How to Remove A Jacuzzi Tub? [In 5 Easy Steps]

We may get commissions for purchases made through links in this post.

Thinking of upgrading your washroom, so want to install a new jacuzzi tub with more features? You’ll have to get rid of the old one first. But that can be hectic and could cost you more. 

Doing this by yourself could reduce the costs though. But you may not know how to remove a jacuzzi tub. And that’s why we’re here to help you. 

How to remove a jacuzzi tub?

The work starts with using the necessary tools and assembling them. Using safety tools is also crucial to avoid injuries. Disconnect the water and electricity supply from the jacuzzi. Then start by removing other small things attached to the tub. Finally, remove the jacuzzi tub and take it out from the surroundings.

In case you are confused, it’s okay! We have explained the entire process in 5 easy steps in our article.

Give it a read to know what you’re looking for!

What Is The Cost For Removing A Jacuzzi Tub?

The cost of removing a jacuzzi tub depends on the setup and type of work you’ll do. If you do it by yourself, it will cost less than taking professional service.

When you remove it by yourself, it will cost around $200-300. A built-in jacuzzi tub will cost around $350-550 since it requires more work.

When you take help from a plumber, it will cost around $500-1000 depending on their rating. The better their rating, the more they will charge. 

And that’s why we suggest doing it yourself. It’s not that difficult to carry out.

How To Remove A Jacuzzi Tub? 5 Steps To Follow

In most homes, jacuzzi tubs are permanently installed in the bathroom. But, a jacuzzi tub can be removed in a similar way it has been installed. 

We’ve put together a guideline for you. By following the instructions we’ve laid down, you’ll be OK.

Tools Required

Before you start working on the process, gather all the tools and safety gear you need. Here are things you’d need for this-

  • Hammer
  • Jigsaw
  • Super bar
  • Channel-lock plier
  • Reciprocating saw
  • Screwdriver
  • Rags
  • Duct tape
  • Sharp knife
  • Dumpster
  • Adjustable wrench
  • Respirator
  • Safety Goggles
  • Safety Gloves

Got all the tools at your hand? Great, let’s get started then!

Step 1 of 5: Take Necessary Preparations

Before you begin, You should be aware that different tools are used for different purposes. The terms “safety equipment” and “plumbing tools” are not interchangeable.

Safety comes first, so wear all the necessary equipment for protection. Organize the plumbing tools sequentially so that you can use them by maintaining chronological order.

Read the instructional manual of how you have installed the jacuzzi tub. It is true that the installation and the removal process will be the same but in reverse order.

Step 2 of 5: Take Safety Measures

Before the removal process begins, we recommend you wear personal protective equipment (PPE). Safety should be the highest priority to carry out the task unharmed.

Use safety goggles to protect your eyes from a variety of materials. You can find them in the nearest sanitary shop. To protect the hands from injuries, wear gloves. Sharp and heavy objects are risky and can injure you in a matter of seconds.

Finally, to protect you from poisonous or hazardous substances, use a respirator. The respirator has a lash belt that fits into all head sizes so you don’t have to worry about fitting.

You can purchase your respirator from these recommended products below:

Product 1
Product 2 

These are the best ones in the market. And you can use this without any worries!

Step 3 of 5: Disconnect Electricity and Water Supply

The main water pump will be shut off by a switch which is found inside the house. All the water from the tub, faucets, and water supply pipes must be drained before removal.

Turn off the jets and any other electrical connections to the jacuzzi tub. Unhook all the electrical wires and cables safely using a screwdriver. Make sure the main electric panel is grounded because serious accidents might occur if it’s not installed.

Step 4 of 5: Remove Small Things Attached to The Jacuzzi

Before you remove the jacuzzi tub, small things need to be removed. You surely don’t want other things in your washroom damaged right?

Remove the shower, shower curtains, and its rod at first. The channel lock pliers can be used for this. Now remove the access panel which is usually at the side of the tub. This is normally done by a super bar.

Remove faucets and other fixtures on the jacuzzi tub with the help of a screwdriver. Make sure to put it back properly after you’re done. Otherwise, your bathtub faucet may make a loud noise.

Finally, all the plumbing lines must be detached using an adjustable wrench.

Step 5 of 5: Remove The Tub

Removing the tub might sound easy but it is actually difficult. You have to know how the washroom was designed and figure out the best possible ways to remove it.

Start by hitting the concrete or tile corners. Then breaking them with the help of a hammer and reciprocating saw. Then cut the surroundings of the jacuzzi tub out with the help of a sharp knife or a jigsaw.  This process can become a lot more difficult if you have a cement board under the tub

Now, carefully lift the jacuzzi tub out since it is very heavy. It is recommended to take assistance when lifting the jacuzzi tub out of the washroom.

Make sure you wear gloves in the entire process to avoid injuring your hands. The person you are taking help from should also wear gloves and other safety measures. After taking it out of the surroundings, take it out of the washroom. 

And that’s it, your jacuzzi tub can be removed with just these 5 simple steps. We hope we were of assistance to you.

FAQs

Question: How hard is it to remove a jacuzzi tub?

Answer: Jacuzzi tubs are difficult to remove as they are heavy. You don’t have to hire a plumber to do it. You can do it yourself if you can manage to get help from someone.

Question: Do you need an electrician to disconnect a jacuzzi tub?

Answer: It is risky and dangerous if you disconnect a jacuzzi tub incorrectly. We recommend you call an electrician to take care of it if you are not sure. You don’t need an electrician if you have experience disconnecting a jacuzzi tub.

Question: Can you replace a regular tub with a jacuzzi tub?

Answer: Sometimes jacuzzi tubs also adjust in the space of a regular tub so they can be a replacement. Hence, measure the space when removing the regular tub and look for similar-sized jacuzzi tubs. In this way, the installation will get easier.

Conclusion

Now that you know how to remove a jacuzzi tub, it’s time to get into action. Our detailed breakdown will surely help you a lot while working.

Removing jacuzzi tubs is common nowadays since people are replacing them with new tubs. Hence use this guide when doing it alone instead of professional service.

See you next time, bye!

Scott Kelly