Skip to Content

Is It Possible to Install Multiple GFCI Outlets on One Circuit? [Answered]

Nowadays, everyone talks about GFCI outlets. They are required by many federal laws. People depend on them to prevent electric shock and fire. Some homeowners even have them installed by professionals. 

But some people prefer to replace existing outlets with GFCI itself. That’s when the concern regarding using multiple GFCI outlets arises. 

Can you install multiple gfci outlets on one circuit?

Yes, it’s safe to install more than one GFCI socket on a single circuit. The only way something goes wrong is if you fail to wire your circuit the right way. You must check the regulations of your residence. In some areas, there are strict rules for using GFCI technology. 

Well, you need to continue reading as I’ve got all the details in the article!

Get started right away!

Is It Possible To Install Multiple GFCI Outlets On One Circuit?

Yes, it is apparently okay to install multiple GFCI outlets on one circuit. You can attach a GFCI socket to each socket.

You can also connect multiple sockets to a single GFCI socket. 

Sockets provide the same protections for all connected sockets. Several GFCI outlets, like B in the diner or B in the restroom, may be required. You have numerous possibilities in this situation. You can save money by using a single GFCI. 

At this point, connect additional standard output to the “LOAD” output of the individual GFCIs. This provides the same protection as a residual current circuit breaker anywhere. 

The downside is that if the GFCI moves to this route, all outlets will lose power. This can be annoying. If multiple devices are powered by a single GFCI, they are more likely to be triggered.

At times, it would even make it harder to plug in.

You may wonder, is it okay to install multiple gfci outlets on a single circuit? Well, the answer is no. Because multiple gfci outlets will not actually cause any issue. The issue will arise if you fail to install it the right way.

So, I’d recommend you talk to an electrician before anything. An electrician can install these outlets properly without any hazard!

Which Method To Follow To Install Multiple GFCI Outlets? 

If you are determined enough that you can do it yourself, you may as well get started! But you must follow the appropriate steps for the installation steps.

In the maximum of the homes, outlets are linked in parallel or on the corresponding line. This lets each outlet get the power on its own. It’s possible that wiring outlets in series isn’t the greatest option. 

But this is only true when regular receptacles are involved. 

You have two alternatives with GFCI; either install a GFCI receptacle on every outlet or in series.

I have discussed in detail the two methods for your convenience. Take a look at them to choose which one you should go for-

Method 1: Install GFCI Receptacles

This appears to be a straightforward solution, but it isn’t. Ordinary stores are reasonably priced. GFCI receptacles, on the other hand, are costly. Mounting a GFCI outlet across each socket in a diner with up to three outlets is indeed not complicated. 

It’s a whole big change to install a GFCI receptacle per each outlet in a floor with a twelve. Some people are willing to bear the financial burden of this alternative. 

They appreciate the simplicity of knowing that each GFCI receptacle simply monitors the electrical flow in a single outlet. Others, on the other hand, cannot afford this setup. Make sure to see if the black and white wires are linked together.

Method 2: Install GFCI Receptacles In Series

The majority of consumers prefer to connect their GFCI outlets in a series. You attach all of the outlets to an one GFCI receptacle instead of putting a GFCI receptacle at each one.

The same GFCI protection is provided to all downstream outlets. As it is to the outlet where the receptacle was put. This choice is less expensive, as you can see. 

That’s because you can utilize a single GFCI receptacle to protect many outlets.

These are the methods you can follow to install multiple GFCI outlets on one circuit. For any queries, take help from an electrician.

How To Install GFCI Outlets? 3 Easy Steps

Installing GFCI outlets is not an impossible thing to do! But I can say that it is sophisticated. Get ready to be fully concentrated if you want to install gfci outlets yourself!

I have explained the process in 3 simple steps so that you can install it yourself. Take a look at the details I’ve covered-

Step 1: Turn Off The Power

First of all, ensure that the outlet’s electricity is switched off. Now remove the cover plate and pull out the old receptacle. Now, you need to disattach the cables from the outlet.

Replace any wires that appear to be frayed at this time. Confused about the wire to use in its place? Take a cue from the following suggestions-

Product 1
Product 2

These wires are quite long-lasting and easy to work with. When you use them, you should not be disappointed.

Step 2: Check On The Long Wires

Examine whether the existing wires are long enough to link to the new receptacle properly. If it is the other way around, you must change the wire gauge on the circuit.

With that, attach a pigtail wire. Connect the wires to the proper ends on the GFCI receptacle.

You can also look for new types of wire, such as cerro or romex, if necessary.

Step 3: Insert Ground Screw

Finally, screw in the appropriate ground screw in the outlet box. With a conducting wire, attach the bolt to the receptacle’s grounded terminal.

When everything is connected, the outlet and receptacle are installed in the wall. The covering plate should therefore be restored.

Finally, you’ve got a fully functional outlet.

This is how you may install the electrical gfci outlets in your home. Don’t go any farther if you’re confused or detect something weird. Immediately seek the assistance of an electrician!

What Are The Different Types Of Outlets That I Can Use?

There are mainly two types of gfci outlets you can find. Take a look here to know about them in detail.

Basic GFCI Outlets

Ground fault circuit interrupters are the basic GFCI outlets. These are the ones, protecting against power surges. These are the outlets that are designed to defend against power surges. These outlets significantly reduce the risk of electric shock.

They accomplish this by turning off any electrical circuit as quickly as a shock hazard arises. In regions where there is water, this form of execution is essential.

It’s possible that you don’t have a FI outlet in your home. Install it at the very least in the bathroom or kitchen in that situation. To identify the GFCI socket, locate the socket with the check and reset buttons.

AFCI Outlets

AFCI outlets (arc fault circuit interrupters) are a type of arc fault circuit interrupter. These devices reduce the risk of electrical fires by constantly measuring the amount of current flowing through a circuit.

They shut off the connection if there are any unintentional arcs. These outlets have test and restart buttons and look like GFCI outlets.

AFCI protection is divided into two categories. The two types of AFCI components are AFCI electrical components and AFCI outlets. Consult with your electrician to determine the best option for your home.

Also, check to determine whether any parts of your home are required to have AFCI protection by the local power code.

These are the two types of outlets that you can use!

FAQs

Question: What is the least number of gfci needed on one circuit?

Answer: Each circuit just requires one GFCI outlet. Assume it’s at the start of the line, and the other outlets are all loaded. If they were connected in series, the other outlets would not receive the right voltage when a load is present.

Question: Will there be any hazard having 2 gfci outlets on one circuit?

Answer: The answer is no. Because the load side of the first is connected to the second. It’s also possible that it’s on the same overcurrent protection or breaker as before.

Question: Is it okay to daisy chain gfci outlets?

Answer: There’s no need to daisy link GFCI devices meant for home installation. Because they’re all configured to trip when there’s a leakage current of roughly 6 milliamperes. GFCIs that are connected in a daisy chain do not provide any additional protection.

The Final Words

Now you know if you can install multiple gfci outlets on one circuit or not! You must go through the instructions thoroughly that I provided.

I believe my information and instructions are quite helpful to you!

I wish you very good luck!