Skip to Content

How to Remove Drawers with Stops [6-Step Solution]

While moving to a new house, you’d want your furniture to be as light as possible. A dresser is one such heavy furniture that needs to be disassembled to make it light. But the drawer stops are keeping the drawers from completely coming out.

How to remove drawers with stops?

Open the drawer all the way it allows you to, and locate the stop. Push the drawer a little way back and lift the front side up a few inches. This will create an angle for the drawer. Pull the drawer while maintaining the same angle and your drawer will be removed. 

Need some more insight? You can get a better understanding of the topic from this article. Tag along!

How to Remove Drawers with Stops?

Drawer stops are little, handy plastic tabs that keep your drawer from opening all the way. Stops can fix your failing drawers, making them stable and easy to use. Stops are attached to the back of the drawer, putting resistance against the drawer frame.

Once in a while, you might need to pull out the drawers to clean them. Or maybe you’re about to move out and need to remove the drawers to reduce weights. In both scenarios, drawer stops will prevent you from separating your drawers.

Removing drawer stops is actually a very easy affair and doesn’t require any heavy tools. You can finish the task only with your hands most of the time. In special cases, you might require a screwdriver to unscrew the stop. 

The process is somewhat similar to removing self-closing drawers. With that said, here’s how you can remove drawers with stops:

Step 1: Identifying the Stop

Before you start rolling your sleeves, make sure that the drawer actually has a plastic stop. Gently pull the drawer to see if there’s any resistance after a certain point.

For stops built into metal glides on the sides, the drawer will open by three-quarters.

Step 2: Remove the Contents

You can’t perform the operation with a full drawer. For that, you need to remove some of the contents of the drawer to lighten it. 

It’s best if the drawer is completely empty, leaving you with much space to work. If you’re removing stops from all the drawers, you should empty all of them.

Step 3: Begin from the Top

Starting from the top is a good idea if you’re removing all the drawers. It’ll keep the cabinet or dresser from facing a weight imbalance. If the dresser has a light built, it can tip over from the imbalance.

Step 4: Pull the Drawer All the Way out

Open the drawer and pull it out as far as the stops allow you to. Stop pulling once you feel resistance from the stop. Avoid tugging the drawer or forcing it out of the cabinet. This will break the stop.

If you paint the kitchen cabinet interior, tugging the stop too hard can scrape the paint.

Broke your stop while tugging too hard? These stops can be a great replacement-


These stops can fit in most standard cabins and drawers. They are durable, so you won’t have to worry about wear and tear.

Step 5: Pivot the Drawer

Push the drawer back by a little to prevent it from bumping the stops. Raise the front of the drawer by a few inches to make an angle. It’ll help to lower the drawer from the stop and clear the cabinet facing.

Step 6: Pull out the Drawer

Gently pull out the drawer at an angle. Place your hand under the drawer and pull the drawer out gently. When the stop gets past the facing, your drawer should be free. You can now pull out the entire drawer from the cabinet.

If your drawer has its stop located on the bottom, lift it to locate the tab. Use one hand to press and push the tab while pulling out the drawer. Release the drawer slides before pulling out the drawer.

How to Remove Truck Drawers with Stops

Truck drawers operate in a different way for high-security reasons. They usually use rubber stops on the top of their interior. You need to follow a different method for removing a truck drawer.

For drawers that have stops on top inside the drawer, you’ll have to use a screwdriver. Reach inside the drawer and unscrew the stops one by one.

After that, locate the anti-breaking brackets on both sides of the lock recess. Use a tiny screwdriver to unscrew the anti-breaking brackets from the drawer. Your truck should now be free to take out from the vault.

As you can see, removing drawers with stops is not as difficult as you might have thought. Stops are necessary for drawers to stick to the furniture. If your drawer lacks stop, you can make a makeshift stop by gluing plastic to wood.


Question: Can I lengthen the life of my drawer with soft closure?

Answer: Soft closure is a useful feature for the drawers. This feature makes sure that the drawers of dressers or cabinets are shut properly. It reduces the wear and tear of the drawers, helping to lengthen their lifespan.

Question: Is moisture bad for wooden drawers?

Answer: Your wooden drawer can get stuck when they get swollen due to excess moisture. To get rid of the moisture, you can place the drawer in an air-conditioned room.

Question: How can I childproof a kitchen drawer?

Answer: Locks were commonly used by many families to keep children from opening kitchen drawers. Nowadays, that place is gradually being taken by magnetic locks. Magnetic locks are used with a strong magnetic latch to lock the drawer.


That brings an end to our guide on how to remove drawers with stops. Don’t try to force the drawer out of the cabinet without disengaging the stop.

Good luck!