6 Plain-Sailing Step-By-Step Guide For Tiling Uneven Floor

We may get commissions for purchases made through links in this post.

When renovating a house or retiling one, finding a smooth surface can be quite difficult. Because the floor is usually uneven. However, you need to tile it, but you don’t know-how. 

Is there any way to tile an uneven floor?

Lucky for you the answer is yes. There is a way you can tile an uneven floor. You have to first clean the floor. Then proceed with a leveling compound. This will smooth out the unevenness by filling in the gaps. After that, you need to make sure it spreads evenly. After that, you can move along with the tiling. 

This was just an itty-bitty explanation of the whole process. For more details, you have to go through all the 6 steps. So, what’s keeping you here? Follow along!

Steps You Need To Follow To Tile On Uneven Floors

Here we have listed the 6 steps you need to follow to even out your floor. After that, you can go ahead with the tiling, grouting, and other things. You can also carpet over your tile to enhance the look

But before we get to the process, let’s see the tools we’re going to need.

Tools Required

Here is the list of tools that you’ll require for the entire process:

  • Broom
  • Vacuum
  • Hammer
  • Chisel
  • Decking Tool
  • Rectangular Tray
  • Rolling Brush
  • Leveling Compound
  • Hand Trowel
  • Grinder
  • Rubber Mallet

Now, gather your tools, and let’s get started with the process of evening out the floor. 

Step 1 of 6: Checking & Cleaning The Floor

Check how much unevenness is on the floor. Lay a metal bar horizontally to measure the unevenness. However, before you do this make sure you’re wearing protective gear. Otherwise, you might hurt yourself in the process

Before we start with leveling the floor, get rid of any dirt or debris. This is because it might get in the way of the process. 

So take a broom and clean the area thoroughly. Then use a vacuum to collect the dirt and debris. After that, you can take your hammer and strike off any nooks and crannies. You can also use a chisel to break off the stubborn ones. 

After that, take your decking tool and clear off the rest. If there are any leftover paints, use paint remover to clean them. Then use the vacuum to clean off all the dust. Your floor is now ready for primer. 

Step 2 of 6: Applying Primer

After you’ve cleaned the floor, it’s time to prime it. It’s important to use a good one for this process. Because a cheap one might not work well with the self-leveling compound. 

Thus we’ve suggested some of the best ones you can use for this:

Product 1
Product 2

You can use any of this in the priming process. Moreover, you can rest assured that this product can support the pressure of the floor. 

Now, mix in the primer. You should always use the instructions given in the box to mix it. Otherwise, your primer might not hold the floor. Plus it can cause structural problems later on. Hence follow the proportion carefully. 

After that, pour the mixture onto a rectangular tray. Use a rolling brush to apply it all over the tiles. 

Step 3 of 6: Mixing The Self-leveling Compound

After applying the primer, it’s time to use a self-leveling compound to correct the unevenness. You can use a self-leveling mix to do this process. Read the instructions on the manual to combine the compound. 

You have to pour in the mixture starting from the lower part of the room. Then use a trowel to spread it out evenly. Make sure it fills in all the nooks and crannies. Check if you’ve missed a spot between your foundation wall and slab.

Moreover, you can also add an extra litre of water to help spread the mixture faster!

Step 4 of 6: Checking If The Floor is Even

After the waiting period you have to make sure if the floor is even. Check for gaps and unevenness. If there’s any, add a light layer of the compound mix. Don’t worry if the floor is wet, because you can still pour it in. 

Again wait for it to dry, after that you can proceed with mapping the 

Step 5 of 6: Mapping The Floor

It’s finally time to start mapping the area to tile it. This will help you know how many tiles to place there. 

Start by measuring the parameters. After that, according to that, cut and reshape the tiles needed. You can use a grinder to cut your tiles. After that, get ready to lay them.

You can use a marker or chalk to mark straight lines. In this way you can make sure the tiles are aligned. 

Step 7 of 7: Tiling, Grouting & Sealing

Now, it’s time to lay the tiles. You can use the type of adhesive you prefer. However, make sure to mix it well following the instructions. Then apply the mixture using a rubber mallet and place the tile. 

Follow this method to complete the entire room. After that wait for at least a day or two for the tile to dry. Then you need to start grouting. 

Carefully grout the whole place, and make sure there are no gaps or cracks. Otherwise, water might seep through and get in. 

And finally, to protect your new tiled floor, you could seal the tiles. Ensuring it shines for a long time. 

There you go, this is how you can renovate an old room by tiling an uneven floor. 

FAQs

Question: How do you level tile when installing?

Answer: To do that, make sure that the surface is as flat as possible. But if you want to take it a step further, use a suction pump. This will keep the tile flat. Plus it will add even pressure to the tile keeping it extra flat and still. 

Question: Should you wet tiles before laying?

Answer: If you are thinking of soaking the tile before placing it, then it’s not necessary. You can just splash it with some water and it’s good to go. You can use rags or sponges to wet the surface of the tile as well.

Question: How thick should floor tile adhesive be?

Answer: Most of the adhesives are cement-based and sit around 3mm to 12mm. This is a standard measure. If you have bigger tiles with a larger area, you should go with the highest thickness. For the smaller one you can go with the thin one. 

Conclusion 

So these were all the steps you have to follow when tiling uneven floors. Carefully follow the guide to have yourself an even tiled floor. 

If you’re having trouble with the installation, call a professional

Have a good one!

Melissa Hawkins