The shower has become an integral part of the interior decor of any home.
What if you want to install a shower valve, but don’t know the exact height of the shower valve?
Trust me. This can be frustrating and irritating.
What is the standard shower valve height?
The standard height for the shower valve is considered something between 30 to 50 inches. The height is considered from the ground level of your shower. Plus, the shower valve distance can vary based on the type of shower you have. The valve is set a bit lower for bathtub users than a bath booth.
To find out the perfect valve height, you need more Info.
Here I am to help you! I bring in this article that can guide you in your knowledge journey.
Let’s start our journey!
The Standard Shower Valve Height
The shower valve is the control panel of the shower system that you are going to use.
The valve has to be set at such a height that people of all sorts can use it. For this, a general height is maintained between 30 and 50 inches.
Even so, this height can change based on the type of shower system you have.
For this reason, different shower systems require different valve heights.
Type 1: For Bathtubs
The height of the shower valve can be different.
If you have a traditional bathtub shower system. In this case, the height of the valve is considered to be not more than 28 inches.
This is approximately 3 feet above the floor and comparatively lower than the standard height.
Why? There are two probable reasons.
Firstly, the comfortability of using. Usually, you will lie down in the bathtub, right?
If the valve is set at a distance of more than 3 or 4 feet, you may not reach the valve while lying. You have to get up from the tub to use the valve.
This can hamper your shower time relaxation and create discomfort.
That is why the height is kept to 3 feet so that you can reach the valve without moving your body!
Another reason is that tubs come with a set of their own showers and taps.
Along with the main sower set, the valve must be connected to these taps and showers.
If not, then water won’t come out of the bathtub faucet. And you will need to add a new valve.
This can be pretty tough and costly.
Guess that is why it’s best to set the valve at a height of 28 inches. From the ground level obviously!
Type 2: Just Your Regular Bath Stall
Nowadays, standing shower booths have become more famous than luxurious bathtubs. And the shower valve has also gained a new height!
The ideal height is 48 inches from the ground level. It is approximately 4 feet high from the ground.
Compared to the height of the valve for the bathtub, this distance is 2 times greater.
The reason is pretty obvious. Unlike bathtubs, you have to take a shower standing.
You have to bend down to use the valve. If the valve is set lower height like the height of the tub spout.
Or, if the valve is set higher, you can’t reach the valve at all!
In other words, any other distance than 48 inches can result in discomfort.
Adding to this, some people use chairs to sit while showering. The distance is ideal for them to use the valve too!
Whether you are sitting or standing, set the valve at 48 inches from the ground. In the end, it is the optimal distance for a shower valve in a shower box.
There go the two types of shower systems and their shower valve height.
Before planning to put a shower valve, check which type of shower structure you have. Then select the height!
A Few Things to Consider
You know the generalized height for the shower valve. You also know the height of the shower valve based on your shower block type.
Unfortunately, it is not the end of the journey.
There are some facts that you must keep in mind while determining the height of the valve.
Always Measure from the Ground
While looking for the perfect height for the shower valve, measure from the ground.
You can get the exact height where it is comfortable to use the valve. After all, it is the ground on which you will take a shower.
Stand on the floor of the shower. See at which height it is comfortable to raise your hand. Set the mark for the shower valve there. That’s it!
Besides, you can spray more water with the valve set in the right position. Only a measurement from ground level will give you the perfect height!
Keep an Eye Out for the Codes
While setting up the valve, maintain the building codes. As you know, the different localities have different conducts for houseware.
These codes cover almost everything regarding houseware. Even the height of the valves.
Because of this, look at the codes. See what is the optimal height for the valve they have considered. And set the valve accordingly.
Truth to be
If you neglect the code, this can be quite a hassle.
Plus, maintaining the height of the code will make the valve easier to use, for all! After all, the height has been considered in the codes in such a way.
Think About All
Set the valve in such a way so that everyone can use it. Especially if the shower is meant for all the members of the family.
Not everyone is of the same height. A height that may seem comfortable for one can be tough for the other.
To avoid such inconveniences, maintain the height as optimal as possible. Look out for the height convenient for all.
When the height is good for all, you can go for setting the valve!
Watch Out for the Connections
Another important thing about connecting the valve is. See if it’s creating any problem for the pipe system of your bath block.
Just selecting a height for the valve is not the end. Check if it is even possible to connect the valve at that height.
The place you have selected to set the valve may not be the best to set it. It can mess up the pipe junctions.
This happens especially when you are up to set a valve in an old shower system.
Worse, it can mess up other shower set components. For instance, the bathtub faucet may not stop. Even though you closed it!
My call? Check out the plumbing plan of your shower. Before selecting the place to set the valve. You won’t face any connection issues afterward!
Speaking of shower heads, check this out. You can grab these shower heads listed below-
These shower heads are really cool and the trend in the market. Why don’t you give them a try?
Okay, then. These are all the tips from me regarding the height of the shower valve.
Following them can help you to avoid ergonomic burdens. At least they helped me when I was choosing the height of my shower valve.
Is it okay to use PEX for connecting shower valves?
Yes. You can use the threaded PEX with the shower valves. One thing you must remember before using the PEX. Make sure that the fittings of the PEX are strong. Once it is done, then connect the pipes with the shower valve. Use plastic brackets to connect the PEX with the shower valve.
Can shower valves leak?
Yes. Shower valves can leak. This means that the shower valve has some faults. The culprit behind this is the seal. Over time, the seal can get damaged due to the constant flow of water. The damaged seal also damages the rubber gasket of the valve. Due to such an incident, the valve leaks water.
Is there any way to fix shower valve leaks?
Yes, there is a way to repair the faulty shower valve. Remove the faceplate of the valve first. You will find a sleep inside. Remove it. Once you are done with it, get the cartridge out. Check it to find out the fault. The leakage takes place mainly for a damaged seal. Replace the seal. That’s all!
All right! Seems like we have reached the end of our journey. What’s the standard shower valve height? Hope you have your answer.
A tip for one last time. If you still have misconceptions, go to any plumbing experts out there. They surely can give you some heck of a help.
It’s my time to say goodbye then.
Enjoy a refreshing shower!