Skip to Content

How to Set Fence Posts in A Straight Line [4-Step Guide]

This article is for informational purposes. Always seek the advice of qualified professionals.

Fence posts provide security and privacy to your property. Nevertheless, fences are also a great solution for the safety of your kids and pets as well. But the problem is to set them in a straight line.

How to set fence posts in a straight line?

Step method will be the easiest way to fence posts in a straight line. First, mark the locations using a string to count the length. Further, level and set the rails and panels. After that, attach the slats along with the rails. Finally, fill up the blank spaces with horizontal hardboards or wire mesh.

Don’t worry. This was just a sneak peek. Here, I will be discussing 4 easy steps to install fence posts in your backyard.

So, let’s get your work done!

Essential Tools

Before starting the task, you’ll be going to need some necessary tools-

  • Wooden fence posts
  • Rails and slats
  • Screws
  • Hammer
  • Hand saw

To get started, gather these needs as soon as possible!

4-Step Guideline to Set Fence Posts in A Straight Line

From my experience, I have learned several ways to set your fence posts in a straight line. If you’re planning to set fence posts all on your own, first you’ve to know the cost of building a fence. 

Amongst all, the step-method is considered as the best of all techniques. So, I will be sharing 4 easy steps to achieve a good fencing installation. 

Step 1: Set The Locations of The Posts

First, decide the space where you’ll place your straight-line fence posts. Then grab the first post and set it up with a string. Secure the stake, mark a point 4 inches from the ground. 

Drag the string to the next spot of the fence, level the string again. Now, count the space from the ground and subtract 4”. 

Further, cut off the post using a hand saw on that place which is way longer than your first post.  

If you are confused about wh, I’ve got a few brand suggestions for you-

Product 01
Product 02

I hope now you know which brand of hand-saw works best for you.

Now, you must add another extra third of the distance to the bottom of the post. It’s because posting the fences way deeper. 

Lastly, set the post level and count the length of the third stake and continue the process. 

Though, you might face some trouble if you install fencing on wet ground.

Step 2: Set Rails, Panels, And Sections

The next step is to set the rails or panels. For that, you can use a 4-inch marker on your primary post. The marker will work as a reference for the bottom corner of the first wood panel. 

When you’re preparing for the slat-and-rail fence or picket, try to attach the rails first. Connect one end of the bottom rail at the previously marked position. 

Thereafter, extend that rail to your next post. 

Leveling will help you to construct the rails horizontally. If you follow the techniques thoroughly, the top rail will be horizontal spontaneously.

Step 3: Connect The Slats

Hopefully, you’ve attached the rails successfully! You can take a small break here as you’re doing lots of muscle work. 

So, whenever you regain the energy, you can start your leftover task. 

Generally, slats are constructed vertically to the fence posts. Hence, I will suggest following the leveling technique once again. Leveling will ease the measuring task real fast. 

Well, the level is considered as a user-friendly tool to ensure the level of the slats equally. Try to level the slats in a correct way just as the rails before you attach them with screws. 

Note: If you face any trouble, don’t hesitate to call the technicians. They can guide you with their long term experience. 

Step 4: Fill up The Blank Space

You’ve reached near the finish line. Creating a barrier will complete the task. The barrier will prevent the pets from getting through your residence area unnoticeably. 

In this step, you can either use horizontal boards or wire mesh. Setting horizontal boards, attach them to the bottom rail. Then connect with one of the posts using screws. 

Whereas, you can just staple the wire mesh to the baseline of the stake. Also, you can just use welded wire fences to create a boundary.

Here’s a tip. You can even construct raised planters in your fence posts to fill up the blank spaces. It will enhance the beauty of your property and secure privacy too. 

Finally, it’s a wrap up!

FAQs 

Question: Can I set fence posts in concrete?

Answer: No! Your fence posts mustn’t be set in concrete. Wooden fence posts and concrete will be the worst combinations as a permanent solution. Rather choose another way to set the fence posts. 

Question: Are 2 feet deep enough for fence posts?

Answer: Well, the minimum depth length for fence posts is 2 feet long. The deeper the holes, the more stable fences you will get. Generally, one-third to one-half of the fence should be above ground height.

Question: How far apart should I put fence posts?

Answer:  Generally fence posts can be placed from 8 feet to 12 feet apart. But this distance may vary from place to place. For example, the high tensile fence can have a wide range of space from 15-20 feet. 

End Note

That’s all I can provide regarding how to set fence posts in a straight line. Hopefully, you’ve found this piece insightful enough to fix your requirement.

Try to maintain the pathway accordingly to achieve the desired straight-line effortlessly. 

Yet, if you face any trouble during any task, don’t hesitate to call the experts. They can guide you with some additional advice.

Take care!