Grout is one of the key materials when it comes to connecting tiles. However, if you don’t put your grout properly, it’ll be a hassle. The outcome would look uneven and the mixture would lose some rigidity. Thus, making it susceptible to water damage in the long run.
You might ask yourself: can I touch up grout the next day?
The short answer is, yes! However, you have to make sure the follow-up mixture is of the same consistency as the first. Also, if it dries too much, adding more grout will make everything worse. So, you need to be careful throughout the process!
With that being said, let’s discuss the technical aspects of grout. Find out how to add grout over old grout!
How Does Grout Work?
Understanding how grout works is key to fixing any problems with it. Grout is a powder made of cement, water dispensing chemicals, plasticizers, and color pigments. The mixture is mixed with water and then applied to your wall.
The material in the grout is used to seal precast concrete. It’s commonly used to connect household fillings like tiles. Since the mixture is water-resistant, it’s most common in places like bathrooms and kitchens.
This mixture is great to hold your tiles well, it needs to be taken care of as well. Grout can get dirty and be home to mold and mildew. So, you have to take care of your bathroom walls regularly.
Grout is resistant to water. So, if you add a new, wet mix on top of dry grout, you can damage it for the worst.
Can I Touch Up Grout The Next Day?
Suppose you applied grout to a project and let it dry. On the next day, you notice some holes and patches on your grout. So, the easiest option should be to add some grout on top of it right?
Although it sounds simple, there’s actually a lot of technicalities involved. If you have small pinholes, scratches, or small low spots, you can add some grout. However, in that case, the grout should still be somewhat wet.
One thing you need to keep in mind is consistency. Your new grout should be of the same consistency as the old ones. If the new mixture is too wet, it will ruin the consistency. Thus, making your old grout disintegrate.
If the new mixture is too thick, it won’t set well. The new, heavier mixture might outweigh the older one, breaking it down. If you’re using colored grout, it might change the shade. This can make your entire setup look awkward.
You’ve to be very careful while adding extra grout. You can add caulk over sealed grout in such situations to save yourself from the hassle.
How to Retouch Grout The Next Day?
If you’ve damaged cracked grout, add new grout after removing the old bits.
Take a bamboo skewer or something sharp, and drag the tip along the cracked parts. Loosen up the grout and vacuum it out. You can use a vacuum cleaner with a hose attachment. Make sure to remove every last bit of grout from the wall.
After that, apply your grout mixture with a brush. Gently apply the grout on top of where you removed it. Apply evenly and prevent adding too much. Apply in multiple directions to prevent any air pockets from forming.
If you’re wondering which brush will be the best in this case, check our recommendations:
These are some of the best brushes for applying grout!
Once you’ve applied the grout, let it set. You can wipe the tiles gently with a sponge if anything falls on your grout. Once the grout sets, you’re good to go!
Why Can’t You Add New Grout Over Old Grout?
Adding old grout over new grout might not seem like a big deal. However, this could cause a lot of problems in the long run. These include-
Losing Structural Integrity
Adding new grout over old grout is like putting a band-aid over a broken bone. This doesn’t work as a solution, rather, causes your grout to go bad.
This makes your shower susceptible to water damage. If you add grout over any holes in your tiles, the grout will dry separately. Thus, it won’t mix well. And eventually, the grout will fall off, taking you back to square one.
Losing Colour and Viscosity
The new layer will be thinner, so it will discolor the old grout, making it look ugly. Also, if you use clear grout over dark ones, it’s going to make the broken old grout visible.
If you add too much grout, it can make certain parts darker than the rest. Then, you have to lighten the dark grout to normal again. Thus, going through another labor-intensive process.
With that, we’ve discussed everything regarding new and old grout. We hope you find this article helpful!
Question: How to re-add grout over old grout?
Answer: The best way to add new grout is by removing the old grout. Remove the old grout with a saw and clean the entire place. Afterward, add the new grout and let it set. Although it’s a bit time-consuming, it’s the safest way.
Question: Can you wipe off grout the next day?
Answer: You can choose to wipe off grout the next day but it’s not recommended. Rather wait for the grout to set and remove it normally. In that way, you won’t end up with uneven grout on your next try.
Question: Why does dry grout crack?
Answer: The reason behind that is water. Water acts as a binding agent that puts everything together. When you add too much or too little water, the structural integrity isn’t maintained. Causing the grout to crack.
Grout is a must-have in most kitchens and bathrooms for its water-resistant features. However, just like anything else, you need to be careful with it. If your grout isn’t set, it’ll only make you suffer in the long run.
So, if you’re wondering: can I touch up grout the next day?
Yes, you can! But you have to be careful about it to prevent problems.
We hope you find this article helpful!