Skip to Content

Can You Texture Over Paint? Expert’s Opinion

So you want to update the color of your room but you’re stuck with a doubt whether it’ll be better to texture over paint. Should you add in textures over paint or just take the whole thing off? 

Styles and looks change throughout the years. Thus, the color that you gave your room 20 years ago won’t necessarily look better now. 

With that being said, can you texture over paint?

Turns out, in some cases texturing over paint causes more work rather than an easy solution. On the other hand, it works fine in other cases. 

So, what should you do now? 

Don’t worry. You’ve come to the right place. We’ll show you the tricks and tips to texture over the paint in this article. 

Not only this, but we’ve also prepared a Q&A session at the end that’ll clear out most of the confusion.

So let’s dive in.

And the next time someone asks you if they can texture over the paint. You’ll definitely know the answer to it. Good luck.

Texturing Over Paints (The Whole Process)

By now, you should know that texturing over paint is possible. However, you need to make some preparations for your surface before texturing them. 

Relax. We’ve got you covered. Before giving a new texture, you’ll need to prepare the surface. 

Why is it important to prepare the surface? 

You need to prepare it so that there is proper adhesion between two surfaces. Let’s look at how you can easily perform the processes. 

1. Use the Right Plaster

You shouldn’t apply thick plasters over paint. When thick paint dries up, it’ll show cracks on the surface. On the other hand, thick plasters might not even adhere well with other surfaces. 

Before applying texture to your surface, make sure that they’re tested on drywalls. Apart from this, you shouldn’t apply them directly to your surface. 

2. Prepare the Surface

Use sandpaper to take off any gloss from the existing surface. If the surface has a bit of shine to it, then the texture won’t grip easily. 

Also, make sure that the AC or heater in your room is turned off. Furthermore, protect your eyes and face by wearing goggles and masks. 

3. Use Primers

If you’re not sure about the surface you’re going to texture, then apply primers on them. Using a primer will allow your surface to get extra adhesion between the materials and the wall. 

If the surface is too shiny, then apply satin paint or eggshells. Flat paint absorbs the moisture from plaster. As a result, cracks will appear later. 

4. Mix Texture Compound

The paint should be thick and smooth on the surface. Add in 5 buckets of water to the compound and mix it completely. In addition to this, use water to the new compound in a 4:1 ratio.

If you decide on making a home-made texture with mud, then you can still apply it on your wall. However, make sure you dry your surfaces completely and prim them later. 

5. Use a Trowel or a Roller to Apply Texture

You can use a drywall trowel or a roller to apply the new texture to your surface. Let’s see how both can perform. 


Firstly, put your amount of plaster on the flat surface of the trowel. Next, you need to swipe the trowel against the surface to make a texture. However, make sure that you cover the thin layers first. 

After this, let the plaster dry for some time. Remember, you don’t need to cover the whole surface. After some time, touch the plaster to check. 

If the plaster seems cold, then the inner surface hasn’t dried yet. Therefore, you’ll need to wait for some time to give additional texture. 


Using a roller to give texture is beneficial at most times. However, make sure that you get the timing right in-between. 

Firstly, apply the rollers in the tray first and then use them on the surface. Make sure you fill the paint tray with the mixed compound beforehand. 

After the first application of the roller, you’ll have to give another texture over it again. This is crucial but if you get the timing right, you’ll get most of your work done effectively. 

Risks & Challenges of Texturing Over Paint

There are certain risks when texturing over paint. These risks may increase your work rather making it easy. Therefore, it’s better if you know them beforehand. 

What does this mean for you? 

If you know the challenges and risks beforehand, you’ll be able to deal with them effectively. So, let’s look at some of the risks and challenges that you might face. 

1. Water Causing the Wallpaper to ‘Bubble’

Turns out, water in the paint or in the mixed compound can cause the wallpaper to loosen up. As a result, wallpaper seems to have bubbles in it. Even that can occur from the absence of good quality tap if the paint is near your faucet. 

If the wallpapers have bubbles in it due to water, then you’ll have to take it off and start again. In my own experience, starting again will create more mess as you’ll have to take off the texture you just applied.

2. Glue Failing of the Wallpaper

When you add in new texture over paint, it adds in an extra load to the existing glue of that wallpaper. 

However, the glue wasn’t supposed to take this much load in the first place. As a result, the glue falls off with the wallpaper. 

Even if the wallpaper doesn’t fall off, there will still be bubbles and ripples. As a result, your room won’t still look pleasing. 


Can I put drywall mud over the paint stick?
Ans. No, It doesn’t stick well. However, if you use a primer, then it’ll do the trick. 

Can you texture with paint?
Ans. Yes, it’s possible to apply texture with paint. 

Is texturing over paint worth it?
Ans. Yes, if you can manage all the processes effectively.


Hopefully, by reading this article you can answer the question – can you texture over paint

To summarize, texturing over paint is possible only if you can follow some guidelines. If you’re on a budget but still you want your room to have an improved look then you can go for this option. 

The article will show you the ways to texture over paints and also the challenges that’ll come along the way.