Commonly, new brass fixtures get old over time. Eventually, it looks very odd as it abates the beauty of one’s territory. That’s why you might be interested in giving it a fresh and new look.
How to paint brass fixtures?
The task starts by disassembling the chunks of the brass fixtures. Cleaning them clearly and wrapping the unnecessary part that won’t be painted. Apply primer to protect the brass from corrosion. Apply even a coat of spray paint over the source of the fixture and dry for several minutes.
There’s a lot more to explain. And for that, we’ve got an entire article to answer each of your queries in detail.
Without any delay, let’s get into the discussion!
Steps to Paint Brass Fixtures
Painting brass fixtures is something similar to painting metal-type lockers. It’s because brass is one kind of metal alloy. And that’s why the process is almost the same as the metal one.
Our process includes several steps to be accomplished. For your better comprehension, we have explained our methods in a step-by-step manner.
With these 4 easy steps, you’ll easily be able to brush up your fixtures to give them a new touch. Let’s spill the beans:
Step 1: Necessary Equipment
Before we start our task, we need to accumulate some tools and equipment. The list is as follows-
- Newspaper or Soft Cloth
- Detergent or Aerosol or Glass Cleaner
- Spray paint
- Acrylic Enamel Paint
- Scrubbing Sponge or Fine Steel Wool
- Sand Papers
- Epoxy Primer
You might wonder why we need so many elements. There are numerous ways of painting or coloring your brass fixtures. So depending on your preferred color scheme you’ll need different equipment.
That’s why we’ve gathered all possible elements you’ll need for applying any of the color schemes you want. However, in the following step, we’ll learn how to disassemble the brass fixtures.
Step 2: Disassemble The Brass Fixtures,
First of all, remember to turn off the power supply to avoid any kind of short circuit. It’s the most important step before you start disassembling the fixture. Then gently pull off the screws using the screwdriver.
In that case, you might find something called knobs. This round-shaped cover commonly hides the screws under its hood. So be sure you’ve checked those hoods to uncover the screws.
Also, remove the screws of the mounting cover of the chandelier. You may find it on the wall or the ceiling. You may need the pliers to loosen the screws for easy removal.
Disassemble the light fixtures mildly and disconnect relevant wiring. Most importantly check the availability of electricity using a tester once more. Follow the manual from the manufacturer for clean and perfect removal of the light fixture.
Also, remove the bulb from the fixture and place them in a safe zone. If you don’t know how to change a bulb in flush mounts you should learn it first. Otherwise, a wrong approach might end up with the removal of a broken bulb.
After this task is accomplished, it’s time to prepare the fixture for painting.
Step 3: Cleaning The Chunks Before Painting
Preparation before painting includes cleaning and wrapping the surface of the fixture. These two procedures are described below:
Initially take any spray cleaner or detergent. Apply these cleaners over the fixture surface to remove the debris on it.
Use a sponge or fine steel wool to apply to the brass lamp. Once the cleaning is finished, wait a while to dry it properly.
After the cleaning is dried, you should take some cloth and paper to wrap around. Crumple the paper around light sockets and wires to avoid painting the wiring.
Also, wrap around those objects on which you don’t want to paint over. Place a damp cloth over the floor and around the area to protect it from paint.
Thus your wrapping and cleaning phase ends. Later on, your final step, painting on the fixtures is to be done.
Step 4: Painting The Fixtures
This step is divided into two parts. One part will describe how we can make the brass last longer. And the other part will explain the way of applying the paint.
Let’s learn about the details:
As the brass oxidizes naturally we need to do something to stop this metal corrosion. And that’s why we’ll use self-etching primers.
Before heading with primer, you should know if white primer can be added to your list. Because it’s not suitable for all cases you want.
This spray will protect the brass from the air and stop the process of oxidizing. Also, an epoxy primer should be used to make the paint stick longer.
To start with spray paint, shake the paint bottle properly. It’ll make the paint stronger and sustainable for a long time.
For a sustainable coating, you have to paint at least two layers. Firstly, apply a thin even coat over the surface of the fixture. You can also paint the screws. It’s recommended because it’ll abstain the screws from metal corrosion due to oxidation.
After finishing the first touch, wait for a few minutes. Let the paint dry properly and wait for the specified moment mentioned in the manual. Better to dry for at least 10 minutes.
After that, apply another or a few more coats of paint to evenly spread the paint all over the fixture. This time make sure none of the parts is kept bereft of the paint. Later on, let these parts dry for about 24 hours.
Once all of the parts get dried, your painting task is finished. Now you can observe it shining like the new one.
This is the method of spray paint. You can also follow the brush paint method. In that case, the following steps will be as it is.
The point you have to remember is that brush paint takes much time and attention to accomplish. Also, it’s a bit tougher to apply even coating than that of spray paint. Moreover, brush paint is less sustainable than spray paint.
That’s why we highly recommend going with spray paint. And for your convenience we’ve mentioned some best to budget spray paint in the box below:
That’s all about the process of painting any brass fixtures. At the last step, you have to reassemble the scattered parts altogether. It’s requested to read through the manual on how to assemble the chunks properly to avoid mistakes.
Question: Do you need to sand the brass before painting?
Answer: Yes. You should sand the surface properly and later glaze primer to smoothen the surface. It’ll make the paint stick to the surface for a long time.
Question: How can we remove paint from any brass material?
Answer: Use Vinegar to soften the paint first. After applying vinegar, wait for 10-15 minutes. Later on, use any paint scraper to take off old paint from the surface.
Question: Which paints are best for painting on brass?
Answer: Any permanent paint. Paints including acrylic, enamel, or latex-based, each of these is suited for brass materials. Just remember to prepare the surface with primer before painting for the best output.
That’s where our discussion comes to an end. We’re grateful that you’ve read till the end of the article. Hope by now you have got the idea of painting brass fixtures.
Follow the steps we’ve mentioned for giving the perfect touch to your brass fixtures.
Best of luck with your attempt!
- How To Remove Floor Tiles Without Breaking Them [Explained] - November 17, 2021
- Will Magic Eraser Remove Water Stains Off Ceiling? Answered! - November 17, 2021
- Cleaning A Black Stovetop [3 Simple Methods] - November 17, 2021