Skip to Content

How to Remove Bark From a Tree: In Just 3 Methods!

This article is for informational purposes. Always seek the advice of qualified professionals.

Do you have a tree around your home whose bark you want to remove? If you’re looking for answers on how to remove it as quickly as possible, then welcome.

How to remove bark from a tree?

The bark will become easier to separate once the tree roots have dried completely. Squeeze a hatchet or flathead screwdriver between the bark and the trunk. Use a mallet. Then you can peel the bark away. Don’t be concerned if a few little fragments remain.

Are you excited already to know more? Then scroll down.

3 Methods to Remove Bark From a Tree

We’ll be going over several methods that you can follow to remove bark from a tree. All the methods are different from each other but are very important at the same time. If you’ve tried to stop a tree from growing but failed then reading this is perfect for you.

Method 1: High Pressure Washer

Use a high-pressure washer and remove the tree bark .Apply high pressure water in a parallel direction. It makes the work of removing barks of trees easy.

Necessary Components

  • Debarking logs pressure washer of 3000psi
  • Oscillating Nozzle

Step 1: Power it Up

Firstly, locate a power supply source close to the site and connect the equipment to it. When completed, inspect for function and ensure everything’s in top condition.

Step 2: Set the Right Pressure

Washers can generate water jets with varying pressurized conditions. This is the same for the sprinkling pattern.

If you ask us, a pressure of 3000 psi is generally adequate among most timbers and hardwoods.

Step 3: Put the Nozzle on a Pressurizer

Consider the intensity and structure of the spray while selecting the appropriate nozzle. If the timber is dry enough, the bark may fall off. In such circumstances, a reduced nozzle will suffice. After you have set the nozzle in place, apply force to the wood.

Step 4: Take Off the Loosen-Up Backs

If you’re at this step of removing the bark, then you need to know something. Now, you’ve to take out the lightened barks. It can be accomplished both in dry and wet conditions and is referred to as debarking logs by hand. 

The above method will help you not just remove barks but also stop the tree from growing.

Method 2: Vegetable Peeler

Debarking small lawn oaks and their twigs are the next approach on your list. Despite their diminutive stature, you should still use some caution.

Necessary Components

  • Vegetable Peeler

Don’t have any vegetable peelers on hand, then you can take a look at some of these:

Product 1
Product 2

Step 1:  Make the Wood Shorter

Before using the vegetable peeler, you need to cut down the branch into smaller pieces. If you do so, then your work will become much easier. 

Step 2:  Make the Cut

When you’re ready-to-peel nearby trees, begin pulling the shells off with the vegetable peeler.

Take small rotations at a period, trying to ensure the incision may not be too deep. Since a deep chop also would remove a layer of wood. And in the case of a small branch, you can’t simply throw it away.

Step 3: Take the Short Branches Off

Debarking is the beginning to many masonry and woodworking projects .Particularly to ensure that the polishing is done correctly. These barks can also be stripped to make walking sticks

Method 3  Bark Spud

Steelhead and a timber handle are used to make bark spuds. These are instruments that are specifically designed for stripping tree bark after it has become flexible enough. They can be identified by the ice cream scoop-shaped blade that comes with it.

Necessary Tools

  • Tree bark spud
  • Small hunting knife

Don’t have either of the two at hand, but you want  to follow this method to remove the bark? Here are some unique brands of these tools that we recommend to use:

Product 1
Product 2

Step 1: Identify the Spot of Cutting

You must identify the surface that the tree barks and the wood of the branch meet. 

Step 2: Decide the Correct Side

A bark spud has 3 slicing edges. They are each meant to dig into various types of bark and generate sliding incisions. You must perform the initial cut depending on what type of bark you are dealing with.

Step 3: Keep Yourself Safe

While you’re debarking a tree limb with a spud, its cutting edge won’t be further away. Don’t get confused by thinking that it’s the same as cutting pvc pipes. It is critical to keep your limbs and other people near you informed of the situation.

Step 4: Peel in Step by Step Process

Begin with the very first piece of wood and insert the cutting edge. Go through the base with the spud and simply remove that covering. When you’re finished, repeat the process with the next part of the bark.

When you are done, you will notice there will be a covering of barks. These are too tiny to cut with a spud. Remove them with a hand knife.

These methods can be used to remove barks from a tree easily. Does the tree seem too close? Then use a chainsaw to cut down the tree.


Question: How do you repair a massive tree bark that has been damaged?

Answer: If the tree has only been damaged, clean the area with ordinary soap and water. It will help limit the amount of germs that may be present in the scrape and cause even more damage. After that, properly wash the wound with normal water. Allow the scratch to heal outside.

Question: Could a tree regrow its bark?

Answer: Yes it can regrow itself. If it falls off, the inner surface of live tissue is exposed to illness and insect infestation. It does not regrow. To prevent any disease, a tree will regrow at the borders where they are cut. But it will not grow back in the full region.

Question: What exactly is tree girdling?

Answer: Girdling is an old way of dying trees without falling them. Girdling is the process of removing the bark, cambium, and sometimes sapwood from a tree in a ring that wraps completely around the trunk.


This was all from us on how to remove bark from a tree. We tried to convey all of our knowledge on this topic. If you have any further queries, let us know in the comment section.

Thank you for staying with us till the end!