The lighter your multimeter, the easier it will be to use.

The Milwaukee multimeter weighs only one pound. Fluke multimeters, on the other hand, weigh 1.21 pounds. Milwaukee weighs less than Fluke. 

A weight measurement tool can be purchased from the following products:

Product 1
Product 2

They are the best in the business. You can test them out!


The Milwaukee Multimeter is a heavy-duty meter designed for professional domestic, commercial, and industrial use. 2216-20 is the ideal aspect of professional electricians, combining performance consumer demands with features that make the job easier. 

The meter is CAT III 600V rated and meets the UL safety criteria required by electrical users.

Use the Fluke when you need to remove spurious or ghost voltages, or whenever you need to do continuity, connection, or basic wiring checks. 

In addition to these measuring capabilities, resistance, frequency, and inductance measurement capabilities are also available.

Both multimeters can be used to check grounding.

Easy to Use

When compared to a Fluke multimeter, it is usually simpler to operate the Milwaukee multimeter. They feature simpler settings and are less prone to have buttons that are difficult to understand.


One of the most critical aspects of a multimeter is its accuracy. Fluke multimeters tend to be less accurate than Milwaukee multimeters in most cases. As a result, they have a higher degree of accuracy and are less prone to erroneous readings.


Milwaukee multimeters tend to be more reliable than Fluke multimeters, as a general rule. As a result, they can handle more rigorous conditions.


A Milwaukee multimeter’s safety features are usually superior to a Fluke multimeter. This is due to the fact that they are intended for usage in hazardous environments.

You should know how to operate a multimeter safely for your own safety.

Which Multimeter Should You Use

There are a lot of different types of multimeters, but the best one for professionals or people who need a more highly developed one is the Fluke. 

If you’re looking for the highest performance, durability, and safety, a Milwaukee multimeter is the ideal option.

When it comes to temperature measuring, Fluke meters have the upper hand. The best multimeter for you will be determined by your specific requirements and preferences.

You should read the directions and be careful when you use your multimeter, no matter which one you choose.

Always unplug the power while not in use, and never exceed the maximum voltage and current rating of your appliance. Both Milwaukee or Fluke multimeters can last for many years if they are cared for properly.

The importance of a multimeter cannot be overstated. It has a wide range of applications. A multimeter can be used to test the light fixture. As a result, you should choose your multimeter wisely.


Question: What features should my Fluke multimeter have?

Answer: The Fluke multimeter features you require to depend on your job. Professionals may require a multimeter with extra functions. A Milwaukee multimeter is great for beginners or those who need lots of functions.

Question: Is it worth the money to get a Fluke multimeter?

Answer: It’s true that Fluke meters are worth the money. Many of these meters offer an analog bar-graph readout that attempts to bridge the gap between an analog and a digital readout and is therefore superior to that of most low-cost DMMs.

Question: What is the reason behind the high cost of Fluke meters?

Answer: The fact that they work with a power supply and high voltage is the reason for their exorbitant cost. Fluke actually designs the boards and separation circuits properly if you’re dealing with huge voltages or drastically variable potentials.

Final Word

We hope you now understand the difference between Milwaukee multimeter vs Fluke

Compare the differences before deciding on the best multimeter for your needs. Accurate measurement is ensured with the right multimeter. Make your decision after giving it a lot of thought.

If you’re still unsure, consult a professional.

Until then, keep secure and have a good time!