Skip to Content

How to Remove Hairspray From Tile Floor [A Complete Guideline]

Have you messed up your tiles with hairspray waste? Well, this might look like an absolute disaster. Tiles will get stained from hairspray. It’s not noticeable initially. But with time it gets more prominent and becomes a mess. 

How to remove hairspray from the tile floor?

To remove hairspray from the tile floor you need to get rid of any visible dirt from the floor. Then first, mix water with some light detergent. Soak a sponge in the mixture. Put your gloves on. Then scrub it off and wipe it off with a clean cloth. Finish it off by cleaning it with regular water.

Still confused? It’s just a brief but the topic needs more explanation. Continue reading to learn more.

Let’s get to the exciting part without further ado!

Why Is It So Important to Remove Hairspray From Tiles?

You might be wondering why it’s so important to get it off the floor. There are several purposes behind cleaning it. 

Hairspray is a type of material that is noticeable and sticky. Again, when hairspray accumulates on ceramic tile, it leaves isolated glossy patches. 

These are also plainly seen and detract from the tile’s overall beauty. It is necessary to clean hairspray from the tiles.

If you’ve been searching for some handpicked hairsprays, give it a check below:

Product 2

The mentioned products are highly effective yet affordable.

How to Clean Hairspray From Concrete Tile Floors? 

If you have tile flooring like using hairspray, you may find it tough to clean up. Fortunately, there are a few inexpensive and simple ways to get rid of hairspray. Here the process is kind of similar to cleaning fake stainless steel.

Things You’ll Require

  • Mop/sponge
  • Shaving cream
  • Gloves made of rubber
  • Alcohol rubbing
  • Detergent (Light)
  • Shampoo
  • Dish Soap

Now that you know what you are going to need, let’s start with the process.

Step 1

Soak a sponge in water and wring away the excess. Apply a dab of shaving cream on the sponge before rubbing it over the tile floor. Cover the regions that have been impacted by the hairspray with circular movements. 

When you’re done, clean up the remaining water with a mop.

Step 2

Put on rubber gloves, then damp down and scrub with detergent. Scrub the afflicted areas well before rinsing with water. You can clean shower tiles without scrubbing but not this one.

Step 3

Clean the tile floor with a mop and a drop of rubbing alcohol. It’s time to dry out the mop and clean the floor with regular water. Do it if you see the floor is getting less sticky and cleaner.

Step 4

Add a few drops of shampoo to a bucket of warm water. Scrub the floor using a sponge dipped in the solution. Rinse the whole floor with hot water and dry with a napkin after the hairspray is gone.

Step 5

Scrub the damaged parts of the floor with dish soap. Allow yourself ten to fifteen minutes of resting time. Scrub with a damp sponge or mop. When you’re through, dry out the sponge and rinse it with simple water.

Step 6

Soak a sponge in water and wring off the excess. When you’re done, clean up the remaining water with a mop. Allow yourself ten to fifteen minutes of resting time.

This may not be the ideal solution if you have a ceramic tile floor. Let’s take a look at how ceramic tiles can help you achieve this.

How to Clean Hairspray from Ceramic Tile Floors?

There’s no need to be concerned if hairspray is leaving sparkly patches in your house. Hairspray may be simply removed from ceramic tiles using a number of tried and true ways.

First, gather a few things before starting the step-by-step process.

Things You’ll Need 

  • Fabric softener in liquid form
  • Bottle for spraying
  • a clean, soft cloth
  • Sponge
  • Eraser with microporous surface
  • Soda (baking)
  • Shampoo
  • vinegar (white)

Now let us look at the method now that we’ve acquired everything we’ll need!

Step 1

Take a spray bottle first. Then combine one portion of liquid fabric softener with two portions of water. Now shake vigorously to combine. 

Using a soft, clean cloth, wipe away the solution from the tiles.

Step 2

Rub the hairspray off the tiles with a damp microporous eraser.

Step 3

Prepare a mixture with baking soda and regular water. Apply it to the tiles using a sponge. Allow two minutes for the paste to dry on the tiles. 

Then clean it off with a clean, wet towel.

Step 4

Scrape the hairspray away with a clean wet towel and hair wash. Fill a spray bottle with white vinegar . Then carefully squirt it over the tiles evenly. To remove hairspray from the tiles, use a sponge or a soft, clean cloth.

Test it on a small section of the tile before applying each technique. Your tiles may be harmed by certain chemicals.

3 Helpful Tips

Hairspray. It’s excellent for your hair, but not so much if it stains your tile. You’ll have to clean it up as soon as possible. I’ve already mentioned the process of cleaning. 

But to help you out a little extra, here are some helpful tips for you.

Tip 1

Vinegar and citrus-based cleaners are too acidic for specific surfaces. Such as granite, natural marble, limestone, travertine counters, tile, etc. They can also ruin the finish. Acidic cleaners are okay for concrete

But ammonia-based cleaners, such as certain glass cleaning solutions, are harmful to the finish.

In a spray bottle, combine 12-ounce water with one-fourth cup of rubbing alcohol. Then a few drops of dishwashing liquid. And, your cleaner is ready.

Tip 2

Mop your vinyl flooring with a powerful vinegar and water mixture. If you want, add a tiny quantity of light dish soap. It’s another strong solution that must come in handy in removing.

Tip 3

To remove a particularly stubborn buildup, pour a tiny amount of rubbing alcohol directly on the floor. Clean up as the hairspray dissolves. 

No matter which procedure you follow. Always Mop the whole surface with plain water. 


Question: How to remove hairspray off walls?

Answer: Isopropyl or rubbing alcohol are good options. Pour a little amount onto a dampened microfiber cloth and massage it in.

Question: How to get rid of hairspray stains from laminate floors?

Answer: To do it, scrub the damaged area of the floor with a towel. You’ll require a dish cleanser and 2 cups of warm water.

Question: How to remove dried hairspray from a curling iron?

Answer: Removing dried hairspray from a curling iron isn’t too tough. Rub the metal component with rubbing alcohol and a gentle cloth to remove it.


Now that you know how to remove hairspray from the tile floor. 

When it comes to hairspray cleanup, it’s best to do it more regularly. Rather than allowing the accumulation to become excessive.

Now, go ahead and spritz away. 

Best wishes!