Are you considering travertine tiles for your home? You might be confused about sealing it. You’re not sure whether to use or not to use grout beforehand.
Thinking about the process of sealing travertine before grouting?
It’s an easy enough process. You’ll have to remove the wax coating and clean the tile. Then spray water on the tile until it’s wet. Wait for the water to dry, then apply a layer of sealant. Make sure to remove excess sealant on the tile. Repeat this a second time and you’re done!
That was the jist of the entire process. If you’re having a tough time understanding this, don’t worry. We have prepared a detailed step-by-step discussion just for you.
Why Should You Seal Travertine Beforehand?
Travertines are natural stone tiles. These tiles are highly absorbent and might stain quickly. Hence if you seal the travertine tiles before grouting, it will protect the surface. But depending on the color of the tiles, it might not be constantly visible.
Moreover, applying sealant or enhancer aids in the grout release. This makes it easier to clean up the grout. After applying grout, you can touch it up a day later.
It’s important to remember that a stain on your travertine tile remains forever. For this reason, you should use appropriate stone cleaners before sealing travertine tiles.
Now, before moving on to the steps, let’s check out the types of sealers.
Choosing The Right Sealer
A few factors determine what kind of sealer you need for your travertine tile. Essentially there are three kinds of sealers in the market. We have listed their features and uses for your convenience.
You should go for a penetrating sealer if you want a smoother or a matt finish on the stones. This type of sealer helps to repel stains from spills. Moreover, you can use this for your interior and exterior work.
For textured surfaces, these kinds of sealers are the best. It leaves a glossy shine on the surface. Moreover, when this water-based sealant is applied, this leaves a residue. This protects your tiles from stains.
Decorative sealers give the finishing touch you want for your tiles. You can choose from two types of decorative sealers. Just like how you can lighten grout, these sealers can change the texture of your tiles
Natural Sealers make your stones look flawlessly natural. If you don’t want to modify the appearance of your tiles, then you can check out this sealer. This sealant is mostly used on polished stones.
On the other hand, Enhancing Sealers can potentially alter the color of your tiles. In most cases, they enhance or darken the stone. After application, it mostly gives off a wet look.
You can use more than one sealer on your travertine tiles for the added effect. But be sure to choose the right kind of sealer. Because unlike unsealed grout which can be cleaned, you won’t be able to clean travertine.
Steps-by-Step Guide to Seal Your Travertine Tile
We’ve broken down the entire procedure into four simple steps. These are pretty simple to follow. With that being said, let’s get on to the sealing process.
Step 1: Removal of Wax Coating
Most of the travertine has a protective wax coating on the surface. You can try removing it with hot water and then scraping it off. This one might be a little time-consuming. But we have another method down below.
You can easily remove it with sawdust and hot iron. Start by placing a thin layer of sawdust over the wax. Then take the hot iron and apply it on top of the sawdust.
After a while, you’ll see the wax melting away, and the sawdust absorbing it. So you won’t have to do additional cleaning.
Step 2: Clean the Travertine
Start the cleaning by using a cleanser for natural stones. You should wait for the travertine to dry. Keep in mind that all these cleaning products should have a PH-neutral balance.
Here we have prepared a list of top-shelf products that’ll work for you:
Always read the label to make sure that the cleaning product is appropriate for your travertine tiles.
Step 3: Spray Water on the Tiles
After the cleaner has dried out, You’ll have to wet the entire travertine tile with water. A plastic sprayer should come in handy for this process. Fill up the sprayer with water and spray it thoroughly over the tiles. After that, wait for the water to dry.
Step 4: Apply The Sealer
Now take the bottle sprayer again and fill it with the tile sealer. Then spray the travertine tile until it’s wet. Make sure to apply it to the entire surface of the tile.
Give it an hour or two to dry off completely. After that, with the lint-free cloth wipe the entire tile.
Step 5: Remove The Excess Amount Of Sealer
In this step, apply a second coat of sealer. Doing this will rewet the travertine tile. Now, you can remove the excess buildup of the sealer. Again, use a lint-free cloth to wipe the tiles.
This was the whole process. After you’ve properly installed your travertine, make sure to carefully go through the steps.
You should not go overboard with the sealer. The balance between the right amount and time given to dry the sealant is essential.
Question: How long should I wait after sealing?
Answer: You should wait for up to 4 hours. After that, you can walk on most travertine floors. But, the longer you allow the seal to cure, the stronger it will grow.
Question: How long does a natural stone sealer last?
Answer: It depends on the type of sealer you’ll use. Typically, the lifespan of sealers is around three to four years. But, penetrating sealers can last up to 15 years.
Question: Should I seal and then grout on the same day?
Answer: No, you can’t seal and grout on the same day. You should wait for a whole day after applying the sealer. If you don’t, then there is a good chance that the grout will stain the tiles.
We have discussed everything that you need about sealing travertine before grouting. This process is relatively easy. But you need to use the proper sealant to get the best result. We hope that we could help you understand things better.
Good luck installing the tiles!