Have you recently installed power srtips and have a surge protector in hand? Then you must be wondering if it’d be okay to plug the power strips into the surge protector.
That’s not an unusual concern. Hence I’ve taken the time to clear your confusion.
Can you plug a power strip in a surge protector?
Yes, you can plug a power strip into a surge protector. Although it’s not recommended by the experts. Power strips provide multiple outlets which are also very inexpensive.to use a power strip, check the ratings of the power strip given in the packaging beforehand. Then check the rating of your appliances. Finally, use the greatest gauge you can find.
Sounds good so far? That’s just the basics, but to understand the whole concept, you need the details. I have provided a thorough explanation for you. So, read along to find out more!
- Can You Plug In a Power Strip in a Surge Protector?
- How to Plug in a Power Strip in a Surge Protector? 3 Easy Steps
- Is It Okay to Plug in a Power Strip in a Surge Protector?
- Precautionary Tips
Can You Plug In a Power Strip in a Surge Protector?
Yes, you can plug in a power strip in a surge protector. Power Strips provide more outlet to the consumers. Which is more convenient to connect more electrical devices.
People plug in a power strip into a surge protector for two reasons essentially. Firstly, to have more electrical outlets. If you have a surge protector which has six outlets. And, plug in a power strip which also has six additional outlets.
So you can connect twelve electrical devices at the same time.
Secondly, to prevent power surges. A surge protector is designed to be able to protect your electronic devices from electrical spikes. Electrical spikes can happen due to many reasons.
Lightning spikes, faulty wiring and high voltage appliances cause electrical spikes very frequently.
All the gadgets that are available to you can take advantage of a surge protector if power strip’s are plugged into it. In addition to not having to install multiple extension cords. Through this, you can save more electrical gadgets from harm caused by electrical surge or spike.
How to Plug in a Power Strip in a Surge Protector? 3 Easy Steps
Plugging in a power strip to a surge protector can seem difficult. But even beginners can get this job done. I have described the process in 3 simple steps.
You’re likely to succeed if you follow my guide thoroughly. The steps are given below-
In order to plug in a power strip in a surge protector, you’ll need some tools. Tools that ensure your safety and the actual preceding of plugging in.
- Power Strips
- Surge Protector
- Your appliances
Step 1: Check the Ratings of the Power Strips and the Surge Protectors
Check the ratings on the power strips.
Check the amount of electricity they can safely draw. It is given in the packaging. Be conscious not to overload it accidentally. Overloading the power strip or surge protector can cause fire.
Step 2: Check the Ratings of Appliances
Check the rating of your appliances that you will plug into a surge protector.
High voltage appliances can’t be plugged into a power strip. This will overload the surge protectors. Also check if your electrical outlets are hard to plug-in or not.
Step 3: Determine the Greatest Gauge of Wire for Use
Use the greatest gauge of wire possible. It’s essential to use your power strips and surge protector’s cable as greatest as possible. This is because the higher the gauge, the more voltage the wire can carry.
This reduces the risk of overloading.
A high gauge power strip or surge protector can power high-voltage demanding appliances like refrigerators easily.
Is It Okay to Plug in a Power Strip in a Surge Protector?
Although consumers do it all the time without realising the difference between them. It’s frowned upon by the experts. Here’s why-
- If the electrical load exceeds the rating of the power strip, it might cause a fire hazard.
- Daisy-Chaining is strictly prohibited by the NFPA, NEC and UL guidelines.
- If someone else’s assets are damaged due to a fire caused by you. They can take legal actions against you.
- Daisy chaining will void your warranty.
Due to all these issues, experts often do not recommend daisy chaining the power strips.
Even though you can plug in a power strip in a surge protector. You must be careful about some precautions. There are some do’s and some don’ts to plugging in power strips to surge protectors.
I have mentioned some tips for you below. Check them out if you want to get the best results:
Tip 1: Get your wiring done by professionals
Power strips or surge protectors are not a permanent solution for faulty wiring. Do get your home wiring done by a professional as soon as humanly possible.
Tip 2: Don’t use power strips outside
Power strips are only meant for indoor uses. So make sure you don’t use it outdoors.
Tip 3: Keep the power strips and surge protector exposed to the air
At no time or circumstances, power strips or surge protectors should be exposed to moistures. This can cause your appliance to malfunction to worse, short circuiting your house.
Keep your power strip and surge protector uncovered in the air. So, the air will circulate around the power strip and the surge protector easily. This will keep the moisture away.
Tip 4: Plug only one power Strip to the outlet
Plug only one power strip or surge protector to the wall outlet, no more than that. Also, it should be plugged into a grounded wall outlet which is well earthed.
Tip 5: Use power strips for low voltage appliances
Only use power strips for low voltage electronic appliances. High voltage appliances might create fire hazards. Use a different circuit for your high voltage appliances.
And finally, keep the childrens away from any sort of electrical appliances, power strips or extension cords.
Question: How to tell if a power Strip is a surge protector?
Answer: A surge protector will have a joule of energy rating in the box or in the cable. It shows it’s maximum capacity. Power strips will have no ratings as such.
Question: Are power Strips different from surge protectors?
Answer: Power Strips offer convenience over protections. Power strips often feature only a circuit breaker. This circuit breaker acts as a master power on/off switch.
On the other hand, a surge protector offers real protections against electrical spikes. It might look just like a power strip but it will stand in the way of power surge and your valuable appliances.
Question: Are all Surge Protectors the same?
Answer: A Surge protector offers a layer of protection between your appliance and electrical spike. These frequent power spikes can damage your gear. But not all surge protectors offer similar protection.
Now you have the answer to your question, can you plug in a power strip in a surge protector. I sincerely hope that this article will clear all your questions regarding power strips and surge protectors.
For further queries, you can contact a professional.
Until next time. Have a beautiful day!
- Plug UPS Into A Surge Protector: Things You Need To Know - December 23, 2021
- Can You Plug A Surge Protector Into An Extension Cord? [Answered] - December 23, 2021
- How to Wire a GFCI Outlet with Multiple Outlets [Step-by-Step Guidelines] - December 23, 2021