Skip to Content

Figure Out How to Move a Floor Vent: Step-by-Step Procedures

This article is for informational purposes. Always seek the advice of qualified professionals.

Don’t we all always want to stay updated with our lifestyles? Especially with our abode. A home is a place by which you can get judged as a person. Anyways, if you probably want to move your old floor vent to a new place. Where it stays hidden but also stays effective. 

How to move a floor vent?

Well, there are a lot of ways to move a floor vent. Although, using the right tool for the right method is important. So relocating, cutting a new frame for the vent, and putting it in an effective way is the step that is to be followed here. 

A more in-depth discussion is ready for you…

Methods to Relocate a Floor Vent

There are numerous alternatives for re-routing the floor exhaust. There are mainly 3 ways of moving a floor vent:

One of those ways is installing a wooden box to take the air out. 

If you reside in a humid area, I advise you not to go ahead with it. A wooden box can form molds due to the moisture. You can also add an additional vent to existing ductwork.

You could make a channel out of HVAC rigid ducting. But there would be an additional turn, which would reduce airflow.

An alternative way is to move the vent to a different area on the floor. Relocating the floor vent entails the installation of supplementary ductwork to reach the new vent area.

It is still a time-consuming task. But a floor vent relocation can be completed with minimal resources and tools.

Materials Needed for Moving a Floor Vent

  1. Carpenter’s Square
  2. Pencil
  3. 90 ° ductwork, if you can’t reuse the present
  4. a panel register
  5. Roof nails
  6. Ziplock
  7. Duct tape with foil
  8. Drill in bits

Step by Step Procedure

Here are the steps to follow for moving a floor vent: 

Step 1 

  1. Floor vents usually are situated in between floor joints. It will be quicker for you if they are next to one other. Then you can simply move the vent forward. 
  2. This time, explore beneath the home for any excess wiring, cords, or other impediments. 
  3. Turn off the furnace’s electrical supply.

Step 2

  1. The old floor vent should be removed first from the floor.
  2. Gauge the widths of the bottom of the vent using a measuring tape to determine the diameter you’ll need to cut in the flooring for the new vent position.
  3. Make sure the new vent placement does not cross a floor beam.
  4. Make an outline of the cut on the floor using these dimensions and a ruler as a guide.
  5. Mark lines along to the sides of the floor register with the carpenter’s ruler. Move them towards the front. 

Step 3

  1. Dig a 3/8 hole in one of the outline’s corners with a hand drill.
  2. Insert a reciprocating saw blade into the hole and carve the floor along the shape.
  3. Penetrate the vent in the gap in such a way that it holds the vent on the floor.

Step 4

  1. Trim a horizontal line down the line at the previous outlet using tin fragments.
  2. Using a power screwdriver, detach the tip of the vent from the surface.
  3. Install the top piece of the pipe in its new place. Drive screws through holes in the bottom of the ground.

Step 5 

  1. Calculate the distance between duct pieces.
  2. Using tin fragments, cut a new duct segment into the same measurement.
  3. One at each end of the new segment, secure a duct collar. Make up the difference with it to connect the vent to its new spot.

Step 6

  1. Cut into the duct segments through the holes in the duct collars.
  2. To fasten the pieces, put galvanized screws into the holes.
  3. Use a zip tie to secure the adjustable ducting to the metal register case.
  4. Wrap a layer of tin foil duct tape over the zip tie. Exactly where the flex duct joins the register box. This is for extra grip and to prevent air gaps.

Step 7

It’s finally time to see the finished product. 

Turn on the electricity to the furnace. Check that the air flows properly via the ducts and vent. 

But adding a vent to the existing ducting would improve ventilation.

When the air is windy, vent flappers can generate an unpleasant noise.You might even want to dig into vent flapper noise solutions. 

But if moving floor vents of your house isn’t appropriate for moving like the mentioned way then you have:

Vent Deflectors to the Rescue!

You could be having issues with your HVAC system’s insufficient airflow. To use a vent deflector is just a quick technique to ensure that you are entirely satisfied with your HVAC system.

A vent deflector will enable you to redirect and change the course of their vent for more control. 

The tool will let you switch between heating and cooling. A vent deflector is an amazing start for a lot of instances, including:

In empty rooms: Using deflectors in the floor vents in empty rooms will make your house air quality better. You can bring the use of attic fans for ventilation

Beneath the furniture: Sometimes floor vents are useless if they are behind any furniture. That will be of no use then, right? 

Deflectors could be used for the better effectiveness of floor vents. It will deflect the airflow better.

Hot appliances or thermostats: These products already exert heat of their own.

If you place a floor vent above or around then your readings will come faulty. Thus increasing your worries. So deflector will decrease the chances of this misuse.

There are kinds of deflectors in the market. The best few floor vent deflectors could be-  

Product 1
Product 2

The advantages of vent deflectors are as follows:
consistent overall airflow

  1. Better quality oxygen 
  2. Improved quality
  3. Lower energy costs
  4. Increased comfort.

Because the HVAC system will cool and reheat more proficiently, you won’t be worried about inside temperatures falling.

FAQs

Question: Is it difficult to relocate a floor vent?

Answer: It’s not difficult to remove the HVAC vent; it only requires some more trimming and measurement.

Question: Is it better to have floor vents or roof vents?

Answer: Typically, ceiling-placed vents provide higher cooling capacity, whilst floor vents provide better heat conduction.

Question: Is it costly to relocate a floor vent?

Answer: The average national hardware cost to relocate an exhaust vent is approximately $80 per vent, with prices ranging from $70 to $85. The combined cost of labor and equipment per vent is $494, ranging from $449 to $539.

Endnote

So that’s all I have to say about how to move a floor vent. I hope I’ve cleared up the matter.

Here’s a word of caution for you. Wiring might be difficult to manage at times.
If necessary, contact a professional.

It’s now up upon you to consider giving it a go.

Farewell!