Kids love to play with kinetic sand. In fact, a lot of adults enjoy kinetic sand too. It’s not like your regular sand, so the cleaning process is a bit different, anyone can do it.
So, how to clean kinetic sand from carpet?
Kinetic sand is very easy to clean off your carpet. You don’t need any kind of water or carpet cleaner to do it. Simply use your hand to pick up the big pieces first. Then, you can use your vacuum cleaner to remove the rest of the sand.
However, this method only applies if the sand is on the surface of the carpet. It’s totally different when it gets deep inside your carpet after getting in touch with any kind of liquid.
If you’re still here that means you couldn’t remove the sand following the easy method. So, let’s not wait anymore. Here we go!
How to Clean Kinetic Sand From Carpet?
Removing kinetic sand from carpet is not that hard. You don’t even need any tools to clean these things. But the thing about kinetic sand is that it can be damaged by water. So, how do you clean kinetic sand that’s been inside your carpet for days or months?
Well, don’t worry. In this guide, you’ll know everything about it. So, here’s how you can clean kinetic sand from your carpet-
Step 1: Remove as much as Kinetic Sand You Can
The first thing that you'd like to do is sweep up as much sand as you can. It 's important as you need to remove most sand before it gets into your carpet 's fibers.
Otherwise, it gets permanent and you're going to have to bring in a professional. So, when you're cleaning make sure you are quick. You should clean with a floor cleaning brush.
Never put too much pressure on the carpet. It can make the problem worse by spreading even more of the sand.
Step 2: Make a Vinegar Solution
Now manage some white vinegar. White vinegar can also be used to remove the sticky feeling from your carpet. It will get rid of any of the colors of kinetic sand without causing any damage to the carpet.
You only need 1⁄3 cup of white vinegar and 2-3 cups of distilled water to make the solution.
Though you can prefer to use water from the tap. But we advise using distilled water as it will not interfere with any particles. In addition, distilled water is safer and cleaner.
In a spray bottle, combine the water with the white vinegar.
Step 3: Spray the Solution
The solution must be sprayed directly onto the area. Continue spraying until the area becomes damp. But don't spray so much that the carpet gets drenched.
Remember that you need to let the spray settle in for more than 2 minutes. Then wipe the solution up. As before, you could use a clean white rag or paper towel.
Now, the cycle must be repeated over and over until there is no vinegar left. This repetition will ensure you have reached nearly all of the fibers.
Related: How to Get Blood Out of Carpet
Step 4: Apply a Detergent Solution
Basically the detergent is a second layer of solution to remove the kinetic sand. So, after the vinegar solution, you'll need to apply a detergent solution. Now you need 1 cup of water and a few drops of dishwasher detergent to make the solution.
Any detergent works but dishwasher detergent can quickly dissolve. That is why we are proposing to use it.
These can be mixed in a bowl or in a spray bottle. Though it works better with the spray bottle.
Now spray some detergent solution over the area and use a clean rag or paper towel to blot it up. As before you've got to repeat the process until the solution is over.
Step 5: Rinse and Dry
First, pour a bit of clean water over the area. This will improve the efficiency of the vinegar and detergent. Blot the water with a clean cloth or paper towel after 2-3 minutes of waiting.
After the area has been rinsed, it's time to dry it out. Keep in mind that the carpet needs to dry out as quickly as possible. You see if the moisture won't get out for too long and it'll start its breeding process.
Switch on the fan to dry them out quickly. You can also use some silica gels instead of a fan. In a couple of hours, it will soak the liquid.
But you don't use a hairdryer. Your carpet can get damaged by the heat.
Step 6: Vacuum the Carpet
This is the final step of the process. By now you’ve removed all of the kinetic sand from your carpet. The only thing left to do is vacuuming the carpet.
However, you don’t need to use a steam cleaner in this case. That’s only necessary when you fix a matted down carpet.
Plug your vacuum cleaner into a socket and start vacuuming. Make sure to vacuum the carpet in straight lines. After doing it a few times, you’ll see that your carpet is once again as good as new.
Frequently Asked Questions (FAQs)
Question: Does kinetic sand get dirty?
Answer: Kinetic sand is nothing but regular sand with a polymer coating. So, it’ll stick to itself. Unless you somehow damage the sand, it won’t get dirty.
Question: Does kinetic sand hold germs?
Answer: No, you won’t get infected by anything through kinetic sand. In fact, it’s less messy than real sand.
Question: Does water ruin kinetic sand?
Answer: If it gets in touch with too much water, it can get damaged.
So, that’s all we had to say about how to clean kinetic sand from carpet. We hope we could answer every question you had. Still, there may have been some things we missed.
Share your experience with us. We’d love to hear how you did it.
- Time Taken to Retile a Bathroom: 4 Factors to Keep in Mind - February 23, 2021
- Shower Arm at the Wrong Angle: Easy Fix in 6 Steps - February 22, 2021
- Water Sitting in Shower Tray: 3 Reasons Behind the Mystery - February 22, 2021