Skip to Content

How to Paint Over Marble [10 Essential Steps]

Painted marble looks very beautiful. As much as it is charming to see, they also enhance the beauty of the house. If you might’ve wanted to paint over your marble, because of looking more attractive. But you actually don’t know how to use it.

How to paint over marble?

First of all, you have to select a better area. Secondly, cover those sections where you won’t be painted. Then will erase the polishing upper part of the marble and also apply oil-based primer. After that, you have to wait for a few hours to dry. And accordingly, you have to paint over marble.

Are you confused after reading this? No worries! We’ll show in detail on this issue step by step. 

Just jump to the next part!

Painting Over Marble 

Marble may be hard to paint due to its smoothness. You can paint over marble and make it appear amazing with the appropriate preparation and brushing. You can also paint over metal lockers.

Whatever! Now, we’ll present some steps to paint over the marble.

Step 1: Choose a Well Ventilated Area

Use protection and work in a better-ventilated location. When sanding and painting, it’s critical to have adequate ventilation so that the dirt and gasses don’t cause breathing problems. To circulate the airflow, open doors and windows or use a blower or fan. Also, a  mask should be worn.

Step 2: Cover with Drop Cloth

Cover the section you don’t really want a painting with a drop cloth and mask. Paint leaks can be prevented by using a drop cloth or an old blanket. Painter’s tape can be used to fix the fall cloths and hide other places that you don’t want painting.

Step 3: Sanding

To erase the polish from the marble, use 36 grit sandpaper. Because paint won’t adhere to marble’s shiny texture, it’s vital to provide roughness. To erase all of the finishing from the surface you’re intending to paint, sand it using 36 grit sandpaper backward and forth. 

Continue sanding until there are no more shiny patches. When you’re completed, the marble should seem dull and feel a little rough.

Step 4: Clean the Sanded Parts

Use a moist tack cloth to clean the area, then let it be anhydrous. Rub out the surface with a moist tack cloth to eliminate the dirt formed by sandpaper. To eliminate all dust and garbage, rinse or replace the tack cloth as needed. 

Then, to clear any remaining moisture, use an anhydrous tack cloth. Then, before continuing, you must wait until the substrate is entirely dry.

Step 5: Use Primer

Apply an oil-based or petroleum-based primer to the marble. If you don’t use an oil-based or petroleum-based primer, the painting won’t adhere to the marble’s uppermost layer. 

And also you couldn’t use white color as a primer.

Apply a small amount of paint to the whole surface of the subject you wish to paint with a painting brush or rollers.

To help you out we have suggested some top-notch quality painting rollers in the market:

Product 1
Product 2

To prepare the marble, use lengthy, actual strokes in the same direction with these brushes.

Step 6: Let it Dry

Wait 6-8 hours for the base to dry. If you don’t allow the base to dry completely, this could spread. And you’ll have to begin again. Prepare to complete this work over the course of some days to ensure that the ultimate product is precisely what you desire.

Step 7: Paint

Use a high sheen oil or petroleum-based paint to paint the texture. You may paint over the primer after it has dried. Apply a tiny layer of high gloss oil or petroleum-based paint in the pigment of your choosing using a clean paintbrush or roller. Rather than painting some taps up and down and others back and forth, make sure to coat in a similar direction.

Step 8: Final Drying

Allow for a 16-hour drying time between each application. Wait at least 16 hours after applying the first layer of paint before adding a second. The finish will bubble, smear if you speed the task. If you are confused about choosing color paint then you’ll see porter paints and Sherwin Williams.

Step 9: Add Coating

If mandatory, apply more coats. Confide on the color you are painting and how it appears after each application. You may expect to apply another coat and maybe a third or fourth as well.

You can apply more coats using a similar way as previously. Make sure each coat is completely dehydrated before proceeding.

Step 10: Let the Paint Fix

Allow seven days for the paint to fix. In the interim, it’s necessary not to reach or place any other thing on the marble. Contrary, the things may adhere to the texture and scrape away at the paint.

Alternatively, you can formulate a marble effect on nearly any surface using a few different colors of paint.

No matter which method you choose. You’ll have a beautiful, freshly painted painting with a little time and effort. You should also dry the paint faster.


Question: Is there any paint that I can put on marble?

Answer: For persons who want to paint marble surfaces, chalk paint is a common alternative. It leaves a smooth finish and requires less preparation than other paints. Epoxy coatings provide your surfaces with added durability and a polished texture which may turn your marble seem like new.

Question: Is it possible to clean marble using paint remover?

Answer: Yes. For removing graffiti and spray paint off the marble and natural stone walls, “No Paint Star” Sealer Stripper and Paint Remover is suggested. “No Paint Star” is a water-based painting clearance gel (da confermare) that can eliminate paint from any surface and is easy to use, even on walls.

Question: Is it possible to alter the marble’s color?

Answer: Changing the color of marble is exceptionally difficult. Some white marbles, on the other hand, have been colored. Attempting to color pink marble will almost certainly result in it darkening. If you don’t like the color, you might exchange it or cover it with a tablecloth.


That’s all about how to paint over marble. We made an effort to bring about this tutorial as skillfully as we could for you. 

Don’t overlook any complications while maintaining it. And further, make sure to maintain a fan running or open a window while sanding and painting.

Thank you for keeping up with us till the end.

Wish you good luck in fixing the issue!