Let’s say, you’ve arrived home after a long day of work and you see large clay stains on your favorite carpet. Now you’re going out of your mind thinking you’ll have to buy another carpet. Well, you don’t have to because it can be easily fixed.
But the question is: how to remove clay from carpet?
Following our 6-step method will remove any kind clay from your carpet. First, you need to remove as much clay as you can. Then, dry and vacuum the carpet. After that, apply a cleaning paste and clean it. Then, apply a detergent solution. Finally, use a steam cleaner and dry out the carpet.
However, there’s more to the process. So, if you happen to have some spare time, let’s start-
How to Remove Clay from Carpet?
While a lot of people struggle to remove clay stains from their carpets, it’s not that hard if you follow the correct steps. Here’s what you need to do-
Step 1: Remove as Much Clay as You Can
We all know that clay is wet and it can easily get into the fibers of a carpet. That’s why you should remove as much clay as you can right after it fell on your carpet.
You can use any from a butter knife to a dustpan. Use whichever you prefer to scoop up the clay.
Step 2: Dry the Carpet and Vacuum
After you’ve scooped up the clay, it’s important that you wait for at least 8-10 hours for the clay to dry. Once it’s dry and hard you break it into pieces, making it easier to remove.
Then, plug in your vacuum cleaner and thoroughly vacuum the area. This way you’ll remove most of the clay from the surface of the carpet.
However, don’t think that this is over yet. There’s still a substantial amount of clay stain on your carpet.
Step 3: Apply a Cleaning Paste
First, you need to soften up the area with some hot water. Pour a little bit of hot water on the stained area and wait 2-3 minutes.
Then, apply a cleaning paste over it. We suggest using Quick n Brite or Oxiclean. These two have a good track record in removing any kind of stain.
Use a clean white rag or cloth to scoop a good amount of cleaning paste. Place the rag on the clay to properly mix it. Now take some time to do it as it’s important to mix it perfectly with carpet fibers.
Step 4: Clean the Cleaning Paste
You have to give it some time to work before you remove the cleaner paste. Not waiting will make the job much more difficult for you.
The cleaner will have enough time to do its job in 10 to 15 minutes. After this, you will find that the clay stains are nearly faint and come to the top.
The cleaning process is rather simple. However, you need to be careful. The clay can spread even further as it is loosened up. So, try not to spread it.
Now grab another clean white cloth, and clean the area. Remember to continue switching to a cleaner portion of the cloth to clean the cleaner paste. Because it would be kind of pointless if you spread the stain even further.
After all the cleaner paste has been cleaned out the stain will be much lighter. But that is not the process ending.
Step 5: Apply a Detergent Solution
The detergent is a second layer of solution to remove the clay. So, it’s necessary to apply it after the cleaning paste. Now you need 1 cup of water and a few drops of dishwasher detergent to get the solution.
Remember to use dishwasher detergent for this purpose. Laundry detergent can damage your carpet.
These can be mixed in a bowl or in a spray bottle. Though it works better with the spray bottle.
Now spray some detergent solution on the clay and use a clean rag or paper towel to wipe it out. Repeat the process until you empty the bottle.
Step 5: Use a Steam Cleaner
Get ready for the final cleaning. Grab your steam cleaner and plug it in. it’s okay if you don’t have one. You can rent one for a few bucks.
Run straight lines over the stained area with the steam cleaner. Although it wouldn’t hurt to clean your entire carpet. You can also use it to clean your house.
After a few minutes, you’ll see that there’s no stain left and your carpet is back to its original state. However, this much wear and tear can damage your carpet. So, make sure you stop your carpet from fraying at edges.
Step 6: Dry Out the Carpet
It’s time to dry it after the carpet is steam cleaned. Note that the carpet must be dried as soon as possible. You see if the moisture is there for too long, bacteria and fungi will begin breeding.
Switch on the fan for a quick dry-out. If you don’t have a fan in your room you can use some silica gels. In a few hours, the liquid will be soaked up.
Question: Can I use vinegar to remove clay from a carpet?
Answer: Vinegar is a great natural product with a lot of use. While it can remove a lot of stains, often it’s not enough. If you expect to remove clay from a carpet with only vinegar, then you’re going to be disappointed.
Question: Can I wash clay stains off a carpet?
Answer: Theoretically, you can do that. But it won’t be efficient as it’ll take a lot more effort and time.
Question: Can I use a brush instead of a vacuum cleaner?
Answer: You can choose to use a brush but it’ll cost you time and effort.
Removing clay from a carpet is not a common scenario. But with the help of our guide, we hope now you know how to remove clay from carpet.
So, if you’re in a situation where you clean clay stains, you’ll know what to do.
- Tub Rough Opening Too Big or Small: A Complete Guide - July 15, 2021
- Shower Diverter Fell Out? Here’s How You Can Fix It - July 15, 2021
- Pitless Adapter Leaking: Causes & Solutions - July 15, 2021