Skip to Content

How to Remove an Icemaker [5 Easy Steps]

This article is for informational purposes. Always seek the advice of qualified professionals.

It can be really frustrating when the ice maker is not coming to lose. Did it ever happen to you? It might be because it gets jammed. 

How to remove an icemaker?

Ice makers are not that hard to remove. First and always unplug your fridge for safety. Then unscrew and pull the ice makers to the front. The wiring of the ice maker is behind, disconnecting them by pulling on them. Remove the ice maker from the fridge. Now, unscrew the brackets to take them off. 

Each and every part of the removal has more details to it. We have detailed steps which will guide you properly. 

So why don’t you jump into the details! 

How to Remove an Icemaker?

Removing an ice maker might sound really easy. Also, following 5 steps just to remove an ice maker might sound too much. 

But here the removal process is divided into 5 parts for your ease. Other than your attention you only need a screwdriver. So let’s get started on the process. 

Step 1: Turn Off the Power and Water Also Remove the Ice Bucket

Whenever you are working with electricity, unplugging at first is the best. The ice maker has its own powering. So there is electricity flowing through the ice maker. Make sure the plug of your fridge is off the port. 

Now that you have stopped the power supply, it’s time to clear the way. Remove the ice bucket from below the ice maker. There are screws behind the ice bucket which need to be removed before.

The water intake also needs to be stopped. The water reservoir is usually located behind the fridge. Bring the fridge away from the wall and turn the water valve off. Don’t disconnect the water line if you are thinking of replacing the ice maker. 

Following tips to clean the waterline every now and then is a good decision. Bacteria can grow on the waterline over a period of time. 

Step 2: Separate the Panel Cover

Let’s work with the ice maker now. There must be a panel located on the ice maker. It needs to be removed. To remove the panel, you need to pry it open. 

You can use your fingers but there is a risk of getting pinched or hurt. Using a flat head screwdriver is the best option. Put the flat head screwdriver between the panel and twist it. This should release the panel. Set it aside while you are working. 

If you don’t have a flathead screwdriver, getting one is a wise decision. Flathead comes in handy a lot of the time. You can consider picking any of the below-listed screwdrivers:

CRAFTSMAN Flathead Screwdriver SetHas a satin-nickel finish, extremely durable
Klein Tools Keystone ScrewdriverPerfect for demanding uses 

These screwdrivers have a great grip. Also, they are rust resistant, so rust will not catch on them. 

Step 3: Remove the Icemaker

The ice maker is attached to the fridge. It is usually attached with screws or pins. If there are no screws, it is most probably attached with pins. 

If so, pressing on the pins will release the icemaker from the fridge. Then you just need to slide the ice maker which brings the wires out. 

If the ice maker isn’t attached with pins, you need a screwdriver for the removal. There will be multiple screws both on top and bottom. Remove the screws that will release the ice maker and you can work on the wiring. 

The screws might be hex screws, and in that case, using a hex screwdriver is the best. But removing hex screws without a hex screwdriver is also possible. 

Step 4: Detach the Wires

The wires sit behind the ice maker. To detach the wires, bring the ice maker forward. The connection must be under a cap. You need to get a grasp on the wire cap and put pressure to release it. 

Also, not all fridges are the same. There might be multiple locks on one cap. If so, remove all the locks by pressing them and pulling them. Don’t pull the ice maker when the wires are connected.

There will be pins that are located under the cap. The cap protects from any water or freezing on the pins. Pull the icemaker out of the fridge when the wires are disconnected. 

Step 5: Unscrew the Brackets

Now that the wires are disconnected and the ice maker is removed. You can remove the brackets. The brackets are going to be attached with screws, so remove all of them.

If you are not planning to replace the brackets, put the screws back in. Empty holes in your freezer might cause mold intake. The holes also might collect moisture and cause icing. 

Cleaning the ice maker and the brackets at this point is wise. Icemakers can house a lot of bacterias. 

The icing on the holes will restrict the re-installation of an ice maker. It might cause you problems in the future.

Things to be Careful About When Removing Ice Maker

The removal process of the ice maker is really easy and safe if you follow the steps. But there are chances of damaging yourself or your fridge. 

Removing the ice makers when there is ice might be tough. The ice or the cold temperature can make the screws or the hinge seem stuck. Turn the freezer off for several hours before the removal. This will let the ice melt and screws loose. 

If you are connecting the ice maker with the washer line, be careful while drilling on the fridge. Drilling in the wrong place can damage your fridge. 

If you try to take the ice maker off when it’s cold, you might damage your freezer. The walls of your freezer are multi-layer. In the first layer, you see a plastic protective layer. If you pull on the ice maker when it’s stuck, the layer might come off.

Fixing the plastic layer might be really difficult. Any leakage will cause the performance of your freezer to be poor. So be careful when you are removing the ice maker. 

FAQs

Questions: Can I attach any new ice maker to my fridge?

Answers: The size of the ice maker varies. Look for if your fridge can support a bigger or a smaller ice maker. 

Question: Why do ice makers need a separate power supply?

Answer: The ice maker needs a separate power supply to make ice quickly. It’s like having a freezer within a freezer. 

Question: Can I purchase an ice maker separately?

Answer: There are ice makers which are sold separately. Ice makers might not last as long as your fridge does. Replacing one is more cost-saving. 

Endnote

That’s all the things you need know to about how to remove icemaker. It’s not that frustrating when you follow all the steps.

Be careful when you are working with electronics. Always unplug the appliances first.

Good luck with your fridge!