How To Space The Pole Barn Posts? [Here’s How To Do It]

We may get commissions for purchases made through links in this post.

Constructing a pole barn but have no idea how far apart the posts should be spaced? That certainly sounds complicated for amateurs. For a seamless building experience and a high-quality completed product, the posts must be properly positioned.

So what should be the pole barn post spacing?

Posts for pole barns should be spaced 8 to 12 feet apart. It also relies on the size and style of the barn. This breadth ensures even weight distribution and overall pole barn strength. You should utilize posts with a minimum of four inches by four inches in size. They’re also strong enough to withstand the barn’s weight.

Now, this might seem a lot to take in. But we’ve got an easy-to-understand guide awaiting you. Keep reading to get a proper idea about it!

Let’s get started!

How Far Apart Should The Pole Barn Post Be?

The normal distance between pole barn posts is 8 or 12 feet. Different pole spacing may be found in custom-built pole barns. Smaller pole barns may also benefit from the closer spacing between posts. 

Let’s see the drills to make sure about the right spacing of pole barn post-

Step 1: Maintain The Direction

If you’re putting together a pole barn from a kit, make sure to follow the assembly directions. Also, make sure that the post spacing is correct. Decide if you’ll need to adjust your pole location or stick with the usual 8 or 12 feet. 

Step 2: Maintain The Typical Spacing

You’ll want to stick to the typical spacing for the great majority of pole barn styles. It will largely be determined by your personal tastes as well as the dimensions of your pole barn. And it doesn’t matter whether you space your posts 8 or 12 feet apart.

Step 3: Finishing

Using 8-foot spacing for a larger pole barn will necessitate more posts and ceiling trusses. Setting posts 8 feet apart would provide a sturdy foundation rather than spacing them 12 feet apart. But 12 feet apart is equally appropriate and frequently desired.

How Do I Set Pole Barn Post Correctly?

It’s time to start building your pole barn when you’ve decided on its size and the sort of posts you’ll use.

Step 1: Measurement Of The Pole Barn

First of all, measure the fundamental dimensions of the pole barn. Make sure to write down the relevant figures and dimensions for reference. 

Mark the pole barn’s outline in the exact spot where it will be built. Precise measurements are essential. It’s also a good idea to take a few practice measurements before taking the final one.

Step 2: Mark Spots For The Pole

Measure the distance between each post once you’ve drawn the outline of the pole barn. Make a note of where you’ll dig each hole. Make sure the holes opposite each other are perfectly aligned. 

Because the ceiling trusses will eventually be supported by the posts. The alignment of the entire pole barn will be off if the posts aren’t square with each other.

Step 3: Dig Holes For The Poles

Make your craters. You can dig with a shovel by hand or with a backhoe. Ascertain that each hole is at least three and a half feet deep and wide. The hole gap can be similar to the gap between tub and floor tile.

Not sure what to measure with? Well, you can get a measuring tape from the suggestions you’re giving below-

Product 1
Product 2

These are the shovels that are quite long-lasting.

Set The Poles With Concrete

Place the posts in the holes and fill them with concrete to secure them. You might hire a cement truck to help you pour the concrete. Setting with the concrete is quite similar to setting concrete under a tub.

After placing the posts, use a level to check that they are perpendicular to one another. The strength of your barn depends on level posts. And the strength of the building will eventually be determined by them.

Finalize The Position

Use a guidewire to ensure that all of the posts are aligned. Before the concrete sets, make any required adjustments to the posts. Leave the concrete for 24 hours to set after all of the posts are lined up and square.

What To Do After Setting The Poles?

It’s time to start constructing your roof after the posts have settled. Attach a beam that runs the length of each row of posts. 

Place each truss in its proper location. Metal plates and screws are used to secure them to the beams. 

You should now be able to start adding the roof and wall materials. Nail or screw each steel or aluminum panel to the purlins on the roof. 

Nail each wall panel to the supports and cross beams. Make sure they’re all the same size and that there are no gaps between them. 

You can now concentrate on the interior of the pole barn. Now, you have the option of adding any features. 

That’s all you need to know about the pole barn post spacing. These are the information you need while working with pole barn.

FAQs

Question: Is it okay to build a pole barn consisting of 4×4 posts?

Answer: Post Frame Buildings employ square or rectangular posts, whereas Pole Buildings use round poles. 4×4, 4×6, 5×5, 6×6, or bigger treated timber or laminated columns are typically used. Any lumber that is within 18 inches of the ground should be treated.

Question: How to stabilize a pole barn?

Answer: The barn will be strengthened by starting at the bottom of the poles and installing one whole run of planks. Run many boards horizontally for a more dramatic effect. And make sure they’re 4 feet apart as they climb the barn poles. Keep on doing this all the way around the barn until it is entirely stable.

Question: Is a pole or garage barn cheaper to build?

Answer: A pole barn is cheaper to build. A pole barn can be built for a fraction of the cost of a stick-built structure. The weight of the walls and roof are supported by posts sunk in the ground in a pole barn. A typical concrete foundation is not always required.

The Final Words

Now, you know about the pole barn post spacing! We hope our information is quite simple to understand.

We hope our instructions are quite simple to work with.

Best wishes!

Scott Kelly