If you’re thinking of stretching a welded wire fence, you must be thinking of asking a professional. But this is a work you can do on your own to complete it too. It’s understandable that many people have no idea of the procedure.
That is why we are here to assist you!
What’s the process of stretching welded wire fence?
To weld, you must go through a few processes. But first consider 8 things before stretching the fence. Begin with planning, preparation, and taking the measurements. Further steps include marker replacements, drawing lines, placing posts, and finally executing the work.
Now, let’s not let your enthusiasm wait any longer. Observe how the procedure is carried out in the most straightforward manner possible.
8 Things To Consider When Stretching Welded Wire Fence
We require particular tools and factors that need to work in favor of wiring the fences. But as it needs welding, these need special preparation which is as follows-
IRWIN VISE-GRIP Pliers, Fencing, 10-1/4-Inch is the preferred plier. Nickel chromium steel is used to make this item. Jaws that have been machined for optimal gripping strength are preferred.
Here are some of our suggestions for pliers-
Comfort, control, and less hand strain are all provided by the anti-pinch, non-slip Pro-Touch Grips. But you must know the process of how to use these fencing pliers.
T-poles are commonly used to install welded wire fences. T-poles, on the other hand, are not all created equal. These can also be used to make fences without posts.
Currently, the tried-and-true metal level T-poles are the most popular. But if you want something more fascinating than green metal posts, you’ll get other often used solutions.
Remove your marker posts and replace them with T-posts. A hammer or a steel post driver can be used to do this task. Make sure they’re straight when you put them in.
Insulators that are between the fence and the electric line, are not required with PVC T-Poles. Pre-drill every three inches on all of your T-posts. This can also make passing the electricity through the fence easier.
Pre-drilled holes have the potential to be ideal for barbed wire, which can be electrified as well. You can also use pressure washers for fencing.
This is the primary and most important step in making sure it works.The strain will always be a flaw in any wire fence. It has to work, whether it’s made of high-resistance wire, welded wire, bulging wire, or chain link.
Maintaining proper tension on a fence line is critical to preventing it from bending or warping.
Some fences, such as high-tensile fences and chains, require greater tension than others today.
If using a welded wire fence and using wooden posts, you should protect it from bending. This can be accomplished by including a top and bottom rail. In this circumstance, a fence puller is strongly advised in the event of using T-poles. On a welded wire fence, tension can be adjusted with pliers as well.
You should select a fence with the appropriate caliber and size. This is for animals that need to be restrained or held outside of the gated area.
If you’re fencing livestock or putting up a deer fence, it’s best to put the fence within the posts. So that the nails and clips don’t have to endure the force of the animals grazing the fence. The fence is instead shoved into the post. The fence will not come free as a result of this.
It’s necessary to consider that 4 “x4” may be the most cost-effective option. A horse is considered to grab a foot or tear off a shoe in the most crucial openings. In comparison to a 2 “x4” aperture in about the same fencing width.
If you’re making dog kennels out of the fence, leave a 1 “x1” opening if there’s a chance of fighting. These measurements are quite similar to ones you’d make when calculating PEX size in your bathroom.
You can choose from a greater variety of wire fence configurations. A wider variety of price points is also available.
The more expensive the wire is, the smaller the opening volume is. The cable will be narrower as the gauge increases. The 23 gauge wire Osea is narrower than the 14 gauge wire.
The distance between the posts should not exceed 10 feet. The development of galvanizing is referred to as GAW. GAW stands for “galvanized after welding.” On the other hand, GBW refers to the development of galvanizing.
To avoid oxidation, this is the preferable option. GBW is an abbreviation for galvanized before welding. Because the welds were electro-galvanized rather than hot-dipped, rusting at the weld locations is more likely.
8 Easy Steps to Stretch Welded Wire Fence
Stretching a welded wire fence isn’t quite difficult. You can complete stretching of the welded wire fences in just 8 steps. We’ve provided the process in a detailed manner below-
Before you start any project or chore, especially one as crucial to your farm or property as security, make plans. Be sure you are well prepared.
Firstly you must prepare your plans, following which you may go on to implementation. You’ll need to think about the width, length, and height of your fence.
The first thing you should do is determine the height of your fence. The height of the fence must be at least 2 feet higher than the height of the posts. Your posts should be at least 7 feet tall if your fence will be 5 feet tall.
Measuring the space you’re working in is crucial if you want it to be a real square. Determine your starting position and label it with a post, then use the measuring tape to move to the next corner. Once you’ve marked it with a post, go around the perimeter and do the same thing at each corner.
After you’ve marked all four corners, make sure to measure diagonally as well, as all measures should be the same. Before moving on to the next stage, if necessary, reposition the poles to get the proper measurements.
Step-4: Amount of Wires
Now measure the length of your fence from one corner to the other. It’ll help you figure out how much wire fence you’ll need. After that, add the sides together to obtain the total, which will tell you how much wire you’ll need.
The wire fence is available in rolls ranging in length from 20 to 110 feet. You will want to deal with the larger rolls if you want to keep your costs cheap. However, you will notice that the smaller types are much easier to handle.
Step-5: Removing and Replacing Markers
Your marker posts will need to be removed and replaced with T-posts. It can be done with a hammer or a steel post driver. Make sure they’re straight when you put them in.
Step-6: Making a Straight Line
You need to tie ropes around each post at the top of the fences. This is to keep them in a straight line. This helps to show you if they’re all even.
Step-7: Placing Posts
Each post should be 7 to 10 feet apart from each other. Measure the distance between the first post and the corner one. Then, set the post in the ground and repeat with the remaining posts. Make sure your post is at a 90° angle. Remove the strings you used earlier if they’re all in place.
Step-8: Final Tweaks
Using baling wire or metal ties. Secure the wire’s end to the first post. Carefully unroll the wire. Then stretch it to the next post.
Stretching your field fence is no different than stretching any other type of offense. You will need to perform one easy step to extend it on uneven ground. After you’ve installed the first post, double-check that each one isn’t too far apart. You should leave a gap between the ground and the wire base. It’s quite straightforward.
All you have to do is raise the wire base slightly above ground level or install in wet grounds. Make sure you’ve measured the highest point on the uneven ground before proceeding. If you do it, you’ll be able to determine the height of your wire base above ground level.
If you ever want your yard to have a gate with the fences. You can turn your fence panel into a gate as well in just a few simple steps.
Question: What is the best way to attach chicken wire to a wood fence?
Answer: Chicken wire mesh is a fine, thin wire with a razor-sharp edge. So take extra precautions and use gloves when doing so. Use the staple gun or fencing staples to secure it to the board by running them around the edge every 6 inches.
Question: Is it better to put the fence on the inside or outside of the posts?
Answer: Ag fencing should be installed on the inside of the posts for the best results. Animals in the enclosure will brush up against the wire rather than the poles this way.
Question: Is it permissible for me to paint my side of the fence adjacent to my neighbor’s?
Answer: Your neighbor is not obligated to change a wall or fence just because you ask them to, such as raising it for privacy reasons. You can’t paint your side or make any other changes to it without their approval.
That’s all we had on stretching the welded wire fence. We hope we were able to help you out in the process of fencing. Following the guide will make it easier for you to do it.
Do take professional help if you face any difficulty.
Until then, take care. Good luck!