Skip to Content

No Hot Water In Kitchen Sink: 4 Reasons With Solutions

Having access to hot water is critical for a variety of household tasks. Doing the dishes, cleaning, and washing your hands are included. If your faucet isn’t displacing hot water, you may be in for a huge problem.

Why is there no hot water in the kitchen sink?

There are 4 main reasons why your kitchen sink lacks hot water. The most typical causes are sputtering in the water supply or difficulties with the water heater. Another possibility is that there’s a blockage in the faucet. Furthermore, an airlock can also stop hot water from coming out. 

Knowing more will help you fix the hot water issue in the kitchen sink properly. That’s why we listed each reason and its fix.

As such, we hope you will continue to visit!

Troubleshooting No Hot Water in Kitchen Sink

The water heater and sink may be blocked if hot water doesn’t come out. It happens on your kitchen faucet when you turn it on. For example, a clogged valve or a build-up of debris in the plumbing could be the reason.

Ensure to start by eliminating the obvious possibilities for a problem. Check the water valves under the sink to make sure the hot water is entirely switched on.

No Hot Water In Kitchen Sink: 4 Reasons With Solutions 1

If you switch on the hot water valve and no hot water comes out, check other faucets. Focus if they are getting hot water. There could be a blockage in the faucet. In that case, the problem is with the faucet. It can also be the piping leading up to it.

This is just a summary. We’ve explained the possible reasons below with their solution-

Reason 1:  Corrosion or Rust

No Hot Water In Kitchen Sink: 4 Reasons With Solutions 2

Brittleness occurs as a result of metal corroding (or rusting). You also need to be sincere about corrosion because it’s unhealthy for you.

The metal parts of the water heater will be weaker and more prone to developing leaks. It’ll happen if they become corroded. Be sure to check the water heater first before expanding your search. You should be on the lookout for any rust or corrosion that has built up over time.


If rust or corrosion has caused a water leak, it’ll most likely be apparent. If there is a leak, it’s unlikely that the unit can be repaired. The only alternative is that you’ll have to make a brand-new purchase. 

To help you, we tried mentioning some good-quality water heaters:


You can check these products to solve your problems permanently.

Reason 2: Failure of the Heating Elements

No Hot Water In Kitchen Sink: 4 Reasons With Solutions 3

If your kitchen sink doesn’t have hot water, heating elements may have failed. To see if this is happening, turn off the water and electricity to the heater. Remove the heating elements according to the manufacturer’s instructions afterward.


Rust, corrosion, and other faults should be looked for in the heating elements before use. They may be unable to perform as intended if these conditions exist. 

Replace your heater’s heating components if they appear damaged. This should get hot water flowing in the kitchen sink. 

Be sure to hand this task over to a professional. Because if you didn’t know, your water heater can explode if not handled properly.

Reason 3: Problems with the Cartridges

No Hot Water In Kitchen Sink: 4 Reasons With Solutions 4

A cartridge controls the flow of hot and cold water that comes out of a faucet. Your faucet’s cartridge controls how much water flows through it. A hollow metal or plastic cartridge seals against the spout of the faucet body. 

Water is mixed and controlled by how the cartridge’s perforations line with the stem. Drips frequently indicate a new cartridge.

This element is positioned inside the faucet and depends on how you turn the faucet. For the most part, the cartridge is located inside the faucet.

In the long run, the cartridge in the faucet will become clogged with debris. It’ll happen because of the accumulation over time. Hot water won’t come from the faucet if the obstruction grows. Because the water cannot flow through it.


Before doing any tests or repairs on your kitchen faucet, switch off the water supply. Also, the water controls under your sink. You can turn them off simply by rotating in the opposite direction.

Afterward, check to see if your faucet is screwed down. Also, check if it has an Allen head cap on it. It may be difficult to get rid of it.

But do not be worried! We intend to assist you. 

Use needle-nose pliers or regular pliers to remove the cartilage. Get rid of any visible mineral build-up from the cartridge. Because high mineral densities in water are despised by most people. It’s also quite bad for your health. 

Water softeners are crucial for the general health of your property. That is why you should have one installed. You can use a water softener before or after your pressure tank to avoid this problem. 

Anyhow, if there is mineral build-up, you must get rid of it. Pour white vinegar over the cartridge and let it sit overnight. 

After you’ve cleaned the cartridge to the best of your ability, run it underwater. It’ll flush out any lingering gunk. 

Reassemble your sink faucet and restart the water supply under the sink. You also need to turn the valves to the on position.

Reason 4: Blockage in the Pipeline

No Hot Water In Kitchen Sink: 4 Reasons With Solutions 5

An obstruction in the water lines may be preventing hot water. Like the mineral build-up in the cartridge, it starts in your kitchen sink. See if there is an obstruction in the waterline by doing the following procedure-

Turn off the cold water in the sink by turning the knob. Unscrew the water heater’s cartridge and turn it to the on position afterward.

Once the faucet has been turned on, no hot water should be coming out of it. There may be some obstruction in the kitchen faucet’s main body.


Removing the blockage is the solution here. To stop the hot water from flowing, turn off the valve under the sink. Disable the hot water supply line at this point and turn off your faucet. 

Submerge the hot water hookup in a bucket. The cold water supply should be turned on now. To prevent the faucet from running, simply put your finger under the fixture and press down. 

The cold water should be turned on after the fixture has been plugged with a blockage material. As a result, hot water should start flowing through the intake.

By the way, you also need to keep the size of the water heater supply line in mind. It’ll help you to go through the fixing procedure.

The water moves through the hot water inlet. It’ll remove whatever’s clogging the faucet with brute force. Reassemble your kitchen sink when the blockage has been cleared up. Hopefully, the hot water has returned to normal flow.

These were all the reasons behind the hot water not coming out. Hopefully, you’re now all clear. Go through the solutions to fix the problem asap. 


Question: What’s the ideal temperature for the water in the kitchen sink?

Answer: For most small households, the EPA suggests using 120 degrees. Since it’s hot enough to prevent disease but not so hot that it causes scorching. It uses relatively little energy. It’s possible that the ideal setting for you depends on a few different things.

Question: Will increasing the temperature of the water heater make the hot water remain longer?

Answer: The water heater’s thermostat should be raised to the maximum setting. Using less hot water while the temperature is higher will help your hot shower last longer. Raise the thermostat setting on the water heater tank to do this.

Question: What can I do to increase the amount of hot water?

Answer: You can do this by adding a tempering valve (a mixing valve) to your water heater. It will boost its hot water capacity if it is new, well-insulated, and in good condition. The tank’s water temperature can be raised significantly after the gadget is fitted.


Our conversation with you was brief about no hot water in the kitchen sink. When the hot water in a kitchen sink stops working, it is a usual problem to have. 

But you’ve now figured out how to resolve the issue. Replacing the sink is the only option if simple DIY techniques aren’t useful. 

Best of luck to you!