Skip to Content

How to Set Dye in Jeans Salt: 4 Useful Steps

We all know how tough it is to find jeans with our desired color shade. So, when you get one, you surely don’t want its dye to fade away.

How to set dye in jeans salt?

Adding salt can substantially help in preserving the color of your jeans while washing. A perfect combo of detergent and salt can do magic in this regard. But maintaining proper steps is needed for the work to be done. From preparing the washing liquid to drying the clothes, it’s a systematic task.

From the small overview above, you might not get all the information. That’s why I’ve designed this article in a reader-friendly way to help you understand it better.

Have a read!

4 Steps for Setting the Dye Using Salt

Adding salt to your washing process might seem confusing to you. That’s why I have discussed how to set dye in jeans salt in 4 easy steps. The steps are as follows.

Step 1 of 4: Preparing the Washing Solution

First, you’ll have to prepare the saltwater washing solution. It works most effectively on denim jeans and other denim clothes. Saltwater is almost a tonic for denim and hence it’s largely used. 

Take a bucket and fill it with 1 gallon of cold water. Add two tablespoons of salt to the water. Mix the salt with the water properly.

If you are washing more than one pair of jeans, you can double the washing material. For example, you can use two gallons of water and four tablespoons of salt. Thus prepare the washing solution for your clothes.

Step 2 of 4: Submerging the Clothes

After you’ve prepared the washing solution, it’s time to get it in touch with your clothes. Submerge your jeans clothes fully into the bucket filled with salt mixed water.

Don’t keep it just floating on the water surface. Or else, it won’t get wet properly.

Allow your clothes to soak in the water for an hour or more. Push the clothes to make them reach the bottom of the bucket so that it’s soaked well. Otherwise, unsoaked areas won’t receive the dye setting properties from the saltwater.

Thus the saltwater solution will mix with your clothes fabrics and do the work.

Step 3 of 4: Taking the Jeans Out

After you’re done soaking the clothes in the water, take them out. Turn the jeans inside out. Also, spread out the jeans to prevent tangling just like apron untangling.

In case you’re not in a mood to spill water in your house, do this work cautiously. Carefully remove the jeans from the bucket.

Step 4 of 4: Regular Wash

Finally, you can wash your jeans following the usual methods. Choose the cold wash cycle of your washing machine. This is particularly important to remove the salt ingredients from your clothes.

Use your regular detergent for washing. Have the jeans machine or line dried before wearing.

If you’re still not sure about your detergent, you can check the ones below. I have some of the best detergent suggestions for you:

Tide PODS Liquid Laundry DetergentPowerful and remove stains effectively 
Laundry Detergent Liquid Plus Aroma BoostBrilliant cleaning performance with refreshing scent 

I hope these detergents will serve your washing purpose properly. Use them according to your needs. Also, they will remove unwanted bad smells from your clothes.

So, these were the four steps to washing your jeans with salt water to set the dye. Follow the steps properly to get the best outcomes.

How Salt Water Helps

Using the saltwater method is great, but how exactly does it help? Well, we’re here to let you know about that.

Jeans or denim clothes tend to release the excess or loose dye from the fabric. Saltwater helps to absorb this dye. Additionally, it helps the existing dye to set well on the clothes.

With time, your jeans will surely fade away by losing their dye. The saltwater method just slows down that and lengthens your denim’s lifespan. Indirectly, it can also protect other clothes from mixing with the released dye of the denim.

There are also other methods for preserving the dye of your jeans. But using this saltwater method is an easy and cheap way for doing so. For these reasons, this method is popular and commonly used.

Other Methods to Minimize Dye Bleeding

The saltwater solution isn’t the only method to reduce the dye bleeding issue of denim clothes. There are some other methods as well.

Adding vinegar also helps for preserving the dye of the denim. They are also used in removing sweat stains from pillow cover or clothes. Some artificial chemicals can be used for this purpose. But calculating the overall effectiveness, the saltwater method works fine.

Cautionary Measures

Although using the saltwater method is quite an easy task, still some caution is needed. This will help you preserve the clothes longer.

When you wash your clothes using detergent, make sure it has removed all the salt ingredients. If some sort of salt remains on the cloth surface after washing, it can cause problems. A large amount of leftover dried salt substance can reduce the lifespan of your denim.

Don’t wash off your jeans every now and then. This can potentially cause harm to your clothes.

If your hands are somehow hurt from before, saltwater can irritate your skin. In that case, using waterproof gloves might help.

Follow these cautionary steps while washing.


Question: Is it possible to seal dye in jeans?

Answer: Yes, you can do it by adding a cup of vinegar to your cold water rinse. It will help the bleeding of the dye and seal it.

Question: Can batik fabrics shrink?

Answer: Batiks usually get shrunk in the dyeing process. So, there’s a low chance of shrinkage with batik quilts.

Question: Is it safe to iron batik fabric?

Answer: Yes, it’s safe to iron batik fabric. The fabric is usually cotton and doesn’t get harmed by the iron heat.


It’s time to wrap up the discussion on how to set dye in jeans salt. I hope you were able to extract what you needed.

For greater effectiveness, you can add ¼ cup of salt additionally while washing with detergent.

That’s all for today. Have a good time washing your denim clothes!