You may opt to renovate a certain section of your home, such as the bathroom. If the process requires installing tiles, it can bring in a few challenges. For example, grout haze is one of them.
How to remove grout haze?
You can remove the grout haze in 3 different ways. You can use cheesecloth and water to remove the haze. You can even use vinegar to solve the issue. If these two methods don’t work, go for a commercial cleaner. But make sure you pick the right one for your tile.
Obviously, this isn’t enough info. That’s why we’ve provided a step-by-step guide and the equipment you need for the process.
Let’s get right into it!
Things to Note Before Cleaning Grout Haze
Grout haze is a result of tile installation. It’s not that easy to remove like dirt and grime. But it’s still removable.
Before getting into the methods, you need to note down a few things. These are a must to know. Otherwise, you’ll just create more mess.
Let Your Grout Harden Completely
It’s important to remember you can’t start removing the haze while your grout is wet. You have to wait for the grout to dry. It’s a must to allow your grout to dry before sealing as well.
The grout will take about 24 hours to dry. That’s why don’t wait for more than 7-10 days. If that happens, the haze will be super hard to remove.
Determine Grout Type
Some types of grout have a lot of strength to them. They are stain-repellent. For example, epoxy grout is really good-quality grout.
But that comes with a consequence. If you mess up and haze is created. You have to use a commercial cleaner to clean it. Because natural remedies won’t work.
Determine Your Tile Type
There are different types of tiles available in the market. The cleaning method also varies from one tile material to another.
That’s why check which tile type you have. Once you determine that, you’ll understand which cleaning method to use. For example, porcelain and ceramic tiles can both be cleaned with vinegar and liquid liquids.
But tiles that are porous can’t be clean with the acidic cleaner. Instead, you have to use a cleaner that’s made for that specific tile.
How to Clean Grout Haze?
Now that we have all that covered, let’s get to the main part. Let’s check out the methods mentioned below-
Method 1: Cheesecloth & Water
If you don’t need to use much effort to remove haze, you can use this method. For this method, you’ll only need cheesecloth and water.
Step 1: Ensure Necessary Safety Precautions
The cleaning process includes grout haze remover which should be handled with gloves. They should be made of latex, nitrile, or any chemical-resistant material. These gloves are used to nail asbestos siding as well.
Plus make sure the solution doesn’t come in contact with sensitive areas like the eyes. That’s why I always wear safety glasses.
Step 2: Wipe the Haze Off
Grab your cheesecloth and dip it into clean water. You can use warm water for this.
Once the cloth is wet, you wipe the surface of your tile with it. Wipe gently and don’t be too aggressive. This will eventually loosen up the haze and remove it. If the haze is off, you can rinse the surface and dry it.
Method 2: Vinegar
Vinegar is one of the most common and useful cleaners in your household. You can use this to remove the stubborn haze too. But this method is only for ceramic and porcelain tiles.
Step 1: Make the Cleaning Mixture
You have to make the cleaning solution first. To do that, add 1 part of white vinegar to 3-4 parts of clean water. If you want you can add more vinegar or less water. This way the mixture will be stronger.
Step 2: Spray & Wipe the Surface
Take a spray applicator now and fill it with the vinegar solution. Spray the surface that has a haze on it with it.
Wait for 5-10 minutes for the solution to soak in and loosen the haze. You can use a nylon cloth to wipe off the area and haze afterward. Make sure to rinse the surface once you’re done.
Method 3: Commercial Cleaner
This method is for stubborn haze only. Wear gloves and a mask before you start cleaning. Otherwise, the product can harm your health.
Step 1: Choose the Right Cleaner
Pick a cleaner depending on your grout and tile type. If you have epoxy grout, you must get a stronger cleaner. Otherwise, you don’t have to use any powerful product.
If we look at tile types now, slate and stone can’t be cleaned with powerful cleaners. You have to instead pick a cleaner that’s formulated to clean that.
Here are some of the cleaners to remove the haze-
Pick the correct cleaner and start the removal process!
Step 2: Mix & Apply
It’s always a better idea to mix the product with equal amounts of water. This way the chances of you harming the tile gets minimized.
Once the mixture is done, pour it into your spray bottle. Apply it on the haze and wait for 5-7 minutes.
Step 3: Wipe Off & Rinse the Area
Wipe the Haze off with a nylon cloth or scrub pad. Wipe the excess part of the cleaner with your mop and rinse that area.
Remember to dry the area once you’re done. This way your tiles and grout will be safe from germs and dirt. Otherwise, the grout can become blotchy. As a result, you might have to fix the blotchy grout yourself.
Question: Will grout haze fade on its own?
Answer: No, grout haze won’t leave on its own. The grout residue will remain on the surface. They become more difficult to get rid of with time. You will have to try to get it removed.
Question: How long may grout haze be left on tile?
Answer: To eliminate the haze, you should not wait more than three hours after the grout has been cured. Use a clean sponge to dampen the contaminated surface if you are trying to remove it within 3 hours. But do let the grout time harden.
Question: How to prevent grout haze beforehand?
Answer: Many manufacturers recommend using a “grout release,”. This is a preventative coating applied to a tiled surface. It can stop grout haze from remaining on the tile.
That’s all there is to it on how to remove grout haze. Grout haze is a typical and normal occurrence.
Don’t worry, and apply the method described above to get rid of it. But if you feel like you can’t do it, call an expert to help you out.