Skip to Content

How To Use Oxiclean In HE Washer? [3 Different Methods]

Do you own a high efficiency washer and are confused about how to use oxiclean in it? Many are unaware of the right way to use it in HE washers. Well, that can be tricky because HE washers need HE detergent for washing. 

But today, we’ll clear out all your doubts!

How to use OxiClean in HE washer?

Oxiclean can be used directly with a high efficiency laundry detergent. Add 1-2 spoons of Oxiclean after mixing the detergent in the water. Simply, it will clean every stubborn stain on your clothes. Also, you can use OxiClean in the front load and top load option of your HE washer. 

You might be curious how to use these methods in the top load and front load washers. No worries! We’re here to assist you and ensure that you fully comprehend the methods. 

Let’s dive into the depth of it!

How To Use Oxiclean In HE Washer: 3 Easy Methods

How To Use Oxiclean In HE Washer? [3 Different Methods] 1

There are several ways to use Oxiclean in a High Efficiency Washer. You can directly use it with the detergent. There are other ways of using Oxiclean in the top load and front load washer. 

We have discussed 3 methods of using Oxiclean in HE washer. Each of them is easy to follow.

Let’s dive into the procedures then!

Method 1 of 3: Using Oxiclean With A High Efficiency Detergent

Many of us become confused if we can use detergent and OxiClean at the same time. Yes, you can add OxiClean with the detergent powder. But your detergent must be a high efficiency one at all cost.

First, you should fill the water in the washing machine. Colored and white garments should be washed in hot water rather than cold water. And fill your machine halfway with water and add 1/2 spoonful of  high efficiency detergent. Then fill the water with 1 tablespoon of OxiClean. While the water fills the machine, the detergent and OxiClean will combine.

Now, put a maximum of 10 clothes in the washing machine with this amount of Oxiclean. Know the capacity of your machine before putting the clothes inside. Then, dry the items in a clothes dryer. The stains on the dirty clothing in the washing machine will be lifted by the OxiClean.

The usage of OxiClean liquid is yet another viable option. In any case, it has the same impact.

Product 1
Product 2

You can use these detergents while washing your clothes. These products provide effective results with OxiClean in HE washer.

Method 2 of 3: Using Oxiclean in the Front Load 

How To Use Oxiclean In HE Washer? [3 Different Methods] 2

Your HE washer has both the front load and top load option. So you can use it with both options separately. In the front loader, a scoop of OxiClean will work fine. You can also use this to remove stuck bladders in pipes.

Anyway, to remove a spot stain, spray the stain, then wait a minute. Throw the clothing or linen in the washing machine after one minute. 

When using OxiClean, be sure you’re not also using bleach. Fill the tub with your laundry and water. When it’s time to fill it, leave the lid up. 

Now, add the powder, swirl it around, then seal the lid and let OxiClean do its thing. Your front load may lack an external dispenser. In that case, add one ounce of OxiClean Versatile Stain Remover with your powdered detergent.

It will help you to get the best result. Sometimes the minerals or elements in the water don’t let Oxiclean mix well with water. You can add water softener drain to the washing machine drain for help. 

It’s a little more difficult with a front loader since the lid locks instantly. Before shutting the door and pressing the “start” button, dilute the powder with water. Then pour it into the bleach dispenser. 

Methos 3 of 3: Using OxiClean in the Top Load 

How To Use Oxiclean In HE Washer? [3 Different Methods] 3

For the top loader option, set your washer to the highest temperature, highest setting, and longest time setting. Assemble all of your cleaning materials. To begin, dissolve one scoop of OxiClean in 4 cups of boiling water. Then, during the machine’s cycle, close the lid and shake it for a while.

Open the machine’s door or pause it for an hour to let it rest. The premise is that OxiClean may clean your gadget of germs, stains, and mold. If your washing machine is unclean, repeat the process after a time of satisfaction with vinegar.

Vinegar is excellent in removing buildup as well as softening soap scum. And other materials that accumulate in the washing machine and hoses. 

You can often face water leakage problems in your washing machine due to the unusual lengths of the hoses. Keep an ideal length of the washing machine drain hose to avoid leaking problems. It will save you from grout problems. 

Lastly, clean the outside, lid, and control panel with a damp cloth. But be careful not to get it too wet. Remove the bleach tank and clean the area around it where foam and grime accumulate. 

Then remove the softener tank from the machine and wipe the exterior and interior with your cloth.

Sometimes using bleach and vinegar in the washing machine can make it smelly. Especially bleach has a very strong odor. It gets smelly after cleaning the clothes. Even your clothes can smell like bleach after washing. Exactly like how the house smells like bleach after cleaning.

You can apply the same methods in the machine as well to remove the smell.

With that, you are done with your cleaning. Following these simple steps, you can use OxiClean in your high efficiency washer to get the best results.


Question: Can you add OxiClean to your washing machine?

Answer: An Oxi dispenser may be distinct from the detergent and/or chlorine bleach dispenser in some machines. The Deep Fill option, of course, increases the amount of water used throughout the wash cycle. How much extra depends on the amount of the load and the cycle selected.

Question: Can you use OxiClean instead of bleach in laundry detergent?

Answer: Instead of using harsh bleach on your fabrics, you can use OxiClean, which removes staining and spots without breaking down the fibers of the fabrics. In order to use OxiClean with your laundry detergent properly, it is important to follow a few guidelines that will ensure the OxiClean is added to the washing machine at the right time.

Question: What should you do with clothes soaked in OxiClean?

Answer: After rinsing your clothing or surface with clean water, try another OxiClean soak to see whether the stain disappears. Do not dry clothing or materials that have been soaked with OxiClean without first washing them completely. After soaking, a run through the washing takes care of the problem.

Question: How much OxyClean is enough to put in the front load washer?

Answer: Add the Oxyclean detergents booster premixed with the required amount of powdered laundry detergent to the front load washer during the prescribed washing cycle time. 1 oz. Oxyclean and 16 oz. water.


These were the methods we could share regarding how to use OxiClean in HE washer. We hope it helped you to understand the methods of using OxiClean in a HE washer. 

Now it’s your turn to apply these new methods at home.

All the best for these new cleaning tasks!