How To Get Plastic Nuts Off The Kitchen Faucet? [4 Step Guide]

We may get commissions for purchases made through links in this post.

Plastic nuts are difficult to handle sometimes.  It often breaks, starts to leak, it can’t even take the heat. Sometimes, it gets too hard to open the nut, we even have to drill it to remove it. This is a problem no one likes to deal with. 

Having them on kitchen faucets can especially be a hassle. Removing them is the best option here.

How to get plastic nuts off the kitchen faucet?  

First, go under the faucet area, unscrew it with a wrench and pull the nut off. Sometimes, it gets too hard to unscrew it. You have to apply penetrating oil to loosen it up. Or you have to drill it and break it for removal.   

There’s more to know about the process. Let’s dive in to know the details!  

How To Replace Plastic Nuts Off The Kitchen Faucet? 

Removing plastic nuts from a faucet is easy and you can do it yourself. You just have to follow the 4 steps we’ve provided. And your work is done! 

Required Tools

To replace the plastic nuts with metal nuts, you need some tools. Before you begin, make sure you have all these tools:

  • Basin Wrench
  • An adjustable wrench
  • A screwdriver
  • New stainless metal nuts
  • A towel
  • A bucket
  • Penetrating oil
  • Drill machine
  • Teflon tape 

Step 1: Remove All The Dirt Under The Sink 

First, turn off the main water valve. You have to do this to ensure that there is no damage to the valve. If there is, you may have to replace your valve. And replacing a valve could be expensive.

You can also fix valves by not turning off the water, but it can cause some problems. For example – if there’s pressure in the pipes you can flood your kitchen.

Fixing it by turning off the water is a simpler method.  

Now, after turning off the main water supply, drain the extra water from the faucet. Use your bucket to collect that water. Then clean the underside of the faucet and remove all the dirt. 

Place a towel and a bucket under the sink to collect the extra water in the pipe. 

Step 2: Unscrew The Nuts 

Now locate the plastic nuts and try to unscrew them by hand. If it is tight, use your basin wrench to do the job. If the nuts are hard to open, use a few drops of penetrating oil to loosen them up.

After applying the oil, wait for some moments, then try again to unscrew it. 

Still not working? Then take a drill machine to drill on the side of the nut. Then, use your screwdriver and put it in the hole. Rotate it until you can remove it. Solving this problem is as easy as replacing a faucet. 

Step 3 Replace The Old Nuts With New

Now it’s time to replace the old nuts with new stainless steel nuts. Take your new nuts and attach them to the supply lines. Then wrap some Teflon tapes on them. 

Now, use your adjustable wrench to tighten them up.

If you’re looking for the best stainless metal nuts, we have some suggestions for you:

Product 1
Product 2

Step 4: Check For Leaks  

Turn on the main water supply valve and check if there’s any leak. If you find leaks, you have to open the nut again. Add more Teflon tapes in it and tighten the nut even harder. It should stop the leaking. 

If it is still not working, you have to replace the valve. If you’re still facing any issues, take help from a professional plumber.  

Things To Keep In Mind

While you’re working with the nuts, make sure to keep some things in mind. Follow the instructions we’ve mentioned below to ensure safety:

  • It’s important to ensure you turn off the main water supply line. This will save water as well as avoid problems.
  • Use good quality cleaners to remove dirt from the faucet
  • Do not use too much-penetrating oil, 5-6 drops will be enough
  • Before you go under the sink, wear glasses.
  • Always collect the extra water in the pipes 
  • Make sure to maintain the safety measures while using the drill machine

Well, that was all we had to offer today. By now you should have a clear idea of the process of getting plastic nuts off your kitchen faucet. 

FAQs       

Question: Why is my kitchen sink leaking at the connection nut?
Answer: The most common reason for leaking at connection nuts is having faulty valves. Tighten up the nuts with an adjustable wrench, it should stop the leaking. If it still doesn’t work, you have to replace the valve.

Question: What is the ideal diameter size of a faucet nut?
Answer: The ideal diameter size of a faucet nut is 1.5 inches. But they also come in different sizes. So, be aware when you buy one.

Question: What is a hex nut?
Answer: Hex nuts are the most commonly used nuts. It has six sides, that’s why it is called a hex nut. It is used in bolts, screws, rods etc. 

Conclusion

That’s a wrap-up! Follow the given 4 steps to learn how to get plastic nuts off the kitchen faucet. If you have the proper tools, you can remove them yourself. 

We hope this was helpful for you. Good luck!

Melissa Hawkins