Skip to Content

How To Seal Particle Board Edges: 4 Simple Steps!

This article is for informational purposes. Always seek the advice of qualified professionals.

Particle board is a waste-wood product used for your furniture. You might struggle to do your DIY projects because of the board. But sealing the particle board will give you a head start for your project. You will face difficulties when you do your projects without a sealant.

How to seal particle board edges?

Protecting yourself is our first priority. Take necessary safety precautions at first. After acquiring the gears and start measuring and cutting the particleboard, take clear acrylic sealant and start applying. Dry off the coating and you’re good to go.

Feeling puzzled? Then stay with us till the end and seal the particle board edge yourself.

Step-By-Step Guideline To Seal Particle Board Edge

Sealing a particle board will be more useful when you use it for DIY projects. Because we need the board to be durable. It also prevents getting damaged by water. Let’s not waste any more time and jump right into the steps. The process is closely related to sealing a particle board itself.

First, you need to gather some material. 

Grab these items and get back to work!

Materials Needed 

Before you start sealing you need these to proceed. If any of it is not available you can just buy it from your nearest home accessories shop:

  • Mask
  • Safety Goggles
  • Sealant
  • Marker and Paintbrush
  • Gloves
  • Saw 
  • Knife

You have acquired everything on the list? Now let’s seal the particle boards.

Step 1 of 4: Safety Precautions 

The first step is to ensure your safety. Particleboard is manufactured from particles of wood glued together. When you cut the board it will shoot flakes, wafers, and strands. Wear safety goggles and a face mask to protect yourself from these splinters. 

Taking these precautions will save you from any occurrence. After you’re done wearing safety goggles, masks, and hand gloves only then proceed to the next step. 

Step 2 of 4: Measuring and Cutting

Take the measuring tape and measure out the necessary pieces of the particle. Use the marker to mark where to use the saw. You can also use masking tape on the board to have the perfect cut. Make sure to remove the masking tape after taking measurements. 

Wear your goggles to protect yourself from sawdust. Now, take the saw and start cutting the wood. You need to cut through the wood gradually. 

You can use a circular saw or a jigsaw to cut the board. Be careful to not hurt yourself during this step.

Step 3 of 4: Applying the Sealant 

You need clear acrylic sealant for this step. You will notice some open edges on the board. Take a coat of sealant. Now, start applying the coat of clear acrylic sealant.

You can start with the thinner parts and then go to the larger ones. You can choose to apply it with a paintbrush or your fingertips. 

Try not to use any kind of glue on the particleboard. Use glue if you want to attach plastic to wood

Do not keep any part of the edges dry. 

We can suggest some great sealants for you to apply. Check them out!

Product-1
Product-2

Step 4 of 4: Drying the Sealant 

Now take the knife and scratch off the extra sealant. We need an ample amount of air to make the sealant dry quickly. If you maintain a normal room temperature and ventilation system it will be enough for drying.

Don’t try to rush this part. Just take time and ensure the sealant is dry before moving on. If you see any bubbling after the sealant dries it means you haven’t put the sealant properly. Dry the particleboard just like you dry a wet wood floor

If you are concerned about the timing then you can go for “Quick Drying” Sealant. 

Does Sealing Particle Board Edge Actually Help? 

There are a few benefits you will get after you go through the process. By far people are using after putting sealant coating and there hasn’t been much complaining. This edge sealing actually increases the lifespan of the board. 

Let’s see what you will acquire after finishing all the steps.

The sealant will protect the wood from heat, snow, and rain. It makes the particle board edge waterproof.

It will make the particleboard more durable. Enhances the strength of the particleboard. Even if it’s to a degree. You don’t have to worry about it ruining as the sealant will increase usability. The sealant will remove the uneven parts of the board. 

Another plus point of sealant coating is after the project you will see how stunning your particleboard looks. Not only the looks, but sealant will also enhance the quality. 

That is all!

FAQs

Question: How to seal a crumbling particle board?

Answer: You can use a solvent-based coating on the particleboard. This exterior grade coating will soak in and glue the wood back together. You can try gluing a plastic of some sort over that area. It will prevent it from exposure to moisture. 

Question: What can I put on top of the particleboard?

Answer: Generally, people laminate the top covering of particleboard. If you don’t rough the surface of the board, the paint will stick properly. You can use a medium grade of sandpaper first. After using that, follow this with a fine grade of sandpaper. After everything use an oil-based primer to cover it. 

Question: Is acrylic sealer waterproof?

Answer: Acrylic sealer is usually waterproof and lasts longer. You can go for Mod Podge Clear Acrylic Sealer which is a 12 ounce can of waterproof sealer. If the coating is staying more than 3 years then you should re-apply it. 

Conclusion 

Now you know the answer to how to seal particle board edges. All you need is some tools and basic DIY skills. But if you are still puzzled, you can look for a professional to look at your particleboard.

We tried to make this guideline as straightforward and easy as we could for you. That you don’t face a tough time while following it. We hope you try it out yourself. 

Be careful and take necessary precautions throughout the project. 

Thank you for being patient and staying with us till the end!