Skip to Content

How to Repair Hardwood Floors After Removing Carpet [4-Step Solution]

Removing carpets from hardwood might leave some unwanted residue. But, repairing hardwood is always better than replacing it in such scenarios. It is also cost-friendly. But hey! If you are worried about how to do it, I am here to help.

How to repair hardwood floors after removing carpet?

To repair the hardwood floor, start by gently peeling off the carpet.. Now give your hardwood floors a thorough cleaning. Carpet glue, mold, and pad stains must all be removed. Only household detergents can be used to clean some flooring. Others require industrial detergents due to the intensity of the stains.

I have made a more elaborate discussion on this topic.

Come let’s check it out together, shall we?

4 Major Reasons that Causes the Damage

Hardwood floors are a classic vintage touch to the household. But, during the 80s’, carpets became the sign of class and honor.

But recently, hardwood made a comeback. And so, people are ripping off their old carpets to redefine their old hardwood floor. Well, there are consequences too.

Before starting the repairing process, you have to know what causes the damage in the first place. Well, let me tell you:

Reason 1: You Damaged Your Floor with Carpets

Usually, carpets are glued strongly with the floor. And in the case of hardwood, they are more likely to sit a little harder on it.

So, if you carelessly rip open the carpet, you’ll heavily damage your floor. It’s possible to restore them but everything would be of huge expense. But, it’s important for your personal safety.

So, carefully remove the carpet from the hardwood floor. Or you’ll be left with damaged floors needing repair. In most cases, you’ll have to replace the floors.

Reason 2: Floor Cracked up Under the Carpet

Now if a floor has been under the skirt for too long, it will get too old to function. Hence, all cracks and crooks will occur.

A cracked floor is one of the major causes of accidents. So, if you see any cracks on your floor, make sure to fix them immediately.

You can use cement to cover up those cracks and sand them later. It will hide those gnarly scars and smooth them out prominently.

Reason 3: Moldy Floors

When your floor is covered by carpets for a long time, mold develops. Molding is common in such scenarios.

Removal of molds from hardwood floors is slightly different from removal of mold from basement walls. So, do not use the same products just because one is handy.

In such cases, scrub off the affected area. Use warm water, liquid soap, and a soft-bristled brush for it. 

Reason 4: Your Floor Lost Its Shine Over the Years

Now this one is quite obvious after years of heavy use. We can’t expect something to work out just the same if it was suppressed now, can we?

But this scenario can be reversed by polishing the floor with proper equipment. There is a lot of polishing equipment that is suitable for your floor. Here’s some of my favorites:

Product 1
Product 2

This process of restorations is better than getting new floorboards anyway. It’s not like I am against getting new hardwoods. But, I am afraid it’s not affordable for most of us. 

As in, the cost of installing hardwood is unimaginably high. So, try to repair it instead of getting new ones.

4 Steps to Repair Hardwood Floors After Removing Carpet

If you can relate to everything from the above, then keep reading. Even though restoration of the floor is a kinda messy process, it’s very worth it.

The end result should be a glossy, mirror effect floor. Anything less than that means you have done something wrong. Let’s start now, shall we:

Step 1: Removing Debris

After you remove the carpet, some dirty and dusty residue is left behind. This could potentially ruin your repair process. This is why cleaning debris is much needed.

Tools Required

  • Broom 
  • Vacuum

Now, let’s start!


After removing the carpet, gently sweep every dirt and dust. This way, every carpet residue would come off. 

Side by side, every wooden chip, and spider net should be wiped off the floor. This process ensures no chunks interrupt your hope of smooth floors.

Step 2: Washing the Hardwood Floor

Next would be washing the hardwood floor. You see, just sweeping doesn’t take away all the dirt. So, mopping the floor for a squeaky clean effect.

Tools Required

  • Water
  • Mop 
  • Soap
  • Cloth wipes

Well, here we go!


Mix liquid soap with water then use the mop to wipe the floor. This way, the residue of dirt would be gone from the floor.

Wood tends to absorb water and get spoiled later on.  This is why next would be drying the floor with a dry cloth wipe. This way the water residue would be gone.  

This process is important for the insurance of cleanliness. You can’t work on a floor that’s dirty. It will damage the existing floor texture.

Step 3: Smooth the Surface

This one comes if only there is uneven flooring going on. This will make sure the floor is even and leveled for further work.

Tools Required

  • Sandpaper

That’s all you need. So, let’s start.


Start by scrubbing from a corner and even out the floor. You might have to repeat Steps 1 and 2 for hygiene sake

This is not a mandatory step. But if you are going to restore your floorboards, I’d suggest going full length.

Sanding would take off any debris or uneven residue on your floor. It even cleans up the tough molds as we speak. It will smoothen the surface.

Step 4: Polish and Restore

This is the last step towards shiny floors. You need to go through this process if you want to make your floor shiny. 

Tools Required

  • Restorer 
  • High traffic floor polisher

Now, let’s begin!


In this last process, you have to polish the floor with a polishing agent. First, apply the polishing agent on the floor directly. Then with a  floor polisher spread it evenly.

Do it until the floor gives a glossy effect. Let it dry for a day for the best results.

Now, this process has to be done twice. Once for polishing and again for removing rejuvenated floor restorer.

This process completes the restoration process. Well, your hard work gets a proper name if you see a mirror effect on your floor.

Final words

Remember, there’s nothing wrong with wanting to rejuvenate your hardwood floors. But to make the process easier, start by doing the basics right.

Do not panic or get upset during the process. I’ll be glad if you have at least tried.

In case you have to remove orange Glo wax, don’t fret. That can also be done through some simple steps.


Question: Is it right to lay carpet over laminate flooring?

Answer: Yes, it is. To put a carpet over laminate flooring is easy installation and easier cleaning. Though make sure to clean carpets regularly as it might ruin laminating.

Question: Is it possible to install vinyl plank over carpet?

Answer: Yes, it is. Although, you don’t have to remove your current carpet to put your laminate or vinyl planks. If your carpet is low piled and thin, lay your floorboards directly over it.

Question: Which is better; carpet or hardwood?

Answer: In the sense of aesthetics it would be carpet. And if you are looking for hygiene than hardwood. Carpets get dirty easily and are hard to clean. But hardwoods are easier to maintain but aren’t as comfortable as carpets.


If you have made it here, I’m hoping you learned how to repair hardwood floors after removing carpet. Remember the results depend on how hard you worked with patience.

But, if you are still struggling with repair, connect with a professional. Floorboards are expensive, so let’s not ruin it any further by trying to fix it by ourselves.

Other than that, happy repairing!