How to sharpen rage broadheads

Everything You Need to Know on How to Sharpen Rage Broadheads

We may get commissions for purchases made through links in this post.

Are the broadheads that you’ve been using until now sharp enough? Or you’ve purchased new broadheads but they aren’t sharp enough. 

Rage broadheads aren’t something that you should sharp right after purchasing. However, if you manage to dull them out after using it for a long time, then you need to sharpen them. 

On the other hand, it’s not always that the new broadheads would be sharp enough. Remember, it depends on you to keep them sharp, not your manufacturers. 

So, how to sharpen rage broadheads? 

Don’t worry, we’ve got your back. It’s not that hard. In fact, it'll surprise you how easily you can sharpen them after reading this article.

We’ve even compiled a Q&A session in the end, to help you get through most of your confusion without a sweat. 

So, let’s jump in. 

How to Sharpen Rage Broadheads? 

The last thing you’ll want is hitting your prey but failing to kill it because of not having sharp broadheads. Turns out, to be a good hunter, you’ll need sharp broadheads. 

However, these things don’t always stay sharp after using it for a long time. By now, you should know that sometimes even the new ones don’t come sharp right out of the box. 

So, how do you sharpen tools like them? 

Don’t fret. Relax. We’ve compiled a step-step process. Let’s look at how you can sharpen them: 

Tools

You don’t need any fancy tools to do the job. Moreover, they don’t cost much and you can buy them on the internet. Let’s look at the tools: 

1. Manage a Flat Surface

Firstly, before you even start, make sure that the broadheads are at a flat surface. Moreover, keep the arrow away so that you don’t cut your hands. 

2. Choose Sharpener

After you put the broadhead on a flat surface, it’s time to take out your broadhead sharpener. 

However, make sure they have a guard for your hand and thumb so that you don’t cut yourself. Also, keep a broadhead wrench to keep them tight after you’re done sharpening. 

3. Find the Correct Angle for Blades

Clamp the blade in the jaws of the sharpener. Along with that, color the blades with a marker and stroke it against a stone. At this time, check the level at which it removes the ink. That’s the angle for the blades. 

It’s essential that you put the blades at the correct angle to sharpen them quickly. However, make sure the chosen angle doesn’t exceed more than 28 degrees. 

4. Start Sharpening the Blades

Firstly, start sharpening the blades by putting them in the sharpener. Then stroke them by putting them at the selected angle. Furthermore, you can use a sharpening stone too to give refined edges to the blades. 

After you’re done with the stones and sharpener, use a medium grit paper and start stroking on the blades. 

5. Don’t Over Sharpen

When sharpening the broadheads, never sharp them too much. If the broadheads are too sharp, then the edge will fold on its own. 

Also, don’t use any oil on the blades. If any particles are stuck on the blades, use saliva to remove them. It’ll still give the shine to your blades. 

6. Work Well on Edges

The sharp edges will work great at killing your prey for you. Hence, you need to work on them even more. 

A strap of leather works as polished steel. Not only this, but leather can also remove any burrs causing your edges to become polished and sharp. That’s why leather is mainly used to give finishing to the edges. 

7. Test on Something

After you’re done, don’t assume that it’s sharp enough. You need to test it on something to be sure. Hence, take a rubber band and put it through the broadhead. 

If the broadhead manages to cut it off without a problem, then you can assume that it’s ready for use. 

Replacing vs. Sharpening of Broadheads

In case you might be asking yourself whether you should replace them or sharpen them. Let me tell you something, 

Why It’s Better to Replace Them

Sometimes, replacing a broadhead is better than sharpening them. Let’s look at why you should replace them: 

  • If you’re not confident in sharpening the blades yourself, then you can get them replaced. 
  • Replacement blades don’t even cost that much. 
  • The manufacturers sharpen the replacement blades and they’re sharp enough to do the job. 

Why It’s Better to Sharpen Them

You can sharpen your dull blades rather than replacing them. Let’s look at the reasons: 

  • Sometimes replacement blades don’t have that much sharpness, to begin with.
  • There’s no guarantee that your manufacturer will always provide sharp blades to you. 
  • If you can sharpen them, then it’s better not to replace them.

Verdict

So, what should you do

It depends on you. Getting blades replaced is a good option. But if you want to rely on yourself to do the job, go for the sharpening option. 

At the end of the day, you’re responsible for your blades and for your hunting. 

Why It’s Important to Have Sharp Broadheads

Remember, you can only kill what you can cut. Even if you manage to shoot the prey, not ensuring a perfect kill will only cause a failure. 

Let’s look at some of the reasons why it’s effective to have sharp broadheads: 

  • Dull broadheads won’t go through the tissues easily. As a result, your animal won’t die out of bleeding. 
  • It’s necessary for the animals to bleed because they’ll give a trail from their blood. Also, they'll die a humane death without much trauma. 
  • Sharp broadheads need less force as they cut easily. So, it’ll spare your efforts as well. 

FAQs

1. How sharp should be the Rage Broadheads? 

Ans. The Rage Broadheads need to be razor-sharp and should cut through the tissues of the animals. 

2. What’s the correct angle to sharpen your broadheads? 

Ans. Anywhere from 24-28 degrees is the best angle. 

Conclusion

Hopefully, this article will clear out your question on how to sharpen a rage broadheads

By now, you should know that the sharper your blades are, the more chance of success comes with them. 

The article will work as a complete guideline on how you can sharpen the broadheads. We’ve even answered some of your questions and whether you’ll replace or sharpen them. 

So, why don’t you try some of the methods that we’ve taught you today on your dull broadheads? 

Good Luck. Happy Hunting