For both interior and outdoor flooring, travertine tile is a popular choice. With this robust material, you may produce a wide range of color possibilities and variants. But this extremely durable flooring has a propensity to get dull over time.
In response to that, you need to polish the travertine floors!
How to polish travertine floors?
First, strip the excessive material. Then give the travertine a steam clean. Now, fill the holes and cover the edges. Then give a polish to your travertine. Finally, tidy up and rearrange the furniture accordingly and you’ll be done.
This is just a summary of the answer to your concern. Make sure to keep reading to get to the details!
Sounds like what you were looking for? Let’s get started then!
- How To Polish Your Travertine Floors? 8 Steps To Follow
- Required Supplies
- Step 1 of 8: Strip Excessive Material
- Step 2 of 8: Clean The Travertine With Steam
- Step 3 of 8: Fill The Holes, Cracks, And The Chips
- Step 4 of 8: Cover The Edges With Tape Plastic Sheet
- Step 5 of 8: Polish The Travertine
- Step 6 of 8: Polish With A Polishing Powder
- Step 7 of 8: Tidy Up
- Step 8 of 8: Rearrange Your Furniture
- The Final Words
How To Polish Your Travertine Floors? 8 Steps To Follow
Travertine floors are an excellent choice esce[pacilly because they make your house look extra sleek. But most people struggle through the polishing part. Polishing travertine floors is a must if you want to keep your floors brand new.
Don’t worry anymore because we’ve curated a simple guide with 8 steps. Follow our instructions to make your travertine floors clean and shiny.
Before we get to the installation steps, we must get ready with the required supplies. The required supplies are mentioned below-
- Shop vacuum
- Protective plastic sheeting
- Travertine filler compound
- Waterproof tape
- Polishing powder
- Mop and bucket
- Floor stripper
- Weighted Buffing Machine
- Steam cleaner
- Buffing pads
Once you’re ready with the tools, get started with the installation.
Step 1 of 8: Strip Excessive Material
First and foremost, you must thoroughly clean the built-up wax and debris. Before polishing travertine floors, you must first perform this. Now go out and get a travertine stripper. Check to see if it’s meant to remove a waxy build-up from the tile’s surface.
To apply stripper to the floor, a clean mop is recommended. Rep the mopping process after applying an even application of stripper to the floor. Do it a few times with simple water. Continue doing so until all of the filth and wax have been removed.
Step 2 of 8: Clean The Travertine With Steam
Clean the floor thoroughly using a steam cleaner. The use of a steam cleaner allows thorough cleaning of the floor.
This step aids in breaking up any lingering stripper and grime on the floor. It may even aid in the removal of minor blemishes and stains from the surface. The grout between the tiles will also be cleaned using the steam cleaner.
Starting with a good, clean floor is the only way to get a high shine. And the second stage in this method is steam cleaning.
Step 3 of 8: Fill The Holes, Cracks, And The Chips
After the travertine floor has been steam cleaned, make any necessary repairs. This is to give them a fresh appearance. Filler compounds make it simple to repair cracks, chips, and other visible flaws in tile.
Epoxy grout is a good example. If epoxy is unavailable, a grout that matches the travertine color might be used instead. Follow the material’s directions, leaving enough time for curing before moving on to the next stage.
Choose a compatible color that matches with the material you’re using. The color must blend nicely with the floor’s existing color variances.
Step 4 of 8: Cover The Edges With Tape Plastic Sheet
While you polish, make sure the surfaces around the floors remain protected. Make sure the furnishings, cabinets, and baseboards are all well-protected. Tape them off and cover them with plastic sheeting to protect them.
At this stage, you can also fill the gap between the tiles and wall if there is any. After that, you can move on to polishing.
Tape the perimeter of your floor with waterproof tape. Plastic sheets can also be used to prepare the floor for polishing. If at all feasible, move furniture out of the path. This would protect the buffing machine from any damage.
Consider polishing one room at a time if you’re polishing numerous rooms. Move the furnishings to a room that isn’t being polished right now.
Natural and smooth travertine tile would give your property a traditional look.
Step 5 of 8: Polish The Travertine
A weighted buffing machine must be rented to polish the travertine tile. Begin by gently polishing the travertine surface with various grit pads.
Place a low-grit pad of diamond on the bottom of the polisher for the first pass. The pad will aid in the removal of scratches, stains, and other surface blemishes. This procedure also creates the filling compounds for holes and fissures.
It evens out the surface and gives a similar look to the rest of the floor. Continue this with higher-grit pads when the first run is completed. It should have a polishing range of 800 to 8500 till the finish is smooth.
Step 6 of 8: Polish With A Polishing Powder
Rather than using several sanding pads, use a polishing powder to polish. You’ll find the type of pad for the buffing machine mentioned in the polishing powder instructions.
Apply the polishing powder to the floor and use the buffer to push it into the tile. This procedure can be repeated if more polishing is required. You get to choose how much gleam you want on the floor.
The greater the grit and the more gleam you get from your flooring, the better. This can also help to remove adhesive.
Step 7 of 8: Tidy Up
Travertine polishing can be a messy operation. The cleaning process begins once the travertine has been returned to its former brilliance. To remove any dust that is sprinkling, wipe off the dust from the entire floor.
Apply a sealer of your choosing after the floor is cleaned and dried. This would help to safeguard the travertine’s surface. It also ensures that the floor remains gleaming for a long time.
If you’re confused about the sealer choice, look at ours:
These are the ones you’d find worth using!
Follow the manufacturer’s instructions for applying the sealer and allowing it to dry completely.
All left to do now is remove the tape from your polishing project. Remove the protective plastic from the cabinets and baseboards as well.
Step 8 of 8: Rearrange Your Furniture
Rearrange your furniture and enjoy the new look of your floors. If you wish to put carpet over the tile, you can also do so at this point. Rearrange the furniture so that it enhances the travertine floor.
A well-polished floor draws emphasis to the surface’s complex color changes. The flooring becomes a major attraction of the room’s decor.
These are the steps required to polish your travertine floors. You can also use this cleaning method after regrouting your tiles countertops and floors. The procedure of polishing travertine flooring is not very difficult, despite the fact that it is labor-intensive. Other than replacement worn-looking floors, bring them back to their former glory.
Question: Is it okay to buff travertine floors?
Answer: Buffing removes scratches and restores the sheen of the floor. It’s a good idea to use specific polishing pads by a polisher. It’s the equivalent of sanding down all the flaws and redoing the tiles. The tint of travertine tiles is continuous throughout. There’s nothing to be stressing over the surface being damaged.
Question: How can I rejuvenate my travertine floors?
Answer: To begin, use a spray bottle to saturate the travertine surface with water. On the travertine surface, apply a coating of travertine polish powder. Add more water if you want to get a milky color. Then buff the stone surface using an orbital sander and a natural hair pad. Continue until you’ve attained the required level of polish.
Question: How often do the travertine floors have to be polished?
Answer: It can vary from one location to another. Your travertine flooring might be in a high-traffic location. In that case, polish them every six months to one year. Make sure you polish travertine countertops that aren’t used often every three years. To remove any dirt or debris, wipe the travertine with a moist towel.
The Final Words
Now you know how to polish travertine floors! We hope the steps are simple and easy for you to implement!
Go through the steps thoroughly to get the best result out of it!
- How Much Does It Cost To Rewire A 2000 Sq. Ft. House: A Full Guide - December 2, 2021
- How Much Does It Cost To Install 1,000 Sq. Ft. Of Laminate Floors - December 2, 2021
- How Much Does It Cost To Replace A Central Air Conditioning Unit [Explained] - December 2, 2021